Rexa PRO V05DA-328/EAD0X2-T0105-540-O
| Hydraulic data | |
|---|---|
| Maximum operating pressure p | 5.8 bar |
| Discharge port | DN 50 |
| Free ball passage of the hydraulics | 50 mm |
| Impeller type | Vortex impeller |
| Max. immersion depth | 20 m |
| Max. delivery head Hmax | 52.4 m |
| Max. volume flow Qmax | 61.2 m³/h |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Motor Identifier | P 17.1-22/EAD0X2-T Ex 10,5kW |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 10.5 kW |
| Power consumption P1 max | 12.30 kW |
| Rated current IN | 20.5 A |
| Starting current I | 57 A |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | - |
| Rated speed n | 2914 1/min |
| Power factor cos φ100 | 0.87 |
| Activation type | Star-Delta (YΔ) |
| Number of poles | 2 |
| Max. switching frequency t | 15 1/h |
| Insulation class | H |
| Protection class motor | IP68 |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 10G1,5 mm² |
| Type of connection cable | Non-detachable |
| Equipment/function | |
|---|---|
| Mains plug | no |
| Float switch | no |
| Macerator | no |
| Explosion protection type | ATEX |
| Motor protection | Bimetall |
| Motor, leakage detection | yes |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | Silicon carbide |
| Sealing on motor side | NBR |
| Gasket material | NBR |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Inlet connection | DN 50 |
| Outlet connection | DN 50 |
Wilo-Rexa PRO V05-32.. - portable wet well installation
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Rexa PRO V05DA-328/EAD0X2-T0105-540-O |
| Article number | 6082579 |
| EAN number | 4048482783123 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2017-09-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 800 mm |
| Length L | 326 mm |
| Height with packaging | 830 mm |
| Height H | 669 mm |
| Width with packaging | 600 mm |
| Width W | 274 mm |
| Gross weight, approx. m | 119.7 kg |
| Net weight, approx. m | 117.7 kg |
Fully submersible sewage pump for stationary and transportable wet well installation for pumping wastewater, sewage containing faeces (within the scope of validity of (DIN) EN 12050-1) and untreated sewage. Unit made completely of cast iron. The sealing on the fluid and on the motor side is performed by two bidirectional mechanical seals. Surface-cooled motor in three-phase current version with sealing chamber, thermal motor monitoring and Ex rating. Connection cable with longitudinally watertight cable inlet and bare cable end.
| Operating Data |
|---|
| Product data | |
|---|---|
| Impeller type | Vortex impeller |
| Free ball passage of the hydraulics | 50 mm |
| Maximum operating pressure PN | 6 bar |
| Max. immersion depth | 20 m |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Motor design | Submersible motor – surface-cooled |
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Power factor cos φ100 | 0.87 |
| Rated power P2 | 10.5 kW |
| Power consumption P1 max | 12.30 kW |
| Rated current IN | 20.5 A |
| Starting current I | 57 A |
| Activation type | Star-Delta (YΔ) |
| Number of poles | 2 |
| Rated speed n | 2914 1/min |
| Max. switching frequency t | 15 1/h |
| Insulation class | H |
| Protection class | IP68 |
| Operating mode (immersed) | S1 |
| Operating mode (non-immersed) | - |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 10G1,5 mm² |
| Mains plug | no |
| Type of connection cable | Non-detachable |
| Equipment/function | |
|---|---|
| Float switch | no |
| Macerator | no |
| Explosion protection type | ATEX |
| Motor protection | Bimetall |
| Motor, leakage detection | yes |
| Sealing chamber, leakage detection | optional |
| Leakage chamber, leakage detection | no |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Sealing on pump side | QQPGG |
| Sealing on motor side | BXPFF |
| Gasket material | NBR |
| Motor housing | Grey cast iron |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | DN 50 |
| Pipe connection on the discharge side DNd | DN 50 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Rexa PRO V05DA-328/EAD0X2-T0105-540-O |
| Net weight, approx. m | 117.7 kg |
| Article number | 6082579 |
Installation and operating instructions
Wilo-Rexa PRO
| Article Number | 6063548 |
| Edition | 2019-02 |
| Number of pages | 48 |
PDF (3 MB)Certification booklet
Wilo-Rexa PRO
| Article Number | 6069824 |
| Edition | 2022-11 |
| Number of pages | 32 |
PDF (14 MB)Wilo-RexaNorm RE, Wilo-Rexa NORM, Wilo-RexaNorm RE (Bare shaft), Wilo-Rexa NORM (Bare shaft)
| Article Number | 6074550 |
| Edition | 2022-11 |
| Number of pages | 40 |
PDF (13 MB)Level control with float switch (11) | |||
Additional module for equipping the switchgear series Wilo-SC/SCe-HVAC, SC/SCe-Booster and SC-L for dialling into and communicating in GSM mobile phone networks. The GSM module represents an extension of the SC/SCe system for the transfer of status and fault signals of a SC/SCe system via SMS (Short Message Service). Up to 2 recipients can be set up and prioritised who are to receive a fault signal via SMS in the event of a system failure. The settings with respect to the SMS functions can be made directly on the display of the SC/SCe system. Version: Insulant housing for installation in a switch cabinet, fixation by means of the supplied accessories kit (adapter plate). A SIM card and an antenna are required for the operation of the modem which are not included in the scope of delivery. Antennas with various cable lengths of 2.5 m, 10 m, 15 m are available as additional accessories. SIM cards are available from various mobile telephone providers. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the communication module is possible. The installation must be performed by customer service, as a software update of the SC/SCe system is also required. Scope of delivery
