Wilo-Drain LPC

Your advantages

• Long service life thanks to its robust construction in grey cast iron
• Easy maintenance due to integrated inspection opening
• Flexible application

Construction

Self-priming drainage pump with standard motor for dry well installation

Application

Pumping of

• Wastewater
• Process water

Equipment/function

-

Scope of delivery

• Pump
• Installation and operating instructions

Type key

Technical data

• Mains connection: 3~400 V, 50 Hz
• Protection class: IP55
• Fluid temperature: 3 ... 80 °C
• Suction and pressure connection:
• LPC 40: R 1½
• LPC 50: G 2
• LPC 80: G 3
• Max. suction head: 7.5 m

Materials

LPC 40

• Pump housing: AlSi
• Impeller: EN-GJL-250
• Shaft: 1.4104
• Mechanical seal: C/Al
• Static gaskets: NBR
• Motor housing: Al

LPC 50

• Pump housing: EN-GJL-250
• Impeller: EN-GJL-250
• Shaft: 1.4104
• Mechanical seal: C/Al
• Static gaskets: NBR
• Motor housing: Al

LPC 80

• Pump housing: EN-GJL-250
• Impeller: EN-GJL-250
• Shaft: 1.4104
• Mechanical seal: SiC/SiC
• Static gaskets: NBR
• Motor housing: Al

Description/construction

Self-priming centrifugal pump in monobloc design for portable and stationary dry well installation, not submersible.

LPC 40

Hydraulics with a horizontal suction connection and vertical pressure connection with an integrated non-return valve. A multi-channel impeller is used as the impeller. Drive is provided by a standard motor. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.

LPC 50, LPC 80

Hydraulics with a horizontal suction connection and a vertical pressure connection. A multi-channel impeller is used as the impeller. An inspection opening on the hydraulics facilitates the cleaning of the impeller and the pump housing. Drive is provided by a standard motor. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.