Wilo-Drain TM/TMW/TMR 32

Series description

Special features/product advantages

  • The minimal residual water level is 2 mm (TMR version only)
  • Ergonomic handle, low weight, user-friendly thanks to its ready-to-plug design (Plug&Pump)
  • Operational reliability due to built-in sheath flow cooling, mechanical seal with sealing chamber and stainless steel-encapsulated motor
  • Cable length 4 to 10 m, depending on the type
  • Fluid temperature: max. 90 °C

Design type

Submersible drainage pump

Application

Pumping of

  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater

Equipment/function

  • Connection cable with plug
  • Thermal motor monitoring
  • Sheath current cooling

Scope of delivery

  • Pump with cable, plug and fitted float switch (except TM 32/8)
  • Non-return valve included (except TM 32/7 and TM 32/8-10M)
  • Hose connection with male thread or hose nozzle (ø 35 mm)
  • Installation and operating instructions

Type key

Example:

Wilo-Drain TMW 32/11 HD

TM

Submersible drainage pump

W

Version:

  • without: Standard
  • W: with turbulator
  • R: with flat suction

11

Max. delivery head in m

HD

Special version:

  • HD: Special material version
  • 10M: Cable length, e.g. 10°m

Technical data

  • Mains connection 1~ 230 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth: 1 or 7 m, depending on type
  • Fluid temperature: 3 ... 35 °C, briefly up to 3 min.: max. 90 °C
  • Cable length: 4 or 10 m, depending on type
  • Pressure port: Rp 1¼

Materials

TM/TMW/TMR:

  • Motor housing 1.4301(AISI 304)
  • Pump housing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Shaft: 1.4104 (AISI 430F)
  • Seal:
    • On motor side: NBR
    • Fluid side: Carbon/ceramic

TMW ... HD:

  • Motor housing 1.4404 (AISI 316L)
  • Pump housing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Shaft: 1.4404 (AISI 316L)
  • Seal:
    • On motor side: NBR
    • Fluid side: Carbon/ceramic

Description/construction

Submersible pump for stationary and portable wet-well installation in fully automatic mode with attached float switch.

Hydraulics

The pumps of the TM series are equipped with a multi-channel impeller and have a free ball passage of 10 mm (except TMR). The pressure connection is a vertical threaded connection.

Configuration options:

  • TMW The Wilo-Drain TMW twister function ensures continuous turbulence in the suction area of the pump, preventing the sinking and settling of settling sediments. This results in a clean pump sump and reduces the build-up of odours. The Twister function can be disabled.
  • TMR The Wilo-Drain TMR special strainer enables pumping off of the fluid to a residual level of 2 mm.

Motor

Submersible motor in single-phase version with sheath current cooling (cooling by the pumped fluid between pump and motor housing) and built-in thermal overload protection with automatic reactivation.

Seal

The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.

Cable

The pump is equipped with a 3 or 10 m connection cable with shockproof plug and an attached float switch (not TM 32/8-10M).

Duty chart

Wilo-Drain TM/TMR/TMW 32

Downloads

REACH Regulation

Edition 2018-10
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (19 MB)

Download

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

Wilo-Drain TM/TMW/TMR 32

Article Number 2036885
Edition 2018-08
Version number 09
Page format 209.9 x 297.0 mm
Number of pages 96

PDF (3 MB)

Download

Product

PDF: Wilo-Drain TM/TMW/TMR 32

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download