Wilo-Comfort-Vario COR MHIE.../VR

Series description

Special features/product advantages

  • Compact system with outstanding price/performance ratio due to MHIE series stainless steel high-pressure multistage centrifugal pumps with integrated air-cooled frequency converters
  • Superproportionally large control range
  • Integrated full motor protection with thermistor sensor (PTC)
  • Integrated dry-running detection with automatic deactivation in the event of low water via the motor control electronics

Design type

Pressure boosting system with 2 to 4 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps with speed-controlled motors

Application

  • Fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems.
  • Pumping of drinking water and process water, cooling water, fire water (apart from fire-extinguishing systems in accordance with DIN 14462 and with the approval of the local fire safety authorities) or other types of industrial water that do not attack the materials either chemically or mechanically and do not contain abrasive or long-fibre constituents.

Equipment/function

  • 2-4 pumps per system
  • Infinitely variable control mode through the use of pumps with integrated frequency converters
  • Components that come in contact with fluid are corrosion-resistant
  • Galvanized base frame with height-adjustable vibration damper for insulation against structure-borne noise
  • Shut-off valve at each pump, on the suction and pressure sides
  • Non-return valve, pressure side
  • Diaphragm pressure vessel 8 l, PN16, pressure side
  • Pressure sensor, on the discharge side
  • Optional pressure gauge, suction side
  • Pressure gauge, discharge side
  • Optional low-water cut-out switchgear

Scope of delivery

  • Factory-mounted, connection-ready pressure boosting system checked for functionality and impermeability
  • Packaging
  • Installation and operating instructions

Type key

Example:

Wilo-COR-3 MHIE 406/VR

COR

Compact pressure boosting system with integrated speed control

3

Number of pumps

MHIE

Pump series

4

Rated volume flow [m3/h] of the single pump

06

Number of single-pump stages

VR

Control unit; VR = Vario controller

Technical data

  • 3~400 V ± 10 %, 50 Hz; 3~380/440 V ±10 %, 60 Hz mains connection, depending on type also 1~230 V, 50/60 Hz (other versions on request)
  • Max. fluid temperature 50 °C (70 °C optional)
  • Ambient temperature max. 40 °C
  • Operating pressure 16 bar
  • Inlet pressure 10 bar
  • Nominal connection diameters on discharge side R 2” - DN 250
  • Nominal connection diameters on inlet side R 2" - DN 250
  • Speed range 1200- 3770 rpm
  • Protection class IP 54
  • Fuse protection on mains side A, AC 3 according to motor power and EVU regulations
  • Approved fluids (other fluids on request):Note on fluids: Approved fluids are generally water mixtures which do not chemically or mechanically attack the materials used and do not contain either abrasive or fibrous matter
    • Cooling water
    • Potable and process water
    • Fire water (wet line; for dry lines on request - comply with separate specifications of DIN 1988 (EN 806) and of fire-protection authorities.)

Materials

  • Impellers 1.4301/1.4404 stainless steel
  • Stage chambers 1.4301/1.4404 stainless steel
  • Pump housing made of 1.4301/1.4404 stainless steel
  • Shaft 1.4404 stainless steel
  • Gaskets EPDM (EP851)/FKM (Viton)
  • Housing cover made of 1.4301/1.4404 stainless steel
  • Housing bottom 1.4404 stainless steel
  • Mechanical seal made of tungsten carbide/carbon
  • Pressure shroud 1.4301/1.4404 stainless steel
  • Bearing, tungsten carbide
  • Pump base aluminium

Description/construction

  • Base frame: galvanised and provided with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise; other versions on request
  • Pipework: complete pipework made of stainless steel, suitable for the connection of all piping materials used in building services; the pipework is dimensioned according to the overall hydraulic performance of the pressure boosting system
  • Pumps: 2 to 4 pumps from the MHIE 2.., 4.., 8.. and 16.. series switched in parallel are used; adapted frequency converters on the pump motor enable continuous auto control for all pumps of these series; all pump components in contact with fluid are made of stainless steel
  • Valves: each pump is fitted on the suction and pressure side with a shut-off valve with DVGW approval mark or annular shut-off valves and a pressure-side DVGW-approved non-return valve
  • Diaphragm pressure vessel: 8 l/PN 16 located on the discharge side with a butyl rubber diaphragm, completely safe in accordance with food safety laws; for testing and inspection purposes, with shut-off ball cock, with drain and throughflow fitting according to DIN 4807
  • Pressure sensor: 4 to 20 mA, located on the discharge side for activating the central Comfort-Vario controller
  • Pressure display: suction- and discharge-side pressure gauge (ø 63 mm); additional digital display of discharge pressure in the alphanumeric LCD display of the Comfort-Vario controller
  • Controller: the system is standard-equipped with a VR Vario controller

Duty chart

Comfort-Vario COR

Downloads

Wilo-VR-System

Article Number 2040503
Edition 1108
Version number 02
Page format A4
Number of pages 26

PDF (341 kB)

Download

om_mhie_2g_3ph_1_1_up_to_4_kw_4090993

Edition 0506
Version number 02
Page format A4
Number of pages 34

PDF (3 MB)

Download

MHIE 1ph

Article Number 4090996
Edition 1609
Version number 04
Page format A4
Number of pages 21

PDF (1 MB)

Download

Product

PDF: Wilo-Comfort-Vario COR MHIE.../VR

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download