Wilo-DrainLift Box

Your advantages

• Easy to install due to integrated pump and non-return valve
• The large tank volume ensures a low number of switching processes
• Easy maintenance
• Stainless steel tile frame with trap

Construction

Small sewage lifting unit for concealed floor installation

Application

Pumping of sewage without faeces (according to DIN EN 12050-2) that cannot be piped to the sewer system through the use of natural falls.

Equipment/function

• Ready-to-plug
• Plastic tank with already mounted drainage pump, pressure pipe and integrated non-return valve
• Thermal motor monitoring
• Level control with float switch

Scope of delivery

• Lifting unit for concealed floor installation with complete pipework, non-return valve and pre-installed pump
• Standard version und ‘D’ version with shockproof plug
• ‘DS’ version incl. switchgear and connection cable with bare ends
• Tank cover with tile frame and floor drain
• Shell cover
• O-ring to seal shell cover and as anti-syphon trap
• Pressure hose (inside diameter: 40 mm) incl. hose clips
• Installation and operating instructions

Type key

Technical data

• Mains connection 1~230 V, 50 Hz
• Mains connection cable 10 m (5 m with 40/10), with shock-proof plug
• Operating mode S3-25%
• Fluid temperature max. 35 °C, with 32/8 and 32/11 for short periods (3 min) 60 °C
• Pressure port Ø 40 mm
• Inlet connection 100 mm
• Ventilation connection 100 mm
• Protection class: IP68
• Gross tank volume 113 l
• Switching volume 24-29 l

Materials

• Concealed floor tank: PE plastic
• Motor: Stainless steel
• Hydraulics housing: PP-GF30 plastic with box 32…, cast iron EN-GJL--200 with box 40

Description/construction

Automatically switching lifting unit with built-in submersible pump and non-return valve. Ready for installation in concealed floor structures. Flexible due to two inlet possibilities in DN 100.