Wilo-Drain TP 80/TP 100

Series description

Special features/product advantages

  • Self-cooling motor for use in wet well and dry well installation
  • Corrosion-resistant stainless steel motor housing made of 1.4404
  • Patented clogging-free hydraulics
  • Longitudinally watertight cable inlet
  • Lightweight

Design type

Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as stationary dry well installation.

Application

Pumping of

  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Process water
  • Wastewater

Equipment/function

  • Thermal motor monitoring
  • Leakage detection in the motor
  • ATEX approval
  • Sheath current cooling

Scope of delivery

  • Pump ready for connection with 10 m connection cable (bare cable end)
  • Installation and operating instructions

Type key

E.g.

Wilo-Drain TP 80E160/17

TP

Submersible pump

80

Nominal diameter [mm]

E

Single-channel impeller

160

Nominal diameter of impeller [mm]

17

Power P2 [kW] = (value/10 = 1.7 kW)

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Immersed and non-immersed operating modes: S1
  • Protection class: IP68
  • Insulation class: F
  • Max. fluid temperature: 3 - 40 °C
  • Free ball passage: 80 or 95 mm
  • Max. immersion depth: 20 m

Materials

  • Pump housing: PUR
  • Impeller: PUR
  • Shaft: Stainless steel 1.4404
  • Mechanical seal on pump side: SiC/SiC
  • Mechanical seal on motor side: C/Cr
  • Static gasket: NBR
  • Motor housing: Stainless steel 1.4404

Description/construction

Submersible sewage pump as submersible monobloc unit for stationary wet well and dry well installation as well as portable wet well installation.

Hydraulics

The outlet on the pressure side is designed as DN 80 or DN 100 horizontal flange connections. Single-channel impellers are used as the impeller shape.

Motor

Surface-cooled motors are standard-equipped with clogging-free sheath current cooling. This ensures that heat is given off directly to the fluid. As a result, these units can be operated in immersed and non-immersed state for permanent or intermittent operation.

In addition, the motor is equipped with a leakage detection unit and a thermal motor monitoring unit. A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe.

The cable lead-in is longitudinally watertight, the standard cable length is 10 m.

Seal

Sealing on the fluid side and on the pump side is achieved by two bidirectional mechanical seals.

Duty chart

Wilo-Drain TP 80/100

Downloads

Wilo-Drain TP 80E/100E - Installation and operating instructions - 50 Hz

Article Number 6060910
Edition 2017-06
Version number 04
Page format 209.9 x 297.0 mm
Number of pages 200

PDF (11 MB)

Shkarko

Produkti

PDF: Wilo-Drain TP 80/TP 100

Konfiguro

Përzgjedhja e faqes

Madhësia e faqes

Informacione fakultative

Mund të futni çdo informacion personal që dëshironi të shfaqni në kokë.

Shkarkime