| |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex-rated cut-off relay (3-circuit) | 2510698 | ||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex-rated cut-off relay (4-circuit) | 2510699 | ||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Level control with level sensor (12) | |||
Additional module for equipping the switchgear series Wilo-SC/SCe-HVAC, SC/SCe-Booster and SC-L for dialling into and communicating in GSM mobile phone networks. The GSM module represents an extension of the SC/SCe system for the transfer of status and fault signals of a SC/SCe system via SMS (Short Message Service). Up to 2 recipients can be set up and prioritised who are to receive a fault signal via SMS in the event of a system failure. The settings with respect to the SMS functions can be made directly on the display of the SC/SCe system. Version: Insulant housing for installation in a switch cabinet, fixation by means of the supplied accessories kit (adapter plate). A SIM card and an antenna are required for the operation of the modem which are not included in the scope of delivery. Antennas with various cable lengths of 2.5 m, 10 m, 15 m are available as additional accessories. SIM cards are available from various mobile telephone providers. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the communication module is possible. The installation must be performed by customer service, as a software update of the SC/SCe system is also required. Scope of delivery
| |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
External pencil electrode in stainless steel housing with cable for monitoring leakage in the sealing chamber. Rod length must be adjusted to the respective installation situation on site. | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWS with 30 m cable | 6088841 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWS with 50 m cable | 6088840 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWS with 10 m cable | 6088839 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWS with 30 m cable | 6088837 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Breakdown barrier (Zener barrier) for the galvanically isolated connection of one level sensor in an explosive atmosphere. Suitable for wall fixation. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Level control with dynamic pressure system (7) | |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
Dynamic pressure bell for recording the hydrostatic pressure for fluids that contain faeces. The pressure transducer measures the level in the pump chamber through changes in pressure in the fluid. These pressure changes are forwarded to the switchgear through a sealed hose and evaluated by measuring elements. Because the dynamic pressure bell is open in the direction of the fluid (open dynamic pressure system), the dynamic pressure bell must be aerated after each drainage pumping sequence. Accordingly, the switchgear must have an adjustable run-on time (OFF according to time). If aeration of the dynamic pressure bell is not ensured, then the dynamic pressure bell must be aerated either continuously or periodically (OFF according to level) using a compressor (bubbling-through system, can be ordered as an option). Use in potentially explosive areas permitted. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Mains-independent alarm signal (6) | |||
Breakdown barrier (Zener barrier) for the galvanically isolated connection of one level sensor in an explosive atmosphere. Suitable for wall fixation. | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Pump chamber WS 1100 (9) | |||
Pump chamber extension, incl. seal, mounting accessories and stay bar extension for level transmitter. Installation note: Only one extension can be installed per pump chamber! | |||
Pump chamber cover (can be walked on), flood proof due to integrated gaskets, with slip-resistant profile on the cover top, with exterior locking. | |||
Pump chamber cover (can be walked on) with slip-resistant profile on the cover top, with interior locking. | |||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G1½"/63 mm | 2505045 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Plastic chamber as a twin-head pump system for ground installation. For collecting and pumping of sewage containing faeces:
Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to:
Scope of delivery
Pump, switchgear and level measurement must be ordered as accessories! | |||
Plastic chamber as a single-pump system for ground installation. For collecting and pumping of sewage containing faeces:
Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to:
Scope of delivery
Pump, switchgear and level measurement must be ordered as accessories! | |||
Stationary wet well installation DN 50 (18) | |||
