Fully submersible sewage lifting unit ready for connection with solids separation system in accordance with DIN EN 12050-1. With the solids separation system version, coarse solids are separated before the pumps and do not come into contact with them, thereby maximizing operational reliability. All-in-one gas-tight and watertight collection reservoir without constructive welded joints, as well as two separately-lockable and externally maintainable solids separation reservoirs. Individual shut-off makes it possible to carry out maintenance work during operation. Pumping is performed by two high-performance submersible sewage pumps in dry well installation that run in alternating operation. The dry well installation of the pumps and their configuration as a redundant double-pump system ensures maximum hygiene, ease of maintenance, and operational reliability. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. Quick connector to the pumps and the inspection opening facilitate maintenance work. Separate blocking of the solids separation reservoir facilitate maintenance while the unit is in operation. Manual backwashing in the collection reservoir reinforces the cleaning effect through additional turbulences and the transparent cover on the distributor box allows easy visual inspection of the unit. Level control is carried out using a level probe.

Scope of delivery

• Submersible pump solids separation system with two dry well installation submersible pumps
• 2x gate valve for solids separation reservoir
• 2x non-return valve on the pressure side in rectangular design
• 2x gate valve on the pressure side
• Consolidation of the pressure outlet line
• 1x level probe
• 1x floor fixation as cross beam
• 2.5 m aeration and venting hose
• 1x maintenance set with blind flange

Recommended accessories

• Wilo-Control SC-L-…-FTS switchgear
• Inlet slide valve

Operating data

• Fluid media
  Water

Approved field of application

• Maximum operating pressure PN
  6 bar

Product data

• Gross volume of the tank V
  1200.0 l
• Switching volume V
  900.0 l
• Operating mode (non-immersed)
  S1
• Height H
  1865 mm
• Length L
  1830 mm
• Width W
  1760 mm

Motor data

• Mains connection
  3~400 V, 50 Hz
• Voltage tolerance
  ±10 %
• Rated power P₂
  1.20 kW
• Rated speed n
  2913 rpm
• Rated current I_N
  2.65 A
• Insulation class
  H
• Protection class motor
  IP68
• Activation type
  Direct online (DOL)
• Max. switching frequency t
  30 1/h
• Motor protection
  WSK

Cable

• Mains plug
  no

Materials

• Tank material
  PE
• Pump housing
  EN-GJL-250
• Impeller
  EN-GJL-250
• Motor housing
  EN-GJL-250

Installation dimensions

• Pipe connection on the suction side
  DN 200
• Pipe connection on the pressure side
  DN 80
• Connection venting
  Ø 75

Information for order placements

• Brand
  Wilo
• Product description
  EMUport CORE 45.2-9B
• Net weight, approx. m
  515 kg
• Article number
  6080607