Wilo-SiBoost Smart Helix EXCEL

Series description

Special features/product advantages

  • Heavy-duty system featuring stainless steel high-pressure multistage centrifugal pump from the Helix EXCEL series with integrated frequency converter from 25 Hz to a maximum of 60 Hz
  • High-efficiency EC motor (energy efficiency class IE5 in accordance with IEC 60034-30-2)
  • Pressure-loss optimised overall system with highly efficient pump hydraulics
  • Optimum load adjustment of the system to the overall system through the extra control mode Δp-v
  • Improved monitoring and leakage detection via optional interface with SCADA connection
  • Maximum degree of control thanks to use of an SCe control device with LCD display, simple navigation and adjustment using rotary knob
  • Integrated dry-running detection with automatic deactivation via the motor control electronics

Description

In densely populated rural areas, the transportation of water is often associated with leakage risks. This results in high operating costs. Our solution: the Wilo-SiBoostSmart Helix EXCEL significantly reduces overall power consumption thanks to its top-quality components (hydraulics and motors) as well as a switchgear which supports leakage detection via an optional communication interface.

Design type

Highly efficient water-supply unit (non self-priming) ready for connection with 2 to 4 vertically arranged Helix EXCEL stainless steel high-pressure centrifugal pumps switched in parallel; each pump is equipped with an integrated air-cooled, high-efficiency frequency converter and an EC motor, including Smart Controller SCe. Valves and sensors are protected for safe and reliable installation

Application

  • Fully automatic water supply and pressure boosting in inlet mode, either from the public water supply network or from a tank, for domestic, commercial, industrial and municipal applications (e.g. residential, office, administration buildings, hotels, hospitals, trades, industry, water supply companies).
  • Pumping of drinking water and process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Equipment/function

  • 2 – 4 pumps per system of the Helix EXCEL 4 to Helix EXCEL 52 series, with high-efficiency EC motor and continuous speed control via integrated frequency converter on each pump
  • Automatic pump control via Smart Controller SCe
  • Parts that come in contact with the fluid are corrosion-resistant
  • Base frame made of galvanised steel, with height-adjustable vibration absorbers for insulation against structure-borne noise
  • Shut-off device on the suction and pressure sides of each pump
  • Non-return valve on the pressure side of each pump
  • Diaphragm pressure vessel 8 l, PN 16, pressure side
  • Pressure sensor, pressure side
  • Pressure gauge, pressure side
  • Removable cover for protection of system components (not for Helix EXCEL 52 series)
  • Optional low-water cut-out switchgear with pressure gauge, suction side

Scope of delivery

  • Factory-mounted, ready-for-connection pressure-boosting system checked for functionality and impermeability
  • Packaging
  • Installation and operating instructions

Type key

Example:

Wilo-SiBoost-Smart 3 Helix EXCEL 1005

SiBoost

System for pressure boosting in the commercial area

Smart

Control device, Smart Controller SCe

3

Number of single pumps

Helix EXCEL

Pump series

10

Rated volume flow [m3/h] of single pump

05

Number of single pump stages

Technical data

  • Mains connection 3~400 V ± 10%, 50 Hz; 3~380 V ±10 %, 60 Hz
  • Max. fluid temperature +50 °C (+70 °C optional)
  • Max. ambient temperature of 40 °C
  • Operating pressure 16 bar (25 bar optional)
  • Inlet pressure 10 bar
  • Nominal connection diameters on discharge side R 1½" - DN 200
  • Nominal connection diameters on intake side R 1½" - DN 200
  • Speed range 1500 – 3770 rpm
  • Protection class: IP54 (SCe control device)
  • Fuse protection A on mains side, AC 3 according to motor power and EVU regulations
  • Approved fluids (other fluids on request): Note on fluids: Approved fluids are generally waters which do not attack the materials used, neither chemically nor mechanically, and do not contain any abrasive or long-fibre constituents. System in accordance with DIN 1988 (EN 806)
    • Drinking water and hot water
    • Cooling water
    • Firefighting water

Materials

Helix EXCEL 4 to Helix EXCEL 16

  • Impellers, guide vanes, stage housing made of stainless steel 1.4307
  • Pump housing of stainless steel 1.4301
  • Shaft of stainless steel 1.4057
  • 1.4404 shaft protection sleeve
  • O-Ring gaskets made of EPDM (FKM gasket on request)
  • Piping made of 1.4301 stainless steel
  • Removable covers made of plastic

Helix EXCEL 22 to Helix EXCEL 52

  • Impellers, guide vanes, stage housing made of stainless steel 1.4307
  • Pump housing of stainless steel 1.4308
  • Shaft of stainless steel 1.4057
  • 1.4404 shaft protection sleeve
  • O-Ring gaskets made of EPDM (FKM gasket on request)
  • Piping made of 1.4301 stainless steel
  • Removable covers made of plastic (not for Helix EXCEL 52)

Description/construction

  • Base frame: galvanised steel, with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise as well as an integrated lifting device; other versions on request
  • Pipework: complete pipework made of stainless steel, suitable for the connection of all conventional piping materials; the pipework is dimensioned according to the overall hydraulic performance of the pressure boosting system
  • Pumps: 2 to 4 pumps parallel-switched of the Helix EXCEL 4 to Helix EXCEL 52 series. The air-cooled frequency converters mounted on the pump motor enable infinitely variable control between 25 Hz and a maximum of 60 Hz for all pumps of this series. All pump parts which come into contact with the fluid are made of stainless steel; other versions on request. KTW/WRAS/ACS approval for all parts that come in contact with the fluid
  • Valves: Each pump is fitted on the suction and pressure side with a standard shut-off device with DVGW approval mark and on the pressure side with a DVGW/KTW-approved non-return valve.
  • Diaphragm pressure vessel: 8 l/PN 16 arranged on the discharge side with a diaphragm made of butyl rubber, with DVGW/KTW approval, completely safe in accordance with food safety laws; for testing and inspection purposes, with a shut-off ball cock with drain and throughflow fitting with DVGW/KTW approval in accordance with DIN 4807
  • Pressure sensor: 4 to 20 mA, located on the discharge side for controlling the central Smart Controller SC
  • Pressure indication: Pressure gauge (ø 63 mm) arranged on the discharge side; additional digital indication of the discharge pressure in the alphanumeric LC display of the Smart Controller SC
  • Control device/controller: The system is equipped with a Smart Controller SC as standard
  • Removable covers on the suction side and pressure side: the design of the system guarantees optimal protection of the regulating components and sensors against wire breakage and prevents early wear

Downloads

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

Product

PDF: Wilo-SiBoost Smart Helix EXCEL

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download