90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories. | |||
Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits. | |||
Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery:
The two guide pipes (26.9x2 mm) are to be provided by the customer! | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 400 kg, 3 m | 6063139 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 3 m | 6063135 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Installation kit for a flange/flange connection consisting of
| |||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a case iron pipe, including mounting accessories. | |||
Bracket for guide pipe extension DN 50 for ST pipe | 6066846 | ||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories. | |||
Guide pipe bracket DN 50 for GG pipe | 6066851 | ||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories. | |||
Guide pipe bracket for 2 pipe guides, for pipe attachment on a steel pipe, including mounting accessories. As an alternative to pump chamber fixation. | |||
Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit:
| |||
Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit:
| |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories.
| |||
Portable wet well installation DN 50 (13) | |||
90° pipe elbow for mounting to the pump pressure connection for a direct hose connection with hose nozzle, incl. 1 set mounting accessories and hose nozzle. Connections:
| |||
Pump support foot for assembling on the suction port for portable wet well installation, incl. mounting accessories. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 60 mm | 2027644 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 20 m, with Storz C | 6003649 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Pressure connection set consisting of Storz fixed coupling, 90° pipe elbow and flanged connection. Including 1 set mounting accessories. | |||
Fittings (6) | |||
Non-return valve in accordance with EN 12050-4 for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges. Including mounting accessories.
| |||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 100, EN-GJL-250 | 2017163 | ||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 150, EN-GJL-250 | 2017164 | ||
Gate valve with plate element and flange connections for shutting off the pipe network. Including mounting accessories. | |||
Gate valve DN 100, PVC | 2529808 | ||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network. | |||
Hoses / hose joints (31) | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 20 m, Ø 90 mm | 2017193 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 30 m, Ø 90 mm | 2017194 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 10 m, Ø 110 mm | 2017196 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 20 m, Ø 110 mm | 2017197 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 30 m, Ø 110 mm | 2017198 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 10 m, Ø 60 mm | 2018106 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 42 mm | 2027641 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 5 m, Ø 42 mm | 2027642 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 15 m, Ø 42 mm | 2027643 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 60 mm | 2027644 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Storz fixed coupling with male thread for installation on the pressure connection | |||
Fixed coupling Storz A/G 4 | 2016161 | ||
Storz fixed coupling with female thread for installation at the discharge port | |||
Fixed coupling Storz 90 mm/G 3 | 2017203 | ||
Storz fixed coupling with female thread for installation at the discharge port | |||
Fixed coupling Storz C/G 2 | 2018102 | ||
Storz fixed coupling with male thread for installation on the pressure connection | |||
Fixed coupling Storz 90 mm/G 2½ | 6003069 | ||
Storz fixed coupling with male thread for installation on the pressure connection | |||
Fixed coupling Storz C/G 1½ | 6072745 | ||
Storz fixed coupling with male thread for installation on the pressure connection | |||
Storz fixed coupling with male thread for installation on the pressure connection | |||
Pressure connection set consisting of Storz fixed coupling, 90° pipe elbow and flanged connection. Including 1 set mounting accessories. | |||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 10 m, with Storz B | 6003051 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 5 m, with Storz B | 6003052 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 20 m, with Storz F | 6003647 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 10 m, with Storz F | 6003648 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 20 m, with Storz C | 6003649 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 10 m, with Storz C | 6003650 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 5 m, with Storz C | 6003651 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 5 m, with Storz A | 6022391 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Synthetic fibre pressure hose 10 m, with Storz A | 6022392 | ||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Pressure hose in synthetic fibre version (fire hose; exterior synthetic fibre, interior rubber coated) with built-in Storz coupling for connection on the discharge port with corresponding Storz fixed coupling. | |||
