Wilo-EMU TR 22… – TR 40…

Special features/product advantages

  • Works reliably.
    Clogging-free operation with backward-curved incoming flow edge and self-cleaning helix hub.
  • Reduced costs.
    Quick and simple to install as a ground, wall or pipe fixation. Even in the smallest of space requirements.

Series description

Design

Compact directly driven submersible mixer

Application

  • Swirling of deposits and solids in rain spillway basin and pump sump
  • Destruction of floating sludge layers
  • Other areas of application in agriculture and water supply

Type key

Example:Wilo-EMU TR 36.114-6/8 S17
TRSubmersible mixer
36x 10 = nominal propeller diameter in mm
114x 10 = propeller speed in rpm
6Number of poles
8x 10 = stator length in mm
S17Propeller code for welded propellers (without = PUR propeller)

Technical data

Equipment/function

  • stationary installation on wall and floor
  • flexible installation via lowering device
  • can be swivelled vertically and horizontally when installed with a lowering device

Materials

  • Housing components: A 48 Class 35/40 B (EN-GJL-250)
  • Propeller: A 48 Class 35/40 B (EN-GJL-250), PUR or AISI 316TI (1.4571)
  • Propeller hub: AISI 316TI (1.4571)
  • Screwed connections: AISI 304 (1.4301) or AISI 316TI (1.4571)
  • Seal bushing: AISI 316TI (1.4571)

Description/design

Propeller

2- or 3-blade propeller with a nominal propeller diameter of 8.5 inch (220 mm) to 16 inch (400 mm). Entwining-free design made possible by backward-curved incoming flow edge and patented helix hub.

Motor

Wilo-submersible motor of the T-series with standard connection for an easy and efficient adaptation of the motor output. The motor heat is given off directly to the fluid via the housing. The winding is equipped with a temperature monitor. Large-sized inclined and grooved ball bearings ensure long service life of the motor bearings.

Sealing

Double shaft sealing with large-volume sealing chamber to collect leakage from the mechanical seal; available with external sealing chamber electrode upon request. On the fluid side, a corrosion- and wear-resistant mechanical seal made of solid silicon carbide material is used; on the motor side, a rotary shaft seal is used. On TR 36 / TR 40 types, a seal bushing ensures long-term corrosion-protected fit of the mechanical seal.

Cable

The power cable is a type NSSHÖU cable for heavy mechanical loads. The power cable enters the motor housing through a water pressure-tight cable lead-in with strain relief and bend protection. The individual wires as well as the cable sheath are additionally sealed to keep out fluids.

Configuration

A separate configuration must be carried out for each application to ensure optimum generation of fluid current. Carefully follow the instructions for the supplied configuration when installing the units.

Commissioning

Operating mode S1 ‐ permanent operation:

The submersible mixer must be immersed when operated. Surfacing the propeller is strictly prohibited. In the case of fluctuating fluid levels, the system should switch off automatically if the degree of water submersion drops below the minimum level. The power cables must be installed in a way that these cannot be drawn into the propeller!

Options

  • Special voltages
  • Thermistor temperature sensor
  • External sealing chamber control
  • Ceram C0 coating
  • Ex-rated to ATEX, FM or CSA

Accessories

Scope of delivery

  • Submersible mixer with mounted propeller hub and cable
  • Cable length per customer request
  • Accessories per customer request
  • Operating and maintenance manual

Product

Design

Prechamber

-

Gear chamber

-

Sealing chamber

directly driven

FC operation

Single-stage planetary gear

-

Two-stage planetary gear

-

Sealing by mechanical seal on motor side

-

Sealing by rotary shaft seal on motor side

Sealing by mechanical seal on fluid side

Seal for rotary shaft seal on fluid side

-

Explosion protection

Application

Wet well installation, ground installation

Wet well installation, wall fixation

Lowering device for wet well installation

Tripod for wet well installation

-

Materials

Cast propeller

Steel propeller

PUR propeller

PUR/GRP propeller

-

GRP propeller

-

Equipment/function

Motor temperature monitoring, bimetal

PTC motor temperature monitoring

º

Motor leakage monitoring

Sealing chamber monitoring

º

Propeller blades can be replaced individually

-

Product

PDF: Wilo-EMU TR 22… – TR 40…

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download