Wilo-Sevio AIR

Special features/product advantages

  • High system efficiency owning to high ventilation capacity.
  • High flexibility in the system control through large control range of the air intake.
  • Greatest possible, process-specific activation density by taking different basin geometries into account.
  • High service life in municipal and industrial applications owing to different diaphragm material.
  • Low installation and conversion costs of the existing pipework.

Series description

Design

Aeration system with tube, panel or disc diffusers

Application

For large to fine-bubble aeration of aqueous media such as water, sewage or sludge, for the purpose of supplying oxygen and intermixing.

Type key

E.g.:Wilo-Sevio AIR D 218-ES-S-30
AIRAerator series
DDisc diffuser
218Diameter of perforated surface in mm
ESDiaphragm material
ES = EPDM
ER = EPDM with reduced plasticizer
S = silicon
SSystem including pipework and fixation material
30Number of aerators

Technical data

Disc diffuser

  • Diameter of perforated surface: 218 mm
  • Diaphragm surface area: 0.037 m²
  • Operating temperature air: 5…100 °C (depending on the membrane material)
  • Operating temperature pumped fluid: 5…40 °C
  • Max. loading: 15 Nm³/h

Panel diffuser

  • Diaphragm surface area: 0.24 m² or 0.32 m²
  • Operating temperature air: 5…60 °C
  • Operating temperature pumped fluid: 5…40 °C
  • Max. loading: 76 Nm³/h

Tube diffuser

  • Diaphragm surface area: 0.09, 0.135 or 0.18 m²
  • Operating temperature air: 5…100 °C (depending on the membrane material)
  • Operating temperature pumped fluid: 5…40 °C
  • Max. loading: 20 Nm³/h

Equipment/function

A fan or compressor pumps air into the air distributer via the mains supply line. The air distributer distributes the air evenly to the individual ventilation lines and the diffusers. The diffusers diffuse the air over the entire diaphragm surface and channel it into the fluid in the form of large to fine bubbles.

Description/design

The aeration system is composed of one or more aerator fields. An aeration system can consist of different aerator fields (tube diffusers, panel diffusers or disc diffusers). An aerator field forms the basic unit here and consists of several components:

  • Inlet pipe (for panel diffusers)
  • Air distributor with connection flange for the inlet pipe (for disc and tube diffusers)
  • Base support for pipework
  • Pipework
  • Aerator
  • Drainage connection (in the case of disc or tube diffusers)

Fastening

Panel diffuser:

The inlet pipe and the diffusers are fastened directly to the basin floor. For a levelling, the diffusers can optionally be fastened at the base via threaded rods.

Tube and disc diffusers:

Base supports are used to fully attach the pipework to the bottom of the basin. These also enable levelling of the aerator system.

Diffuser

The supplied air is channelled into the fluid via the diffuser in the form of large to fine bubbles. The air is diffused here via the entire perforated diaphragm surface and discharged through the diaphragm.

Materials

  • Diaphragm: EPDM (for tube and disc diffusers), PUR (for panel diffusers), other materials on request
  • Housing: Plastic
  • Pipework: Plastic or stainless steel
  • Drainage connection: Plastic
  • Base support: Stainless steel (for tube and disc diffusers), plastic (for panel diffusers)

Scope of delivery

  • Mains supply line (for panel diffusers)
  • Air distributor with flange connection for the inlet pipe (for tube and disc diffusers)
  • Pipework
  • Drainage connection
  • Base support
  • Fixation material
  • Assignment plan for base support and diffuser
  • Overview and layout of the individual components

Downloads

General overview

Edition 2017
Page format A4
Number of pages 72

PDF (46 MB)

Shkarko

PDF: Wilo-Sevio AIR

Konfiguro

Përzgjedhja e faqes

Madhësia e faqes

Informacione fakultative

Mund të futni çdo informacion personal që dëshironi të shfaqni në kokë.

Shkarkime