Motor cable for drinking water 3 inch motor | Wilo

Motor cable for drinking water 3 inch motor

Downloads

Certificate REACH (Documents)

REACH regulation

Edition 2021-10
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (162 KB)
Product list
Product descriptionDescriptionacc_desc_with_no_headlineArticle number
Motor cable for drinking water 3" motor, 4 x 1.5mm², 30 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

30 m

6080525
Motor cable for drinking water 3" motor, 4 x 1.5mm², 40 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

40 m

6080526
Motor cable for drinking water 3" motor, 4 x 1.5mm², 50 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

50 m

6080527
Motor cable for drinking water 3" motor, 4 x 1.5mm², 60 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

60 m

6080528
Motor cable for drinking water 3" motor, 4 x 1.5mm², 10 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

10 m

6080529
Motor cable for drinking water 3" motor, 4 x 1.5mm², 20 m

Kit with improved corrosion protection (stainless steel cable connector, extended insulation) for replacing the existing connection cable on the motor. Comprising 4 x 1.5 mm² flat cable with connector on the motor side and bare cable end on the switchbox end. Cable set is factory-wired. Suitable for 1~230 V and 3~400 V. Suitable for use in drinking water. Only intended for use in pumps TWU 3-...HS-B!

20 m

6080530