Wilo-Initial Drain | Wilo

Wilo-Initial Drain

Wilo-Initial Drain

Ειδικά χαρακτηριστικά/πλεονεκτήματα προϊόντος

Εύκολη εγκατάσταση σε στενά φρεάτια λόγω κόμπακτ σχεδιασμού και μικρού βάρους
Ασφάλεια λειτουργίας χάρη στην αυτόματη επιτήρηση κινητήρα
Εύκολη λειτουργία λόγω του εγκατεστημένου πλωτηροδιακόπτη

Προτεινόμενες υπηρεσίες σέρβις

Σχεδιασμός

Submersible pump for fully automatic operation in portable wet well installation.

Υγρά

For the pumping in domestic areas of wastewater with small amounts of sand and gravel.

Εξοπλισμός/λειτουργία

Self-switching thermal motor monitoring
Integrated capacitor
Fitted float switch

Κωδικοποίηση τύπου

Example	Wilo-Initial DRAIN 10-7/522/AEF-10M
Initial	Series
Drain	Wastewater pump
10	Nominal flow in m³/h
7	Nominal head in m
5	Mains frequency: 5 = 50 Hz 6 = 60 Hz
22	Rated voltage: 22 = 1~220 V 23 = 1~230 V
A	With float and plug
EF	Plug type: EF = CEE7/7 B = type B I = type I M = type M
10 M	Cable length

Tεχνικά στοιχεία

Mains connection (depending on product type):
- 1~230 V, 50 Hz
- 1~220 V,50 Hz
- 1~220 V,60 Hz
Submerged operating mode: S1
Non-immersed operating mode: S3 25%
Protection class: IP68
Insulation class: F
Fluid temperature: 3 ... +40 °C (37 ... 104 °F)

Υλικά

Hydraulics housing: PP
Impeller: PA6-GF30
Motor housing: 1.0038 (steel)
Seal:
- Pump/motor: NBR
- Static: NBR
Shaft end: 1.4005 (AISI 416)

Σχεδιασμός

Wastewater pump with vortex impeller and vertical threaded connection (hose connection enclosed). Pump housing and impeller made of composite material. 1~ motor with integrated operating capacitor, self-switching thermal motor monitoring, and basic sealing with a rotary shaft seal. Motor housing made of steel. Connection cable with float switch and fitted plug (depending on product type):

Type E (CEE 7/5) or type F (CEE 7/3)
Type I
Type B
Type M

Περιεχόμενο παράδοσης

Pump
Hose connection Ø 24/32 mm, enclosed
Installation and operating instructions

Οδηγίες εγκατάστασης και λειτουργίας