Wilo-Rexa FIT

Special features/product advantages

  • Ready to plug in and use
  • Attached float switch (A-model) enables easy operation
  • Safe vortex hydraulics with large, free ball passage to prevent clogging during operation
  • Sealing chamber with optional external monitoring
  • Lightweight

Series description

Design type

Submersible sewage pump for intermittent operation for stationary and portable wet well installation, as well as for the stationary dry well installation.

Application

Equipment/function

  • Winding temperature monitoring with bimetal strip
  • Optional external pencil electrode for sealing chamber control

Scope of delivery

  • Submersible sewage pump with 10 m cable
  • Cable version depending on the variant:
    • With bare cable ends (O)
    • With plug (P)
    • With float switch and plug (A)
  • Operating and maintenance manual

Type key

Example:

Wilo-Rexa FIT V06DA-110/EAD1-2-T0015-540-A

Rexa

Submersible sewage pump

FIT

Series

V

Vortex impeller

06

Nominal diameter of pressure connection e.g. DN 65

D

Hydraulics drilled on the suction side in accordance with DIN drilled

A

Standard material version, hydraulics

110

Hydraulics definition

E

Surface-cooled motor

A

Standard material version motor

D

Seal with two independent mechanical seals

1

IE efficiency class, e.g. 1 = IE1 (derived from IEC 60034-30)

-

not Ex-rated

2

Number of poles

T

Mains connection version:

M = 1~

T = 3~

0015

Value/10 = motor power P2 in kW

5

Frequency (5 = 50 Hz, 6 = 60 Hz)

40

Code for rated voltage

A

Additional electrical equipment:

O = with bare cable end

P = with plug

A = with float switch and plug

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10 %
  • Protection class: IP68
  • Insulation class: F
  • Fluid temperature: 3 - 40°C, max. 60°C for 3 min
  • Free passage: 50 / 65 / 80 mm
  • Cable length: 10 m

Materials

  • Motor housing: 1.4301
  • Hydraulics housing: EN-GJL 250
  • Impeller: EN-GJL 250
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/MgSiO4
  • Shaft end: Stainless steel 1.4021

Description/construction

Duty chart

Rexa FIT

Downloads

Certification Booklet Wilo-Rexa FIT

Article Number 6069823
Edition 1701
Version number 04
Page format A4
Number of pages 4

PDF (207 kB)

Download

General overview 2018 International version

Article Number 2200591
Edition 2018
Version number 1
Page format 209.9 x 297.0 mm
Number of pages 72

PDF (11 MB)

Download

Product

PDF: Wilo-Rexa FIT

Configure

Page selection

Format selection

Optional information

You can enter any personal information that you want to be displayed in the header.

Download