Wilo-Medana PE3
Series description
Your advantages
- Easy installation thanks to ready-to-plug and compact design
- Extremely low-noise (45 dbA) and thanks to its drinking water certification it can be used in a residential environment
- Safe operation due to numerous integrated protective functions
- Lower energy consumption thanks to automatic regulation
- User-friendly operating panel with control lamps
Safe and quiet pressure boosting in a residential environment.
The Wilo-Medana PE3 is a ready-to-plug, pressure boosting centrifugal pump, which is also suitable for use in residential environments thanks to its compact design and quiet operation. The pump is equipped with numerous protective functions and is easy to adjust via an operating button. LED control lights indicate the set operating mode at all times.
Construction
Non self-priming multistage centrifugal pump
Application
- Automatic low-noise water supply/pressure boosting for residential properties
Equipment/function
- Low-noise operation due to fluid-cooled motor
- Drinking water approval for all parts that come into contact with the fluid
- Electrical connection cable incl. mains plug
- Two constant speeds (Mode 1, Mode 2) in automatic or manual operation
- Control lamps (LED) for the operating status
- Pressure compensation vessel for constant operating pressure
- Thermal motor protection
- Integrated pressure sensor for:
- automatic operation,
- dry-running protection and overpressure protection
- Integrated temperature sensor for:
- motor blocking protection,
- excess temperature protection and anti-freezing protection
Scope of delivery
- Pump
- Installation and operating instructions
Type key
Example: | Wilo-Medana PE3-350EA |
Medana | Multistage Pump |
PE3 | PE = Pump ECO, 3 = Standard series |
35 | Performance indicator: 35 x 10 = 350 W |
0 | Serial number |
E | Frequency 50 Hz |
A | Automatic |
Technical data
- Mains connection 1~230 V ± 10 %, 50 Hz
- Connection (pressure side and suction side): Rp1
- Fluid temperature: 0 °C to +35 °C
- Ambient temperature: -10 °C to 50 °C
- Storage temperature -20 °C to +70 °C
- Max. inlet pressure: 1.5 bar (in operating mode 2)
- Max. operating pressure: 3.3 bar (in operating mode 2)
- Start-up pressure: 1.0 bar (operating mode 1) / 1.5 bar (operating mode 2 and 3)
- Switch-off pressure: 1.8 bar
- Protection class: IPX4
Materials
- Pump housing: Plastic
- Impeller: Plastic
- Shaft: Stainless steel
- Mechanical seal: Carbon/ceramic
Downloads
