Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Comfort CO-6 Helix V 605/K/CC | Wilo

Actual product may vary from photo

Comfort CO-6 Helix V 605/K/CC

Article number: 2535368
Technical data
Hydraulic data
Maximum inlet pressure p inl 10 bar
Maximum operating pressure PN 16 bar
Pipe connection on the discharge side DNd R 3
Pipe connection on the suction side DNs R 3
Number of pumps 6
Number of stages -
Number of standby pumps 1
Number of operating pumps 5
System output without standby pump Q 50 m³/h
Min. fluid temperature Tmin 3 °C
Max. fluid temperature Tmax 50 °C
Min. ambient temperature Tmin 5 °C
Max. ambient temperature Tmax 40 °C
Motor data (per motor)
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 1.1 kW
Rated current IN 2.5 A
Rated speed n 2900 1/min
Insulation class F
Protection class IP55
Motor efficiency 50% ηM 50% 78.7 %
Motor efficiency 75% ηM 75% 82 %
Motor efficiency 100% ηM 100% 82.7 %
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Mechanical seal Q1BE3GG
Gasket material EPDM
Pipework material Stainless steel
Product data
Brand Wilo
Product description Comfort CO-6 Helix V 605/K/CC
Article number 2535368
EAN number 4048482197425
Colour Green/black/silver
Minimum order quantity 1
Date of sales availability 2011-09-01
Packaging
Packaging type Transport beam
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1800 mm
Length L 1800 mm
Height with packaging 1875 mm
Height H 1670 mm
Width with packaging 1100 mm
Width W 798 mm
Gross weight, approx. m 340 kg
Net weight, approx. m 315 kg
Tender text

Compact pressure boosting system according to DIN 1988 and DIN EN 806, for direct or indirect connection. Consisting of non self-priming, switched in parallel, vertically-mounted stainless steel high-pressure multistage centrifugal pumps in glanded versions. Ready for connection with stainless steel pipework, mounted on a base frame, including control device with all necessary measurement and adjustment equipment.

For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems.

For pumping drinking water, process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Special features/product benefits

  • Heavy-duty system which satisfies all the requirements of DIN 1988 (EN 806)
  • WRAS/ KTW/ ACS approval of the pumps for all parts that come in contact with the fluid (EPDM version)
  • High-efficiency pump hydraulics of the Helix V series in connection with IE3 standard motor, including 0.75 kW and larger (optional for smaller motor power)
  • Bidirectional mechanical seals in the pumps for easy maintenance
  • Flexible lantern design permits direct access to the mechanical seal
  • The spacer coupling enables the mechanical seal to be replaced without dismantling the motor (from 7.5 kW)
  • Hydraulics of entire system are pressure-loss optimised
  • Parts that come in contact with the fluid are corrosion-resistant
  • Comfort CC control device, with extended functions, PLC microcomputer and graphics-capable touchscreen
  • Factory inspection and default setting at optimum operating range (incl. inspection certificate in accordance with EN 10204-3.1)

Equipment/function

  • Stainless steel high-pressure multistage centrifugal pumps of the Helix V series
  • Base frame made of electrolytically galvanised steel, with height-adjustable vibration absorbers for insulation against structure-borne noise
  • Shut-off device on the suction and pressure sides of each pump
  • Non-return valve on the pressure side of each pump
  • 8 litre diaphragm pressure vessel, PN 16 including throughflow fitting in accordance with DIN 4807, pressure side
  • Pressure sensor (4 – 20 mA), pressure side
  • Pressure gauge, pressure side
  • Automatic pump control by means of a fully electronic

Comfort-Controller (CC) in a sheet metal enclosure painted RAL 7035, protection class IP54 consisting of an internal control voltage supply unit, CPU, analogue and digital input and output modules.

