Port 600.1-2250-03B | Wilo
Similar to figure

Port 600.1-2250-03B

Technical data
Tender text

Ready for assembly plastic sump made of corrosion-resistant polyethylene in monolithic construction without sealing surfaces, optionally with telescopic extension. Certification according to EN 12050-1 with deposit-free pump chamber geometry and lifting brackets for easy removal and transportation. Anti-buoyant for ground water levels up to surface of ground without additional concrete weights provided by the customer. Removable non-return ball valve in rectangular design directly on the discharge ports of the pump for reliable seal, as there is always a supply pressure. Surface coupling with facility for an optional flush connection and vacuum relief valve. Surface coupling for quick and easy pump assembly and a facility for an optional flush connection and vacuum relief valve. Bushing gate valve with optional operating extension. Incl. chain as pump lifting device. Pump chamber cover in accordance with EN 124 in categories A 15 and B 125 can be installed directly onto the pump chamber without a weight distribution plate, optional class D 400 (with customer-supplied weight distribution plate) available.

Approved field of application
For Wilo pumps Rexa CUT, Drain MTC 32F39, Drain MTC 40
Max. permissible pressure in the pressure pipe P 10 bar
Min. fluid temperature 0 °C
Max. fluid temperature 40 °C
Min. ambient temperature 3 °C
Max. ambient temperature 20 °C
Technical data
Break tank volume V 560 l
Connection output R 1¼
Venting DN 100
Material, tank PE
Length L 880 mm
Width W 880 mm
Height H 2250 mm
Net weight, approx. 61 kg
Ordering information
Make Wilo
Item no. 2543047

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)