Installation/setup (44) | |||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G1½"/63 mm | 2505045 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G2"/63 mm | 2505046 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G2"/75 mm | 2525181 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection 50mm/50 mm | 2525183 | ||
Clamp bolting for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection 50mm/63 mm | 2525184 | ||
Clamp bolting for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G1¼"/40 mm | 2543025 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp connection G1¼"/50 mm | 2543026 | ||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Clamp bolting with female thread for connection to a PE discharge pipe outside the pump chamber. | |||
Guide pipe bracket for 2 pipe guides, for pipe attachment on a steel pipe, including mounting accessories. As an alternative to pump chamber fixation. | |||
Bracket for guide pipe extension DN 50 for ST pipe | 6066846 | ||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories. | |||
Guide pipe bracket DN 50 for GG pipe | 6066851 | ||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a steel pipe, including mounting accessories. | |||
Guide pipe bracket for 2 guide pipes for extension of the guide pipes for installation depths of over 6 m. For pipe attachment to a case iron pipe, including mounting accessories. | |||
Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit:
| |||
Guide pipe suitable for use with the suspension unit. Safely routes the pump to the coupling connection. Required quantity depends on suspension unit:
| |||
Installation kit for a flange/flange connection consisting of
| |||
Pump chamber cover (can be walked on) with slip-resistant profile on the cover top, with interior locking. | |||
Pump chamber cover (can be walked on), flood proof due to integrated gaskets, with slip-resistant profile on the cover top, with exterior locking. | |||
Pump support foot for assembling on the suction port for portable wet well installation, incl. mounting accessories. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 400 kg, 5 m | 6063140 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 400 kg, 6 m | 6063141 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 400 kg, 10 m | 6063142 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 800 kg, 3 m | 6063147 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 800 kg, 5 m | 6063148 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 800 kg, 6 m | 6063149 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 800 kg, 10 m | 6063150 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 2000 kg, 10 m | 6063152 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 5000 kg, 10 m | 6063154 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, galvanised steel, 7000 kg, 10 m | 6063156 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 5 m | 6063136 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 6 m | 6063137 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 400 kg, 10 m | 6063138 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 3 m | 6063143 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles without connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 5 m | 6063144 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 6 m | 6063145 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 800 kg, 10 m | 6063146 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 2000 kg, 10 m | 6063151 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain kit PCS-CE, stainless steel, 5000 kg, 10 m | 6063153 | ||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Sling chain for raising, lowering and transporting pumps and lifting units, incl. 2 shackles with connecting links for suspension. | |||
Pump chamber extension, incl. seal, mounting accessories and stay bar extension for level transmitter. Installation note: Only one extension can be installed per pump chamber! | |||
Suspension unit for mounting in the pump chamber for easy installation of the sewage pump to the discharge pipe. scope of delivery:
The two guide pipes (26.9x2 mm) are to be provided by the customer! | |||
Pipes/pipe joints (4) | |||
90° pipe elbow, with flange connection on both sides, for installation in the discharge pipe, incl. 1 set of mounting accessories. | |||
90° pipe elbow for mounting to the pump pressure connection for a direct hose connection with hose nozzle, incl. 1 set mounting accessories and hose nozzle. Connections:
| |||
Threaded flange with neck and cylindrical female thread for the adapter to a flange connection. Suitable for screwing in threaded pipes with cone-shaped male thread. Including 1 set mounting accessories. | |||
Y-piece to combine two discharge lines into a common discharge line for double-pump systems; includes two installation accessory kits. | |||
Pump chamber (2) | |||
Plastic chamber as a single-pump system for ground installation. For collecting and pumping of sewage containing faeces:
Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to:
Scope of delivery
Pump, switchgear and level measurement must be ordered as accessories! | |||
