Search
Contact
E-mail
Catalogue creation
My favorites
Multivert MVIE 7001 (3~380/400/460 V, EPDM, ) | Wilo
Similar to figure

Multivert MVIE 7001 (3~380/400/460 V, EPDM, )

Article number: 4122317
Technical data
Tender text

Non-self-priming vertical high-pressure multistage centrifugal pump in in-line design with integrated air-cooled frequency converter. The integrated frequency converter enables variable speed, pressure and PID control.

Control modes

  • “Speed control”: Manually via Green Button or an external signal
  • Constant or variable pressure: Pressure control via sensor, setpoint configuration via Green Button or external signal
  • PID control: other constant control variables (temperature, volume flow, pressure…) with sensor, setpoint adjustment with Green Button, by means of external signals

The electronic module offers various protective functions including overload protection, low-water recognition as well as safeguards for mains under or overvoltage, high ambient temperature, phase failure, blocked pumps and short-circuits. Error messages are output to the display.

Input:

  • In1: Input, sensor signal 4 – 20 mA, 0 – 10 V, 0 – 20 mA or 2 – 10 V
  • In2: Input, setpoint 0 – 20 mA, 0 – 10 V, 4 – 20 mA or 2 – 10 V

Output:

  • Voltage output +24 V with max. contact strength of 60 mA
  • Potential-free collective run and fault signals
  • External On/Off mode. Infrared communication
  • Slot for Wilo-IF modules Modbus, BACnet, CAN, PLR, LON for connection to the building automation

The pump and motor shafts are connected via clamp coupling. A special lantern ball bearing ensures optimum admission of axial thrusts.

The pump is suitable for water supply and boosting, industrial circulation systems, process water and cooling water circulation systems, fire-fighting systems, washing systems and irrigation. It can also be used in washing systems as well as for irrigation.

Special features/Product advantages

  • Corrosion-resistant impellers and guide vanes and stage housings

Scope of delivery

  • Wilo-Multivert MVIE high-pressure multistage centrifugal pump
  • Installation and operating instructions

Notes on the design

  • Round counter flanges are available as accessories
  • Optional plug-in IF module
  • Sensors are available as accessories.
  • Bypass sets are available as accessories.
Product data
Min. fluid temperature Tmin -15 °C
Max. fluid temperature Tmax 120 °C
Max. ambient temperature Tmax 50 °C
Maximum operating pressure PN 16 bar
Maximum inlet pressure p inl 10 bar
Minimum efficiency index (MEI) 0.4
Motor data
Electromagnetic compatibility EN 61000-6-1, -2, -3, -4
Mains connection
  • 3~380 V, 50/60 Hz
  • 3~400 V, 50/60 Hz
  • 3~440 V, 50/60 Hz
  • 3~460 V, 50/60 Hz
  • 3~480 V, 50/60 Hz
Voltage tolerance 400/50:+/-10%, 380/60:+/-10%, 440/60:+/-6%
Rated power P2 5.5 kW
Motor efficiency class IE4
Rated current IN 5.6 A
Min. speed nmin 1000 1/min
Max. speed nmax 2905 1/min
Insulation class F
Protection class IP55
Materials
Pump housing Grey cast iron
Impeller Stainless steel
Shaft Stainless steel
Shaft seal U3BE3GG
Gasket material EPDM
Installation dimensions
Pipe connection on the suction side DNs DN 100
Pipe connection on the discharge side DNd DN 100
Ordering information
Brand Wilo
Product description Multivert MVIE 7001 (3~380/400/460 V, EPDM, )
Net weight, approx. m 133.9 kg
Article number 4122317
Documents

Installation and operating instructions

Wilo-MVIE 5,5-7,5 kW / Wilo-Helix VE 5,5-7,5 kW

Article Number 4122430
Edition 0906
Page format A4
Number of pages 1
ZIP (10 MB)

Wilo-MVIE 5,5-7,5 kW / Wilo-Helix VE 5,5-7,5 kW

Article Number 4122430
Edition 0906
Page format A4
Number of pages 36
PDF (2 MB)

Certificate REACH

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)
BIM/CAD

3D_DWG

MVIE7001-3/16/E/3-2-2G

DWG (923 KB)

3D_STEP

MVIE7001-3/16/E/3-2-2G

STP (1 MB)

2D_DWG_TOP

MVIE7001-3/16/E/3-2-2G

DWG (18 KB)

2D_DWG_FRONT

MVIE7001-3/16/E/3-2-2G

DWG (26 KB)

2D_DWG_RIGHT

MVIE7001-3/16/E/3-2-2G

DWG (20 KB)
Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Maintenance
Maintenance BASIC pressure-boosting system 1-2 pumps
    
2160453

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance COMFORT Booster Set 1-2 pumps
    
2160468

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours)

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance PREMIUM pressure-boosting system 1-2 pumps
    
2160483

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Checking the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours)
  • Software updates
  • Includes wearing parts

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Commissioning
Commissioning Booster Set 1-2 pumps
    
2216414

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

More suitable services

Wilo-Live Assistant
Wilo-Live Assistant Service
    
2216415

The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems!

The Wilo-Live Assistant includes:

  • Interactive live support via video chat
  • Direct contact with an expert
  • Just-in-time solution to ensure maximum operational reliability of your pumps and systems
Supervision
Supervision Booster Set 1-2 pumps
    
2216412

Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project.

Supervision includes:

  • Regular on-site visits ensure the quality of information and advice
  • Technical consultancy, also available on site
  • Status report with recommendations after the visit
  • Comprehensive support from a Wilo expert
Repair
Repair Booster Set 1-2 pumps
    
2216417

Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system.

Repair includes:

  • Verification and elimination of error causes by experienced Wilo experts
  • Non-binding estimate for repairs
  • Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system
  • Coating of various pump or system components for an optimised efficiency factor
  • Use of genuine spare parts only
  • Documentation of the repair in the service report