Wilo-EMUport CORE
Separate and transport solid substances. Clean, safe and reliable.
Separate and transport solid substances. Clean, safe and reliable.
Coarse solids can clog the sewage transport system especially around buildings and real estate development. The consequence: breakdowns and increased service costs. Wilo’s durable solution: the solids separation system Wilo-EMUport CORE. It provides the best operational reliability for clog-free transport. Moreover, it provides easy maintenance thanks to its hygienic dry well installation and easy access from outside. The complete system including a corrosion-free pump chamber and switching systems is also available for larger Wilo units. Tailored exactly to your requirements.
Recommended services
Your advantages
- Maximum reliability by separating solids from the sewage: Large solids do not have to pass through the pump – no clogging
- Economic thanks to a retrofit system for simple renovation of old pumping stations
- Durable and corrosion-free due to the use of PE and PUR material
- Easy maintenance, even during operation – thanks to hygienic dry well installation and easy access from outside and individual shut-off
- Future-proof even with more solid content in the sewage
- Flexible installation in buildings or in chambers from 1,500 mm diameter
- Easy to integrate and ready for connection Plug&Pump system
- Energy savings thanks to efficient submersible sewage pumps, optionally with IE3 motors
Design
Standard sewage lifting unit with solids separation system in accordance with DIN EN 12050-1 for installation in a building or in a pump chamber for outdoor installation.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be led to the sewer system via a natural downward slope
- For backflow resistant drainage
Equipment/function
- Two solids separation reservoirs that can be shut off individually
- Level measurement with level sensor
- Manual backwashing in the collection reservoir
- Discharge connection with flange connection
- Transparent cover on the supply box/distributor.
- Two dry-installed submersible sewage pumps in alternating operation
- Submersible sewage pumps with moisture monitoring for motor compartment and sealing chamber
Typekey
Example: | Wilo-EMUport CORE 20.2-10/540 |
CORE | Standardised solids separation system |
20 | Max. inlet in m³/h |
2 | Number of installed pumps |
10 | Max. delivery head in m |
5 | Mains frequency:
|
40 | Mains voltage:
|
Technical data
- Mains connection: 3~400 V, 50 Hz
- Max. continuous inlet: 20, 45 or 60 m³/h
- Max. delivery head: 55 m
- Positive suction head: 750 mm
- Inlet connection: DN 200
- Discharge connection:
- CORE 20.2: DN 80
- CORE 45.2/60.2: DN 100
- Tank volume:
- CORE 20.2: 40 l
- CORE 45.2/60.2: 1200 l
- Useable tank volume:
- CORE 20.2: 295 l
- CORE 45.2/60.2: 900 l
Materials
- Collection reservoir: PE
- Solids separation reservoir: PE
- Supply box: PUR
- Pipework: PE
- Pumps: Grey cast iron
- Gate valve: Grey cast iron
- Discharge connection: PUR
Construction
Fully submersible and automatically operating sewage lifting unit with solids separation system and two submersible sewage pumps in alternating operation without peak-load operation.
Solids separation system with all-in-one gastight and watertight collection reservoir without constructive welded joints, as well as two separately lockable solids separation reservoirs. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. With pre-filtering in the solids separation reservoirs, the solids are filtered from the fluid and only pre-filtered sewage is directed to the collection reservoir.
Pumping is performed by two high-performance submersible sewage pumps in dry well installation. The pumps are designed as a redundant system and run in alternating operation.
The level control is controlled by a level sensor.
Scope of delivery
Installation-ready sewage lifting unit is completely pre-assembled including Y-piece, level sensor and two pumps.
Options
- Switchgear that has been designed specifically for the solids separation system “SC-L...FTS”
- Inductive flow rate measuring instrument
- Intake and pressure release adapters
- Submersible sewage pumps with IE3 motor
Installation and operating instructions
Wilo-EMUport CORE
| Article Number | 6092612 |
| Edition | 2022-01 |
| Number of pages | 32 |
PDF (6 MB)Certification booklet
Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2
| Article Number | 2546469 |
| Edition | 2021-07 |
| Number of pages | 40 |
PDF (3 MB)