Wilo-Jet FWJ

Series description

Design

Self-priming water-supply units

Application

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Type key

Example:FWJ-202-EM
Jet FWJSystem consisting of Wilo jet pump with integrated automatic (Fluidcontrol)
2Nominal flow rate Q in m³/h at optimum efficiency
02Index for pump pressure (02 < 03 < 04):
version 02 with lower pressure than version 03 or 04
(no indication of number of impellers)
EMSingle-phase current,
alternating current, 1~230 V, 50 Hz
/3Version of the system with Wilo-HiControl 1

Special features/product advantages

  • Ideal for use in outside areas (hobby, garden) thanks to durable construction; continuously good performance thanks to corrosion-free materials
  • Completely preassembled system, simple installation and maintenance through Plug&Pump system and 360° rotatable display, which means that it can be read from any direction
  • Electronic pump control
  • High operational reliability thanks to dry-running protection

Technical data

For Wilo-Jet FWJ:

  • Mains connection: 1~230 V, 50 Hz
  • Perm. inlet pressure: Max. 1 bar
  • Start-up pressure: 1.5 bar
  • Switch off volume flow: 95 l/h
  • Perm. fluid temperature: +5 °C to +35 °C
    (+55 °C for 10 min)
  • Perm. operating pressure: Max. 6 bar
  • Protection class: IP 44
  • Pressure-side connection: R1
  • Suction-side connection: G1

For the wibutler communication box:

  • Standard communication/frequency:
    EnOcean / 868 MHz, Z-Wave / 868 MHz, Zigbee / 2.4 GHz, WLAN / 802.11 b/g/n 2.4 GHz
  • Power supply:
    1~ 100 - 240 V AC / 50-60 Hz
  • Plug type: EU plug
  • Miscellaneous: Integrated loudspeaker, integrated 8 GB SSD,
    1 GB DDR3-RAM, 1 GHz CPU ARMADA 370 ARM v7,
    1 x Ethernet-RJ45, 1 x 3.5 mm stereo output
  • Manufacturer: iEXERGY

Equipment/function

  • Directly flanged motor
  • Connection cable with plug
  • Thermal motor protection switch
  • Automatic pump control
  • Low-water cut-out switchgear

Materials

  • Pump housing made of 1.4301 stainless steel
  • Impeller made of 1.4301 stainless steel
  • Shaft 1.4005 stainless steel
  • Mechanical seal made of carbon/ceramic
  • Stage chambers made of Noryl
  • Pressure monitor housing made of nylon PA6
  • Diffuser/injector made of Noryl
  • Seal made of NBR

Scope of delivery

  • Wilo-Jet WJ pump
  • Pump control Wilo-HiControl 1
  • Installation and operating instructions for the Wilo-Jet WJ pump
  • Installation and operating instructions for the Wilo-HiControl 1 switchgear
  • Optional carrying handle

Accessories

  • Suction hose set 1
  • Shut-off ball cock Rp1
  • Foot valve R11/4
  • Non-return valve R1

Duty chart

Pump curves

Downloads

General overview

Edition 2017
Page format A4
Number of pages 72

PDF (46 MB)

Download

Wilo-Fluidcontrol / - EK

Article Number 2049542
Edition 0804
Version number 02
Page format A4
Number of pages 13

PDF (445 kB)

Download

Wilo-Jet WJ

Article Number 2050754
Edition 1603
Version number 05
Page format A4
Number of pages 9

PDF (682 kB)

Download

Product

PDF: Wilo-Jet FWJ

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download