Plastic chamber as a twin-head pump system for ground installation. For collecting and pumping of sewage containing faeces:
Pump chamber with four inlets for flexible connection and four integrated fins for increased anti-buoyancy. The chamber base is hemispherically-shaped to minimise deposits on the chamber base and maximise dimensional stability. Two lifting eyes are integrated for attaching the lifting accessory. The chamber cover can withstand a maximum traffic load of 5 kN/m². Sewage pumping according to (DIN) EN 12050 Depending on the pumps used, the chamber meets the requirements according to:
Scope of delivery
Pump, switchgear and level measurement must be ordered as accessories! | |||
Pump control (1) | |||
A stand-alone frequency converter for fixed-speed pumps that are operated in variable applications, especially for heating, air conditioning and pressure boosting. Special features/product advantages
Options
Scope of delivery
| |||
Pump control/accessories (7) | |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
Additional module for equipping the switchgear series Wilo-SC/SCe-HVAC, SC/SCe-Booster and SC-L for dialling into and communicating in GSM mobile phone networks. The GSM module represents an extension of the SC/SCe system for the transfer of status and fault signals of a SC/SCe system via SMS (Short Message Service). Up to 2 recipients can be set up and prioritised who are to receive a fault signal via SMS in the event of a system failure. The settings with respect to the SMS functions can be made directly on the display of the SC/SCe system. Version: Insulant housing for installation in a switch cabinet, fixation by means of the supplied accessories kit (adapter plate). A SIM card and an antenna are required for the operation of the modem which are not included in the scope of delivery. Antennas with various cable lengths of 2.5 m, 10 m, 15 m are available as additional accessories. SIM cards are available from various mobile telephone providers. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the communication module is possible. The installation must be performed by customer service, as a software update of the SC/SCe system is also required. Scope of delivery
| |||
The SC-OPTION LON communications module represents an extension to the integration of an SC/SCe system as a participant in the already existing LON building management system. Certain parameters can be written and read via LON, e.g. switchgear data, status and mode of the pumps, current actual value, setpoints, current speed of the pumps, recorded temperatures, operating hours, switching cycles, etc. The module is installed in the switchgear by the manufacturer when the order for the system is received. Retroactive installation of the LON module in the switchgear is possible. Installation by Wilo Customer Service is recommended. Scope of delivery
| |||
Evaluation relay for the connection of electrodes or float switches for level control. Suitable for installation in switch cabinets with 35 mm DIN rail. | |||
Evaluation relay for the connection of one pencil electrode for sealing chamber control. Additional connection for winding temperature monitoring. Suitable for installation in switch cabinets with 35 mm DIN rail! | |||
Relay for monitoring the power supply for phase failure, phase asymmetry and undervoltage Suitable for installation in switch cabinets with 35 mm top-hat rail! | |||
For connecting Wilo-Smart-SC/SCe-HVAC systems, Wilo-Smart-SC/SCe-Booster and Wilo-SiBoost Smart with BACnet-MSTP networks. The SC-OPTION BACnet MSTP communications module represents a software extension for the integration of an SC/SCe system as a slave in the already existing BACnet building management system. The connection of the BACnet MS/TP module to the RS485 bus proceeds via Twisted-Pair cabling/wiring. BACnet (Building Automation and Control Networks) ensures interoperability between devices from different manufacturers. Certain parameters can be written and read via BACnet MSTP, e.g. switchgear data, status and mode of the pumps, current actual value, setpoints, current speed of the pumps, recorded temperatures, operating hours, switching cycles, etc. The module is installed in the switchgear by the manufacturer when the order for the system is received. A retroactive activation of the "BACnet MSTP" function in the switchgear is possible. Execution by Wilo Customer Service is recommended. Scope of delivery
| |||
Alarm signal (7) | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Flash light 24 VDC | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Cable (2) | |||
External pencil electrode in stainless steel housing with cable for monitoring leakage in the sealing chamber. Rod length must be adjusted to the respective installation situation on site. | |||
External pencil electrode in stainless steel housing with cable for monitoring leakage in the sealing chamber. Rod length must be adjusted to the respective installation situation on site. | |||
Cable distribution (5) | |||
Two-piece cable distribution cabinet for outdoor installation made of fibreglass-reinforced plastic (SMC), consisting of:
The housing and pedestal can be installed without tools. Version
Electrical parameters
| |||
UCHRSD cable distribution cabinet, size 0 | 2523673 | ||
