Wilo-EMU FA...WR

Series description

Your advantages

  • Selectively dissolves deposits in the sand trap via a mechanical stirring apparatus
  • Process reliability ensured by use of Abrasit and stainless steel
  • Low vibration and long service life with direct mounting of the stirring apparatus on the impeller
  • Durable due to Ceram-coated internal surfaces of the hydraulics which enhance wear resistance


Submersible sewage pump with mechanical stirring apparatus for continuous duty for stationary wet well installation.


Pumping of highly abrasive and faeces-containing sewage without long-fibre components


  • Heavy-duty version made of grey cast iron
  • Self-cooling motors with 1- or 2-chamber system
  • Easy installation due to suspension unit or pump support foot
  • Mechanical stirring apparatus attached directly to the impeller
  • Mixer head made of Abrasite (chilled cast iron)

Scope of delivery

  • Submersible sewage pump with mechanical stirring apparatus
  • Cable length up to motor size 17 available in increments of 10 m, from motor size 20 and higher according to customer request
  • Accessories according to customer request
  • Operating and maintenance manual

Type key


Wilo-EMU FA 08.52WR + T 17-6/16HEx


FA 08.52WR


Submersible sewage pump


x10 = pressure connection nominal diameter, e.g. DN 80


Performance indicator


Vortex impeller


With mechanical stirring apparatus


T 17-6/16HEx


Motor type:

T = surface-cooled motor without cooling system

FK, FKT, HC = self-cooling motor with active cooling system




Number of poles


x10 = package length in mm


Seal version:

H = rotary shaft seal/mechanical seal

G = two separate mechanical seals

K = block seal cartridge with two mechanical seals



Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode with self-cooling motor: S1
  • Protection class: IP68
  • Max. fluid temperature: 3 - 40°C; higher temperatures on request
  • Free ball passage: 23 – 58 mm.
  • Permanently lubricated roller bearings
  • Max. immersion depth: 20 m


  • Housing components: EN-GJL
  • Impeller: EN-GJL or EN-GJS
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: NBR or SiC/SiC
  • Shaft: Stainless steel 1.4021
  • Stirring apparatus: Abrasite


Submersible sewage pump with mechanical stirring apparatus as submersible monobloc unit for stationary and portable wet well installation.


The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter content is 8%, depending on the hydraulics and impeller type.

Vortex impellers are used exclusively as the impeller shape. A mechanical stirring apparatus is mounted to these as an axial extension of the motor shaft. The mixer head is made of Abrasite chilled cast iron.


Surface-cooled motors (T motors) give off their heat directly to the surrounding fluid via the housing components and can be used in immersed state for continuous duty.

The oil-filled motors (FK motors) and self-cooling dry motors (FKT, HC motors) give off their heat to the pumped fluid via a built-in heat exchanger. As a result, these motors are suitable for continuous duty either in immersed or non-immersed state.

All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can be monitored with an optionally sealing chamber electrode.

All filling fluids used are potentially biodegradable and environmentally safe.

The cable inlet on T, HC and FKT motors is longitudinally watertight. Up to motor size 17, cable lengths are available in fixed lengths measured in 10 m intervals. Starting from motor size 20, the cable length can be individually configured.


Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:

  • Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
  • Version G: Two independently-acting mechanical seals
  • Version K: Block seal cartridge with two independently acting mechanical seals

Duty chart

Wilo-EMU FA ... WR


REACH regulation

Edition 2020-08
Page format 209.9 x 296.7 mm
Number of pages 4

PDF (1 MB)


CE Booklet Wilo T motor + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6072704
Edition 1606
Version number 05
Page format 209.9 x 297.0 mm
Number of pages 96

PDF (8 MB)


CE Booklet Wilo FK motor + EMU FA, Rexa SUPRA

Article Number 6074692
Edition 1606
Version number 04
Page format 209.9 x 297.0 mm
Number of pages 56

PDF (5 MB)


CE Booklet Wilo FKT motor + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6074691
Edition 1606
Version number 03
Page format 209.9 x 297.0 mm
Number of pages 76

PDF (7 MB)



Article Number 6074690
Edition 1606
Version number 04
Page format A4
Number of pages 32

PDF (695 kB)


General overview 2020 International version

Edition 2020
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 78

PDF (48 MB)


Wilo Motor T 12 ... 72 + EMU FA, Rexa SUPRA, Rexa SOLID

Article Number 6067561
Edition 2019-01
Version number 04
Page format 209.9 x 297.0 mm
Number of pages 64

PDF (5 MB)




Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.