Motor cable for drinking water 3 inch motor | Wilo

Motor cable for drinking water 3 inch motor

Product selection

Product description	Description	Description 2	Article number
Motor cable for drinking water 3" motor, 4 x 1.5mm², 10 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	10 m	6080529
Motor cable for drinking water 3" motor, 4 x 1.5mm², 20 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	20 m	6080530
Motor cable for drinking water 3" motor, 4 x 1.5mm², 30 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	30 m	6080525
Motor cable for drinking water 3" motor, 4 x 1.5mm², 40 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	40 m	6080526
Motor cable for drinking water 3" motor, 4 x 1.5mm², 50 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	50 m	6080527
Motor cable for drinking water 3" motor, 4 x 1.5mm², 60 m	Kit with improved corrosion protection (stainless steel cable plug, extended insulation) for replacing existing connection cable on the motor. Consisting of a flat cable (4x1.5 mm²) with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Can be used for 1~230 V and 3~400 V. Suitable for use in drinking water. Only for use with the pumps TWU 3-…HS-B!	60 m	6080528