DrainLift SANI CUT-L
Lifting unit
Compact, ready for connection, and fully submersible double pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Wilo-DrainLift SANI CUT-L with non-return valve
Number of results: [3]
| Product description | Operating mode per pump | Free ball passage of the hydraulics | Mains plug | Mains connection | Article number | |
|---|---|---|---|---|---|---|
DrainLift SANI CUT-L.20/T540/1-O | S3-10% | 10 mm | no | 3~400/415 V, 50 Hz | 6099536 | |
DrainLift SANI CUT-L.27/T540/1-O | S3-10% | 10 mm | no | 3~400/415 V, 50 Hz | 6099537 | |
DrainLift SANI CUT-L.30/T540/1-O | S3-10% | 10 mm | no | 3~400/415 V, 50 Hz | 6099538 |
Recommended services
DrainLift SANI CUT-L
Design
Compact, ready for connection, and fully submersible double pump lifting unit with macerator hydraulics for pumping sewage containing faeces.Application
As a lifting unit for floor-mounted or concealed wall installation in buildings, or for concealed floor installation in pump chambers:
- In cases where sewage cannot be discharged directly into the sewer system through a natural downward slope
- For backflow resistant drainage in cases where the discharge point is below the backflow level
Liquid
Sewage pumping according to 12050
The lifting unit follows DIN EN 12050-1.
Equipment/function
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Level sensor 4 … 20 mA for level measurement
- Non-return valve
- Thermal motor monitoring with bimetallic sensor
Type key
Example: | DrainLift SANI CUT-L.27/T540/1-CEE |
DrainLift | Product family |
SANI CUT | Sewage lifting unit with macerator |
L | Size |
27 | Max. delivery head in m at Q = 0 |
T | Mains connection:
|
540 | Electrical Values (rated frequency and rated voltage):
|
1 | Motor and switchgear version:
|
CEE | Connection cable and plug design:
|
Technical data
- Mains connection: 1~230 V, 50 Hz; 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C (37 ... 104 °F), 65 °C (149 °F), 5 min
- Max. ambient temperature: 3 ... 40 °C (37 ... 104 °F)
- Tank volume: 64 l (16 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height: 29 l/7 US.liq.gal. (180 mm*)/39 l/10 US.liq.gal. (250 mm*)/48 l/12 US.liq.gal. (315 mm*)
- Discharge port: DN 32/40, PN 6; 40 mm, PN 6
- Inlet connection: DN/OD 110; DN/OD 160
- Ventilation connection: DN/OD 50
- IP rating of lifting unit: IP68 (2 mWC/7 d)
- IP rating of switchgear: IP54
- Noise level: 70 dB(A)
Materials
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B)
- Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
- Macerator: 1.4528/59 HRC (AISI 440B+Co)
- Tank: PE
- Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B)
Construction
Wilo-Control MS-L
- Main switch (only for version "O" without connection cable and plug)
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
Scope of delivery
- Lifting unit with pre-wired switch gear
- Version with plug: connection cable with plug
- Version "O": without connection cable and plug
- Pipe connection DN/OD 40
- HT double socket DN/OD 50 for ventilation connection
- HT double socket DN/OD 50 for drain connection
- Inlet set with hole saw 124 mm (5 in) and seal for HT pipe DN/OD 110
- Floor fixation set
- Noise insulation mat
- 9 V rechargeable battery
- Installation and operating instructions