PDF: Wilo-Rexa FIT

Konfiguro

Përzgjedhja e faqes

Madhësia e faqes

DIN A4

letër

Informacione fakultative

Mund të futni çdo informacion personal që dëshironi të shfaqni në kokë.

Shkarkime
Special features/product advantages
  • Ready to plug in and use
  • Attached float switch (A-model) enables easy operation
  • Safe vortex hydraulics with large, free ball passage to prevent clogging during operation
  • Sealing chamber with optional external monitoring
  • Low weight

Design

Submersible sewage pump for intermittent operation for stationary and portable wet well installation, as well as for the stationary dry well installation.

Application

Pumping of

  • Sewage containing faeces in accordance with EN 12050-1
  • Wastewater

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10%
  • Protection class: IP 68
  • Insulation class: F
  • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
  • Free passage: 50 / 65 / 80 mm
  • Cable length: 10 m


Type key

Example:Wilo-Rexa FIT V06DA-110/EAD1-2-T0015-540-A
RexaSubmersible sewage pump
FITSeries
VVortex impeller
06Nominal diameter of pressure connection e.g. DN 65
DHydraulics drilled on the suction side in accordance with DIN drilled
AMaterial version, hydraulics
A = standard version
110Hydraulics definition
Edry motor
AMaterial version, motor
A = standard version
DSeal with two independent mechanical shaft seals
1IE efficiency class, e.g. 1 = IE1 (derived from IEC 60034‑30)
-not Ex-rated
2Number of poles
TMains connection version:

M = 1~

T = 3~

0015Value/10 = motor power P2 in kW
5Frequency (5 = 50 Hz, 6 = 60 Hz)
40Code for rated voltage
AAdditional electrical equipment:

O = with bare cable end

P = with plug

A = with float switch and plug


Detajet dhe shkarkimet


Produkti