Two-piece cable distribution cabinet for outdoor installation made of fibreglass-reinforced plastic (SMC), consisting of:
The housing and pedestal can be installed without tools. Version
Electrical parameters
| |||
UCHRSD cable distribution cabinet, size 1 | 2523674 | ||
Two-piece cable distribution cabinet for outdoor installation made of fibreglass-reinforced plastic (SMC), consisting of:
The housing and pedestal can be installed without tools. Version
Electrical parameters
| |||
UCHRSD cable distribution cabinet, size 2 | 2523675 | ||
Two-piece cable distribution cabinet for outdoor installation made of fibreglass-reinforced plastic (SMC), consisting of:
The housing and pedestal can be installed without tools. Version
Electrical parameters
| |||
One-piece cable distribution cabinet for outdoor installation made of fibreglass-reinforced plastic (SMC), consisting of:
Version
Electrical parameters
| |||
Level control (23) | |||
Dynamic pressure bell for recording the hydrostatic pressure for fluids that contain faeces. The pressure transducer measures the level in the pump chamber through changes in pressure in the fluid. These pressure changes are forwarded to the switchgear through a sealed hose and evaluated by measuring elements. Because the dynamic pressure bell is open in the direction of the fluid (open dynamic pressure system), the dynamic pressure bell must be aerated after each drainage pumping sequence. Accordingly, the switchgear must have an adjustable run-on time (OFF according to time). If aeration of the dynamic pressure bell is not ensured, then the dynamic pressure bell must be aerated either continuously or periodically (OFF according to level) using a compressor (bubbling-through system, can be ordered as an option). Use in potentially explosive areas permitted. | |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Float switch WAO 65, 10 m cable | 2006027 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Float switch WAO 65, 20 m cable | 2004429 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-10 mWS with 30 m cable | 6088832 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-10 mWS with 20 m cable | 6088833 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWS with 50 m cable | 6088836 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWS with 30 m cable | 6088837 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWG, cable length: 20 m | 6088838 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-2.5 mWS with 10 m cable | 6088839 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWS with 50 m cable | 6088840 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor 0-1.0 mWS with 30 m cable | 6088841 | ||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly. When used in potentially explosive areas a breakdown barrier must be provided for the connection! | |||
Level control/accessories (8) | |||
Cable clamp for fastening a signal transmitter in the pump chamber. The clamp is fixed in the pump chamber with a hook; the cable of the signal transmitter is clamped and fixed via the intrinsic weight of the signal transmitter. | |||
Small compressor for continuous or periodic aeration of the velocity head bell, including non-return valve, 3 m hose and T-connector. | |||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex-rated cut-off relay (3-circuit) | 2510698 | ||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex-rated cut-off relay (4-circuit) | 2510699 | ||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex-rated cut-off relay (2-circuit) | 2513059 | ||
Ex cut-off relay for the galvanically isolated connection of float switches for level control in explosive atmospheres. For wall fixation! | |||
Ex cut-off relay for the galvanically isolated connection of float switches or electrodes for level control in explosive atmospheres. Suitable for wall fixation or for installation in switch cabinets with 35 mm DIN rail! | |||
Breakdown barrier (Zener barrier) for the galvanically isolated connection of one level sensor in an explosive atmosphere. Suitable for wall fixation. | |||
Motor protection (2) | |||
External pencil electrode in stainless steel housing with cable for monitoring leakage in the sealing chamber. Rod length must be adjusted to the respective installation situation on site. | |||
External pencil electrode in stainless steel housing with cable for monitoring leakage in the sealing chamber. Rod length must be adjusted to the respective installation situation on site. | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
Commissioning | Commissioning Drainage pumps | 2219491 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Wilo-Live Assistant | Wilo-Live Assistant Service | 2216415 | |
The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes:
| |||
Maintenance | Maintenance BASIC Drainage pumps | 2219540 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Drainage pumps | 2219514 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Drainage pumps | 2219567 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
More suitable services | |||
Supervision | Supervision Drainage pumps | 2219348 | |
Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes:
| |||
Repair | Repair Drainage pumps | 2219632 | |
Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes:
| |||