Cooling shroud for 4" submersible pumps.
Article number: 4064430
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Cooling shroud for 4" submersible pumps. |
| Article number | 4064430 |
| EAN number | 3517280259228 |
| Colour | Silver |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-01-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 510 mm |
| Length L | 500 mm |
| Height with packaging | 155 mm |
| Height H | 130 mm |
| Width with packaging | 155 mm |
| Width W | 130 mm |
| Gross weight, approx. m | 3 kg |
| Net weight, approx. m | 2 kg |
Submersible-motor pumps can be equipped with a cooling jacket pipe to achieve the flow velocity necessary for motor cooling.
This is recommended especially if:
- Sludge deposits could form on the motor (e.g., for application in a pump sump immediately above ground)
- Improved motor cooling is required because of unusual operating conditions
- No unperforated well casing is present in the well, and the pump must be installed in the filtration pipe network
- Sand appears in the well
- Installation takes place in rock springs without pipe networks
Scope of delivery
- Cooling jacket pipe
- Spacer
- Spacing ring
- Screw clamps
| Ordering information | |
|---|---|
| Net weight, approx. | 2 kg |
| Make | Wilo |
| Item no. | 4064430 |
| Length L | 500 mm |
| Height H | 130 mm |
| Width W | 130 mm |
Installation and operating instructions
Cooling shrouds 3"& 4"
| Article Number | 6087927 |
| Edition | 2021-02 |
| Number of pages | 8 |
PDF (5 MB)