Wilo-CronoBloc-BL
Product description | Number of poles | MEI | IE | Nominal flange diameter | Mechanical seal | Rated power P2 | Gross weight, approx. m | Article number | GRD group |
---|---|---|---|---|---|---|---|---|---|
CronoBloc-BL 50/295-5,5/4 | 4 | ≥0.4 | IE3 | DN 50 | AQ1EGG | 5.5 kW | 217 kg | 9140219 | 13 |
CronoBloc-BL 50/305-7,5/4 | 4 | ≥0.4 | IE3 | DN 50 | AQ1EGG | 7.5 kW | 223 kg | 9140217 | 13 |
CronoBloc-BL 50/315-11/4 | 4 | ≥0.4 | IE3 | DN 50 | AQ1EGG | 11 kW | 243 kg | 9140216 | 13 |
CronoBloc-BL 65/105-0,55/4 | 4 | ≥0.4 | IE2 | DN 65 | AQ1EGG | 0.55 kW | 53 kg | 9132649 | 12 |
CronoBloc-BL 65/115-0,75/4 | 4 | ≥0.4 | IE3 | DN 65 | AQ1EGG | 0.75 kW | 56 kg | 9132648 | 12 |
CronoBloc-BL 65/125-1,1/4 | 4 | ≥0.4 | IE3 | DN 65 | AQ1EGG | 1.1 kW | 64 kg | 9132647 | 12 |
Design
Glanded pump in block design with flange connection
Application
For pumping heating water (in accordance with VDI 2035), water-glycol mixtures, cooling water and chilled water without abrasive substances in heating, chilled water and cooling water systems.
Typekey
Example | BL 40/160-4/2 |
BL | Monobloc pump |
40 | Nominal diameter DN of the pipe connection (pressure port) |
160 | Nominal impeller diameter |
4 | Rated motor power P2 in kW |
2 | number of poles |
Technical data
- Permissible temperature range of -20 °C to +140 °C
- Mains connection 3~400 V, 50 Hz (others on request)
- Protection class IP55
- Nominal diameter DN 32 to DN 150
- Max. operating pressure 16 bar (optionally 25 bar on request)
Materials
- Pump housing and lantern: Standard: EN-GJL-250; optional: Spheroidal cast iron EN-GJS-400-18-LT (depending on type)
- Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10 stainless steel 1.4408 (depending on type)
- Shaft: 1.4122
- Mechanical seal: AQEGG; other mechanical seals on request
Construction
Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port with
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Lantern
- Coupling
- IEC standard motor
Scope of delivery
- Pump
- Installation and operating instructions
Options
- ...-L1 variant with bronze impeller (at additional charge)
- …-L4 variant with stainless steel impeller (at additional charge)
- ...-H1 variant with housing made of spheroidal cast iron (at additional charge)
- ...-P6 variant with "back pull-out design and cartridge mechanical seal (at additional charge)
- Other voltages and frequencies as well as ATEX approval on request
Accessories
- Bases (pump housing and motor) for installation on a base
- PTC thermistor sensor, PTC thermistor tripping relay
- Special motors
- Special mechanical seals
- SC-HVAC, CC-HVAC control systems and switchgears
Installation and operating instructions
Consulting manual
Pompa që do të shkëmbehet nuk ndodhet në bazën e të dhënave
Dëshëroni të shkëmbeni një pompë, por ajo nuk ndodhet (ende) në bazën e të dhënave. Pavarsisht nga madhësia e bazës së të dhënave, ka mundësi që pompa juaj nuk gjendet. Ne do jemi të lumtur të gjejmë se cila pompë përshtatet per ju dhe ta shtojmë atë tek baza jonë e të dhënave.
Hiqni dorë tani nga pompa që mungon!