Operation/display

  • High-resolution touch display with colour display for indicating the operating statuses operation/fault/acknowledged fault, and supporting symbols and plain text for menu navigation in eight languages
  • Menu navigation with plain text and symbol representation
  • Detailed on-screen instructions and assistance
  • Commissioning assistant
  • Data recording with CSV export
  • 3 user levels, display and selection of menu language, passwords, operating parameters, control parameters
  • Factory-preset parameters for easy commissioning/start-up
  • Three setpoints can be set as standard, setpoints 2 and 3 can be activated by contact or time, external setpoint specification by 0/4 – 20 mA signal
  • Display of pump status and actual pressure value
  • Lockable main switch
  • Operation selectable with / without standby pump
  • Elapsed time indicator for each pump
  • Elapsed time indicator for entire system
  • Switching cycle counter for each pump
  • Switching cycle counter for entire system
  • Fault log for the last 35 faults with timestamp using a real time clock

Control

  • Fully automatic control for 1 to 6 uncontrolled pumps by means of setpoint/actual value comparison
  • Daily timer, e.g. for setpoints 2 and 3
  • Automatic, load-sensitive cut-in of 1 to n peak-load pump(s) depending on the pressure - constant, p-c control variable
  • Operating mode of the pumps freely selectable (manual, off, automatic)
  • Manual-0-Automatic switch Preselection of the operating mode of each pump and manual operation in the event of a controller fault "Manual" (emergency/test mode available at mains power, motor protection available), "O" (pump switched off – cannot be switched on using the controller) and "Auto" (pump enabled for automatic mode via the controller)
  • Automatic, configurable pump cycling
  • Pump cycling by means of service life optimisation over operating hours
    • Alternative: Pump cycling after a set time period, regardless of the operating hours
    • Alternatively by impulse: The base-load pump is cycled at each new demand, regardless of operating hours
    • Alternatively with pump pre-selection: one pump can be permanently defined as the base-load pump. All peak-load pumps are cycled on a running time optimisation basis
  • Automatic, configurable pump test run (pump kick)
    • Can be activated/deactivated
    • Time between two test runs is freely programmable
  • Disabling times can be programmed as desired

Monitoring

  • Display of actual value of the system via a 0 – 10 Volt analogue signal for external measurement/display applications, 10 Volt correspond to the final sensor value
  • Conductivity test of the sensor cable
  • Motor protection switch / contactor combination (from 5.5 kW thermal motor protection relay)
  • Automatic switchover to the standby pump in the event of an operating pump fault
  • Monitoring of maximum and minimum system values with adjustable time delays and limits
  • Monitoring of maximum and minimum system values with adjustable prominent time display
  • Zero-flow test for switching off the system when no water is being drawn off (adjustable parameters)
  • Pipe filling function for filling empty pipes (initial filling of the consumer network)
  • Protection against low water level via contact e.g. for float switch or pressure switch

Interfaces

  • Potential-free contacts for SBM/SSM collective operation and collective fault signals
  • Logic reversal can be applied to SBM and SSM
  • Contacts for switching external systems ON/OFF and protection against low water level
  • External on/off via contact for deactivation of the system’s automatic mode
  • Inputs for thermal winding contact (WSK) connection
  • ModBus TCP
  • Remote access via VNC

Optional accessories (factory installation or retrofitting after technical checks)

  • Signal converter for 0/2 –10 V to 0/4 – 20 mA
  • Evaluation relay for PTC motor protection
  • Individual operation/fault message
  • DDC control module (external pump cycling, external pump test run, external acknowledgement, external switching of the peak-load pumps on/off)
  • Buffered power supply unit
  • Redundant sensor
  • Connection to BMS in accordance with VDI 3814

Recommended accessories (to be ordered separately)

  • Optional WMS low-water cut-out switchgear kit
  • Flexible connection pipes or compensators
  • Break tank for system separation
  • Diaphragm pressure vessel
  • Threaded caps for systems with threaded joint tubing

Bus systems (optional)

  • BACnet, ProfiBus, LON bus, CAN bus, Modbus RTU, Web server (Ethernet), GSM modem
  • Remote data transmission possible via GPRS modem

