DrainLift WS 40-50

Pump chamber made of plastic as concealed pumping station or floor-mounted lifting unit

Pumping of sewage containing faeces or pre-cleaned sewage that cannot be returned to the sewer system using natural falls, and for the draining of objects that are below the backflow level.

• Tank (for single or twin-head pump system)
• Built-in stainless steel pipework
• Gate valve in red bronze
• Surface coupling made of corrosion-free plastic (PUR) with built-in non-return valve
• Cover with seal (can be walked on, supporting a weight up to 200 kg)
• Hole saw Ø 124 mm, inlet seal DN 100 (for pipe Ø 110 mm)
• 1 PVC hose section Ø 50 mm with clamps for connection of a diaphragm hand pump
• Fixation material for floor fixation
• Installation and operating instructions

Notice! Pump is not included in the scope of delivery!

• Pump chamber: PE
• Pipework: 1.4404
• Surface coupling: PUR
• Non-return ball valve: Cast iron
• Gate valve: bronze

Installation-ready plastic shaft with complete pipework as single or double-pump system. Optimised chamber geometry for high inherent stability and anti-buoyancy for ground water. Surface coupling for quick and simple pump installation, non-return ball valve installed directly on the discharge port of the pump. Pump chamber incl. chain and chamber cover that can be walked on.

The pump chamber can be installed in buildings as a lifting unit, as well as outside buildings like a traditional pump chamber in the ground.

Technical data:

• Pump chamber height: 1000 mm
• Pump chamber height with extension: 1300 mm
• Inlet connection: DN 100/DN 150
• Ventilation: DN 70

• Pump chamber: PE
• Pipework: 1.4404
• Surface coupling: PUR
• Non-return ball valve: Cast iron
• Gate valve: bronze

Installation-ready plastic shaft with complete pipework as single or double-pump system. Optimised chamber geometry for high inherent stability and anti-buoyancy for ground water. Surface coupling for quick and simple pump installation, non-return ball valve installed directly on the discharge port of the pump. Pump chamber incl. chain and chamber cover that can be walked on.

The pump chamber can be installed in buildings as a lifting unit, as well as outside buildings like a traditional pump chamber in the ground.

Technical data:

• Pump chamber height: 1000 mm
• Pump chamber height with extension: 1300 mm
• Inlet connection: DN 100/DN 150
• Ventilation: DN 70