- Reduced life-cycle costs through optimised efficiency levels
- Pump housing in plastic design
- Version with Victaulic or threaded connection (BAC 70/135... with Victaulic connection only)
Glanded pump in block design with screwed connection or Victaulic connection.
For pumping of cooling water, cold water, water-glycol mixtures and other fluids without abrasive substances.
Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port
Scope of delivery
- Installation and operating instructions
Monobloc pump for cooling and air-conditioning applications
Pipe connection (pressure port)
Rated motor power P2 in kW
Number of poles
- Permissible temperature range -15 °C to +60 °C
- Mains connection 3~400 V, 50 Hz (others on request)
- Protection class IP 54
- Screwed connection: G2/G 1½ (type S) or Victaulic connection 60.3/48.3 mm (type BAC 40…-R) or 76.1/76.1 mm (type BAC 70…-R)
- Max. operating pressure 6.5 bar
- Pump housing: PA 6.6 50% GF
- Impeller: PA/PPO, fibreglass-reinforced
- Shaft: X30Cr13
- Mechanical seal: BQEGG
Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port.
|Product description||Mains connection||Rated power P2||Rated speed n||Nominal flange diameter||Gross weight, approx. m||Article number|