A4D 80-12 PN10 | Wilo

A4D 80-12 PN10

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO-D 80/0,5-12 PN 10	Yonos MAXO-D 80/0,5-12 PN 10	A4D 80-12 PN10
Article number	2164663	2120673	-
Series	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	360 mm	360 mm	400 mm
Pump connection	DN 80	DN 80	-
Display	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Change piping	Change piping	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-
	Dynamic Adapt plus	-	-
	ΔT-const. for constant differential temperature control	-	-
	T-const. for constant temperature control	-	-
	Constant Q for constant volume flow control	-	-
	Multi Flow Adaptation	-	-
	Δ T-const. for constant differential temperature control	-	-
	User-defined PID control	-	-
	Constant speed (n-const.)	-	-
	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-
	Night set back	-	-
	Heat quantity measurement	-	-
	Cooling quantity measurement	-	-
	Key locking function	-	-
	No-Flow Stop	-	-
	Reset function to factory setting	-	-
	Adjustable volume flow limiter	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-
	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	Main/Standby	-
	Parallel operation	-	-
Measurement value logging	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	-
	Actual delivery head	-	-
	Actual volume flow	-	-
	Actual power consumption	-	-
	Energy consumption	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	Warning messages in plain text (display status: yellow)	-	-
	Error messages in plain text (display: red)	-	-
	Pump venting (display status: blue)	-	-
	Control mode	-	-
	Active influences (e.g. STOP)	-	-
Display (can also be selected)	Speed	-	-
	Heating quantity	-	-
	Cooling quantity	-	-
	Operating hours	-	-
	Mains voltage	-	-
	Warning message	-	-
	Error message	-	-
Pump venting function	Yes	-	-
Dry-running detection	yes	-	-
Equipment
Thermal insulation shell	No	-	-
Cold water insulation shell	No	-	-
Quick electrical connection	Wilo Connector	Wilo plug	-
Blocking-current proof motor	yes	-	-
Particle filter	yes	-	-
Key lock	yes	-	-
Fluid temperature sensor	Integrated	-	-
Connectivity
Analogue signal as standard	0-10 V	-	-
	2-10 V	-	-
	4-20 mA	-	-
	0-20 mA	-	-
	PT1000	-	-
Digital output	SSM	SSM	-
	SBM	-	-
	-	SBM (via Connect module)	-
Digital input	Ext. OFF	-	-
	Ext. MIN	-	-
	Ext. MAX	-	-
	MANUAL (BMS-OFF)	-	-
	Key lock	-	-
	Switchover between heating/cooling mode	-	-
	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-
	LON	-	-
	Modbus RTU	-	-
	CANopen	-	-
	PLR	-	-
	BACnet IP	-	-
	Modbus TCP	-	-
Access via the Wilo-Assistant app	Yes	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	Bluetooth	-	-
Motor data
Phases	1	1	3
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI)	≤0.17	≤0.23	-
Min current I_min	0.3 A	0.3 A	-
Max current I_max	6.13 A	6.8 A	-
Rated power P₂	1212 W	1300 W	-
Min. speed n_min	500 1/min	900 1/min	-
Max. speed n_max	3050 1/min	3300 1/min	-
Power consumption P_{1 min}	20 W	40 W	-
Power consumption P_{1 max}	1410 W	1550 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PP-LGF50	-
Shaft	1.4028, DLC-coated	Stainless steel	-
Bearing	Carbon, antimony-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	DN 80	DN 80	-
PN connection on suction side	PN 10	PN 10	-
Outlet connection	DN 80	DN 80	DN 80
PN connection on discharge side	PN 10	PN 10	PN 10
Dimension, weight
Length with packaging	800 mm	550 mm	-
Length L	360 mm	360 mm	-
Height with packaging	525 mm	425 mm	-
Height H	463 mm	439 mm	-
Width with packaging	600 mm	530 mm	-
Width W	570 mm	424 mm	-
Gross weight, approx. m	70.5 kg	60.6 kg	-
Net weight, approx. m	65.2 kg	56.6 kg	-
Ordering information
Product description	Stratos MAXO-D 80/0,5-12 PN 10	Yonos MAXO-D 80/0,5-12 PN 10	A4D 80-12 PN10
Brand	Wilo	Wilo	Perfecta
EAN number	4048482700052	4048482408033	-
Article number	2164663	2120673	-

Data sheet

Description
Product description	A4D 80-12 PN10
Brand	Perfecta
Port-to-port length l0	400 mm

Motor data
Phases	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Outlet connection	DN 80
PN connection on discharge side	PN 10

Pompa që do të shkëmbehet nuk ndodhet në bazën e të dhënave

Dëshëroni të shkëmbeni një pompë, por ajo nuk ndodhet (ende) në bazën e të dhënave. Pavarsisht nga madhësia e bazës së të dhënave, ka mundësi që pompa juaj nuk gjendet. Ne do jemi të lumtur të gjejmë se cila pompë përshtatet per ju dhe ta shtojmë atë tek baza jonë e të dhënave.

Hiqni dorë tani nga pompa që mungon!