COR/T-1 Helix VE413-GE

Ficha técnica

Campo de aplicación admisible
  • Temperatura máxima del fluido
    40 Celsius
  • Temperatura ambiente máxima
    40 Celsius
  • Presión máxima de trabajo
    16 bar
  • Conexión de tubería del lado de aspiración
    G 1½
  • Conexión de tubería del lado de impulsión
    G 1½
  • Número de bombas de reserva
    0
  • Número de bombas de funcionamiento
    1
  • Número de bombas
    8.0 m³/h
Datos del motor
  • Alimentación eléctrica
    3~400 V, 50 Hz
  • Tolerancia de tensión
    400/50:+/-10%_380/60:+/-10%_460/60:+/-10% %
  • Clase de aislamiento
    F
  • Tipo de protección
    IP55
  • Potencia nominal mecánica
    3.00 kW
  • 6.4 A
  • Rendimiento del motor ηm 50 %
    89
  • Rendimiento del motor ηm 75 %
    89.5
  • Rendimiento del motor ηm 100 %
    89.5
Materiales
  • Carcasa de la bomba
    1.4301, X5CrNi18-10
  • Eje
    1.4301, X5CrNi18-10
  • Rodete
    1.4307, X2CrNi18-9
  • Material de la junta
    EPDM
  • Cierre mecánico
    Q1BE3GG
Información de pedidos
  • Peso neto aproximado
    111.00 kg
  • Descripción
    2547966
  • Marca
    Wilo

Esquema de bornes

MHIE, MVIE, MHIE, MVIE 3~400 V ≤7.5 kW

MHIE, MVIE, MHIE, MVIE 3~400 V ≤7.5 kW
MHIE, MVIE, MHIE, MVIE 3~400 V ≤7.5 kW

Información de pedido

Information for order placements
  • Marca
    Wilo
  • Denominación del producto
    COR/T-1 Helix VE413-GE
  • Número EAN
    4048482793160
  • Descripción
    2547966
  • Peso bruto aproximado
    147.0 kg
  • Peso neto aproximado
    111.00 kg
  • Longitud total
    1235.0 mm
  • Altura sin embalaje
    1160 mm
  • Color
    verde/negro/plata
  • Propiedades del embalaje
    Embalaje de transporte
  • Tipo de embalaje
    Palé especial
  • Número por capa
    1
  • Ancho sin embalaje
    821.0 mm
  • Cantidad mínima de pedido
    1
  • Número por palé
    1

Texto de especificación

Highly efficient and compact pressure-boosting system with break tank for system separation in accordance with EN 1717 for indirect connection. Consisting of break tank, float valve, float switch as dry-running protection signal transmitter and a non self-priming, vertical stainless steel high-pressure multistage centrifugal pump in glanded version of the Helix VE series. Ready for connection with pipework mounted on a PE base frame, including air-cooled integrated frequency converter with all of the necessary measurement and adjustment equipment.

For fully automatic water supply and pressure boosting in residential­, office­ and administrative buildings, hotels, hospitals, department stores (systems with a standby pump are to be provided for this purpose within the scope of DIN 1988 and DIN EN 806) as well as in industrial systems.

For pumping drinking water, process water, cooling water, firefighting water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Special features/product benefits

  • Easy operation and configuration thanks to Green Button with blocking function and display
  • WRAS/KTW/ACS approval of the pump for all parts that come in contact with the fluid (EPDM version)
  • Highly efficient pump hydraulics from the Helix VE series in conjunction with IE4 IEC standard motors and continuous auto control with integrated frequency converter
  • Disproportionately large frequency converter control range from 25 Hz up to a maximum of 60 Hz (version dependent)
  • Integrated full motor protection via PTC
  • Integrated dry-running detection with automatic cut-out in event of low water via performance characteristics of the motor control electronics
  • Parts that come in contact with the fluid are corrosion-resistant
  • Hydraulics of entire system are pressure-loss optimised
  • Customized systems on request

Equipment/function

  • One pump of the Helix VE series, with IE4 equivalent standard motor and continuous auto control with integrated frequency converter
  • Base frame made of polyethylene (PE)
  • Shut-off device on the pressure side
  • Non-return valve on the pressure side
  • 8 litre diaphragm pressure vessel, PN 16 including throughflow fitting in accordance with DIN 4807, pressure side
  • Pressure switch (6/10/16 bar), pressure side
  • Pressure gauge, pressure side

Control modes

  • Constant or variable pressure: Pressure control with sensor, setpoint adjustment with Green Button or by means of external signals
  • PID control: other constant control variables (temperature, volume flow, pressure…) with sensor, setpoint adjustment with Green Button, by means of external signals

The electronic module provides various protective functions. This includes:

  • Overload protection
  • Detection of low water
  • Network undervoltage or overvoltage
  • Ambient temperature too high
  • Missing phase
  • Blocked pump
  • Short-circuit

Error messages are issued on the display.