Further details on request

Standards followed

  • Codes of practice for drinking water installations (TRWI) DIN 1988 (EN806)
  • Diaphragm pressure vessel/ diaphragm expansion tank DIN 4807
  • Electronic equipment for use in power installations EN 50178
  • Electrical equipment of machines EN 60204-1
  • Safety of household and similar electrical appliances EN 60335-1
  • Low-voltage switchgear and controlgear assemblies EN 60439-1/61439-1
  • EMC immunity for industrial environments EN 61000-6-2
  • EMC – Emission standard for residential, commercial and light-industrial environments (EN 61000-6-3)
Operating Data
Number of pumps 6
Fluid temperature T 3 °C
Ambient temperature T 5 °C
Maximum operating pressure PN 16 bar
Maximum inlet pressure p inl 10 bar
Motor data (per motor)
Mains connection 3~400 V, 50 Hz
Rated power P2 1.1 kW
Rated current IN 2.5 A
Rated speed n 2900 1/min
Insulation class F
Protection class motor IP55
Protection class switchgear IP54
Materials
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Shaft seal Q1BE3GG
Gasket material EPDM
Pipework material Stainless steel
Installation dimensions
Pipe connection on the suction side DNs R 3
Pipe connection on the discharge side DNd R 3
Ordering information
Brand Wilo
Product description Comfort CO-6 Helix V 605/K/CC
Net weight, approx. m 315 kg
Article number 2535368
Documents

Installation and operating instructions

Wilo-Helix V, .. FIRST V, ..2.0-VE 2-4-6-10-16

Article Number 4143727
Edition 2023-03
Number of pages 24
PDF (5 MB)

Wilo-Economy, Wilo-Comfort, -Comfort-N, Wilo-Vario

Article Number 2063145
Edition 1007
Number of pages 1
ZIP (45 MB)

Wilo-Control CC-Booster (CC, CC-FC, CCe)

Article Number 2552577
Edition 2020-12
Number of pages 26
PDF (2 MB)

Wilo-Comfort CO(R) .. MVI .../ .. MVIS .../ .. Helix V .../.. Helix VE ...

Article Number 2535456
Edition 2021-09
Number of pages 40
PDF (6 MB)

Wilo-Helix V/ FIRST V 22-36-52

Article Number 4120943
Edition 1603
Number of pages 1
ZIP (111 MB)

Wilo-Helix V, FIRST V, 2.0-VE 22-36-52

Article Number 4120943
Edition 02/2022
Number of pages 28
PDF (7 MB)

Certificate REACH

Group Statement REACH

Edition 2021-05
Number of pages 4
PDF (262 KB)

Certificate

Battery Test Summary UN38.3 CR2450

Number of pages 1
PDF (111 KB)
BIM/CAD

3D_DWG

CO-6Helix V605/K/CC-01

DWG (8 MB)

3D_STEP

CO-6HELIX V605/K/CC-01

STP (13 MB)

2D_DWG_TOP

CO-6HELIX V605/K/CC-01

DWG (141 KB)

2D_DWG_FRONT

CO-6HELIX V605/K/CC-01

DWG (112 KB)

2D_DWG_RIGHT

CO-6HELIX V605/K/CC-01

DWG (43 KB)
Accessory

Direct connection multipumps unregulated (36)

indirect connection multipumps unregulated (36)

On-site tank (4)

Break tank/accessories (7)

Fittings (3)

Pipe installation (5)

Pressure control (6)

Pressurised expansion tanks (29)

Pump control/accessories (16)

Level control (6)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Maintenance
Maintenance BASIC Booster Set 5-6 pumps
    
2219536

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance COMFORT Booster Set 5-6 pumps
    
2219498

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours)

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance PREMIUM Booster Set 5-6 pumps
    
2219551

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Checking the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours)
  • Software updates
  • Includes wearing parts

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Commissioning
Commissioning Booster Set 5-6 pumps
    
2219396

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

More suitable services

Supervision
Supervision Booster Set 5-6 pumps
    
2219330

Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project.

Supervision includes:

  • Regular on-site visits ensure the quality of information and advice
  • Technical consultancy, also available on site
  • Status report with recommendations after the visit
  • Comprehensive support from a Wilo expert
Repair
Repair Booster Set 5-6 pumps
    
2219619

Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system.

Repair includes:

  • Verification and elimination of error causes by experienced Wilo experts
  • Non-binding estimate for repairs
  • Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system
  • Coating of various pump or system components for an optimised efficiency factor
  • Use of genuine spare parts only
  • Documentation of the repair in the service report