Atmos GIGA-I - 60Hz
In-line pump
The universal glanded pump for heating, air-conditioning and cooling applications in large buildings.
- Universal use in different applications, with different fluids and temperatures thanks to diverse components such as impellers, motor sizes and mechanical seals
- State-of-the-art pump hydraulics and IE3 motor technology for reliable and energy-saving operation
- Long service life thanks to corrosion-resistant cataphoretic coating of all cast components
- Targeted discharge of condensate when used in air-conditioning systems and chillers
- Easy installation with the possibility of securing the pump feet for maximum stability
- Easy maintenance and user-friendly design with optional back pull-out design and cartridge mechanical seal for large pumps
Wilo-Atmos GIGA-I
Number of results: [193]
Nominal flange diameter
Port-to-port length L0
0
[0]
Rated power P2
0
[0]
Number of poles
Recommended services
Wilo-Atmos GIGA-I 60 Hz 2pl
Design
Glanded pump in in-line design with flange connectionApplication
The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems.Type key
Example | Atmos GIGA-I 40/130-4/2/6 |
I | In-line pump |
40 | Nominal diameter DN |
130 | Nominal impeller diameter |
4 | Rated power P2 in kW |
2 | Number of poles |
6 | 60 Hz |
Technical data
- Permitted temperature range of the fluid: -20 °C to +140 °C
- Max. ambient temperature 40 °C
- Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
- Mains connection 3~380 V, 60 Hz (others on request)
- IP rating IP55
- Nominal diameter DN 32 to DN 200
- Standard version for operating pressure: 13 bar (up to +140 °C) / 16 bar (up to +120 °C)
Materials
- Pump housing and lantern: Standard: EN-GJL-250;
- Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10 stainless steel 1.4408
- Shaft: 1.4122
- Mechanical seal: AQEGG; other mechanical seals on request
Construction
Single-stage, low-pressure centrifugal pump in in-line design with
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Lantern
- Coupling
- IEC standard motor
Scope of delivery
- Pump
- Installation and operating instructions
Options
- …-L1 variant with bronze impeller (at additional charge)
- …-L4 variant with stainless steel impeller (at additional charge)
- ...-P6 variant with back pull-out design and cartridge mechanical seal
- …-H1 variant with housing made of ductile cast iron on request
- ...-P4 variant for max. operating pressure of 25 bar on request
- ...-P2 variant: Drinking water version on request
- Other voltages and frequencies as well as ATEX approval on request