VeroLine-IPL
In-line pump
Glanded pump in in-line design with screwed connection or flange connection
Wilo-VeroLine-IPL
Number of results: [139]
Nominal flange diameter
Motor efficiency class
Port-to-port length L0
0
[0]
Mechanical seal
Rated power P2
0
[0]
Number of poles
Recommended services
VeroLine-IPL
Design
Glanded pump in in-line design with screwed connection or flange connectionApplication
Pumping of heating water (acc. to VDI 2035), chilled water and water/glycol mixtures without abrasive substances in heating, chilled water and cooling systems.Type key
Example | IPL 40/160-4/2 |
IPL | In-line pump |
40 | Nominal diameter DN of the pipe connection |
160 | Nominal impeller diameter |
4 | Rated motor power P2 in kW |
2 | Number of poles |
Technical data
- Permissible temperature range -20 °C to +120 °C
- Mains connection 3~400 V, 50 Hz (others on request)
- IP rating IP55
- Nominal diameter Rp 1 to DN 100
- Max. operating pressure 10 bar (special version: 16 bar)
Materials
- Pump housing and lantern: EN-GJL-250
- Impeller: PPO fibreglass-reinforced EN‐GJL‐200 (depending on pump type)
- Shaft: 1.4021
- Mechanical seal: AQEGG; other mechanical seals on request
Construction
Single-stage, low-pressure centrifugal pump in in-line design with
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Motor with one-piece shaft
Scope of delivery
- Pump
- Installation and operating instructions
Options
- ...-H4 variant with PN 6/10 flanges (at additional charge)
- ...-H5 variant with PN 16 housing (at additional charge)
- Other voltages and frequencies as well as ATEX approval on request
Accessories
- Mounting brackets for installation on a base
- PTC thermistor sensor, PTC resistor tripping relay
- Special motors
- Special mechanical seals
- SC-HVAC, CC-HVAC control systems and switchgears