Wilo-Initial Drain


Wilo-Initial Drain
Veçoritë/avantazhet e produktit
- Easy installation in narrow shafts due to its compact design and low weight
- Operationally reliable due to self-switched motor protection
- Easy operation due to fitted float switch
Shërbimet e rekomanduara
Wilo-Initial Drain
Konstruksioni
Submersible pump for fully automatic operation in portable wet well installation.
Lëngje
For the pumping in domestic areas of wastewater with small amounts of sand and gravel.
Tërësia e pajisjeve/funksionimi
- Self-switching thermal motor monitoring
- Integrated capacitor
- Fitted float switch
Çelësi tip
Example | Wilo-Initial DRAIN 10-7 |
Initial | Series |
Drain | Wastewater pump |
10 | Nominal flow in m³/h |
7 | Nominal head in m |
Të dhënat teknike
- Mains connection: 1~230 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S3 25%
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 ... +40 °C (37 ... 104 °F)
Materiale
- Hydraulics housing: PP
- Impeller: PA6-GF30
- Motor housing: 1.0038 (steel)
- Seal:
- Pump/motor: NBR
- Static: NBR
- Shaft end: 1.4005 (AISI 416)
Konstruksioni
Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (CEE 7/7).
Dorëzim
- Pump
- Hose connection Ø 24/32 mm, enclosed
- Installation and operating instructions
Emërtimi i produktit | Dalja e presionit | Fuqia nominale e motorit P2 | Gjatësia e kabllos së lidhjes | Linja ushqyese | Numri i artikullit | |
---|---|---|---|---|---|---|
Initial DRAIN 10-7 | G 1½ | 0,37 kW | 10 m | 1~230 V, 50 Hz | 4168021 | |
Initial DRAIN 13-9 | G 1½ | 0,5 kW | 10 m | 1~230 V, 50 Hz | 4186548 |