Input:

  • In1 : Input sensor signal 4 – 20 mA, 0 – 10 V, 0 – 20 mA or 2 – 10 V
  • In2 : Input setpoint 0 – 20 mA, 0 – 10 V, 4 – 20 mA or 2 – 10 V

Output:

  • + 24 V voltage output with max. contact strength of 50 mA
  • Potential-free collective fault and run signal
  • External On/Off mode. IR communication
  • Plug-in position for Wilo IF modules Modbus, BACnet, CAN, PLR, LON for connection to the building automation

The pump is suitable for water supply, water distribution and pressure boosting, industrial circulation systems, process water and closed cooling circuits. It can also be used in washing systems as well as for irrigation.

Recommended accessories (to be ordered separately)

  • Overflow run-off box
  • Overflow cover
  • SCe switchgear
  • Flexible connection pipes or compensators
  • Diaphragm expansion tank

Standards followed

  • Specifications for drinking water installations (TRWI) DIN 1988 (EN 806)
  • Diaphragm pressure vessel/ diaphragm expansion tank DIN 4807
  • Electronic equipment for use in power installations EN 50178
  • Electrical equipment of machines EN 60204-1
  • Safety of household and similar electrical appliances EN 60335-1
  • Low-voltage switchgear and controlgear assemblies EN 60439-1/61439-1
  • EMC – Immunity for industrial environments EN 61000-6-2
  • EMC – Emission standard for residential, commercial and light-industrial environments (EN 61000-6-3)
Materiales
  • Carcasa de la bomba
    1.4301, X5CrNi18-10
  • Rodete
    1.4307, X2CrNi18-9
  • Material de la junta
    EPDM
  • Eje
    1.4301, X5CrNi18-10
  • Material de la tubería
    1.4307, X2CrNi18-9
Datos de funcionamiento
  • Fluidos admisibles
    Water
  • Temperatura mínima del fluido
    5 Celsius
  • Boca de impulsión
    G 1½
  • Temperatura máxima del fluido
    40 Celsius
  • Presión máxima de trabajo
    16 bar
  • Presión de entrada
    0.59 bar
  • Temperatura ambiente máxima
    40 Celsius
Datos del motor
  • Alimentación eléctrica
    3~400 V, 50 Hz
  • Potencia del eje P2 (Q = máx.) del rodete seleccionado * Número de bombas
    3000 W
  • Potencia nominal mecánica
    3.00 kW
  • Velocidad nominal
    3600 rpm
  • Tipo de arranque
    Arranque progresivo (SS)
  • 6.4 A
  • Rendimiento del motor ηm 50 %
    89
  • Rendimiento del motor ηm 75 %
    89.5
  • Rendimiento del motor ηm 100 %
    89.5
  • Clase de aislamiento
    F
  • Tipo de protección
    IP55
  • Tipo de protección
    IP55
Dimensiones de instalación
  • Conexión de tubería del lado de aspiración
    G 1½
  • Conexión de tubería del lado de impulsión
    G 1½
  • Conexión de rebose
    -
  • Volumen bruto del depósito
    150.0 l
Información de pedidos
  • Peso neto aproximado
    111.00 kg
  • Marca
    Wilo
  • Descripción
    2547966

Downloads

Wilo-Helix VE 22-36-52

Article Number 4151995
Edition 1601
Número de versión 05
Formato de página A4
Número de páginas 44

PDF (9 MB)

Descargar

Wilo-Helix VE 2-4-6-10-6

Article Number 4151993
Edition 1601
Número de versión 04
Formato de página A4
Número de páginas 40

PDF (8 MB)

Descargar

PDF: COR/T-1 Helix VE413-GE

Configurar

Selección de páginas

Información opcional

Puede introducir los datos personales que desea que aparezcan en el encabezamiento.

Guardar