EMUport CORE 60.2-16/540 | Wilo
Similar to figure

EMUport CORE 60.2-16/540

Technical data
Tender text

Fully submersible sewage lifting unit ready for connection with solids separation system in accordance with DIN EN 12050-1. With the solids separation system version, coarse solids are separated before the pumps and do not come into contact with them, thereby maximizing operational reliability. All-in-one gas-tight and watertight collection reservoir without constructive welded joints, as well as two separately-lockable and externally maintainable solids separation reservoirs. Individual shut-off makes it possible to carry out maintenance work during operation. Pumping is performed by two high-performance submersible sewage pumps in dry well installation that run in alternating operation. The dry well installation of the pumps and their configuration as a redundant double-pump system ensures maximum hygiene, ease of maintenance, and operational reliability. The collection reservoir has rounded edges, the tank bottom is bevelled, the deepest point is located directly below the pump. This prevents deposits and the drying of solids at critical points. Quick connector to the pumps and the inspection opening facilitate maintenance work. Separate blocking of the solids separation reservoir facilitate maintenance while the unit is in operation. Manual backwashing in the collection reservoir reinforces the cleaning effect through additional turbulences and the transparent cover on the distributor box allows easy visual inspection of the unit. Level control is carried out using a level probe.

Scope of delivery

  • Submersible pump solids separation system with two dry well installation submersible pumps
  • 2x gate valve for solids separation reservoir
  • 2x non-return valve on the pressure side in rectangular design
  • 2x gate valve on the pressure side
  • Consolidation of the pressure outlet line
  • 1x level probe
  • 1x floor fixation as cross beam
  • 2.5 m aeration and venting hose
  • 1x maintenance set with blind flange

Recommended accessories

  • Wilo-Control SC-L-…-FTS switchgear
  • Inlet slide valve
Approved field of application
Fluid temperature T 3 °C
Ambient temperature T 3 °C
Maximum operating pressure PN 2 bar
Max. permissible pressure in the pressure pipe P 6 bar
Product data
Gross volume of the tank V 1200 l
Switching volume V 900 l
Operating mode (non-immersed) S1
Height H 1960 mm
Length L 1830 mm
Width W 1760 mm
Diagonal dimension Diagonal axis 2000 mm
Motor data
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 4 kW
Rated speed n 1450 1/min
Rated current IN 9.5 A
Insulation class H
Protection class motor IP68
Activation type Direct (D)
Max. switching frequency t 15 1/h
Motor protection Bimetallic
Cable
Type of connection cable Non-detachable
Materials
Tank PE
Pump housing Cast iron
Impeller Cast iron
Shaft Stainless steel
Gasket material FKM
Motor housing Cast iron
Installation dimensions
Pipe connection on the suction side DN 200
Pipe connection on the discharge side DN 100
Connection venting Ø 75
Ordering information
Brand Wilo
Product description EMUport CORE 60.2-16/540
Net weight, approx. m 602 kg
Article number 2554548
Downloads

Installation and operating instructions

Wilo-EMUport CORE

Article Number 2546468
Edition 2017-03
Page format 209.9 x 297.0 mm
Number of pages 100
PDF (21 MB)

Certification booklet

Wilo-EMUport Core 20.2 / 45.2 / 50.2 / 60.2

Article Number 2546469
Edition 2021-07
Page format 209.9 x 297.0 mm
Number of pages 40
PDF (3 MB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)
BIM/CAD