DrainLift BOX-40/11D O
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 1 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Sound-pressure level | 65 dB |
| Switching volume V | 27 l |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Rated current IN | 4.1 A |
| Protection class | IP68 |
| Phase | 1 |
| Rated speed n | 2900 1/min |
| Number of poles | 2 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 30 1/h |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 930 W |
| Operating mode (non-immersed) | S3-20% |
| Insulation class | F |
| Materials | |
|---|---|
| Pump housing | Grey cast iron |
| Impeller | PK-GF30 |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | - |
| Pipe connection on the discharge side DNd | G 1½ |
DrainLift Box 32/8 O; 32/11 O; 40/11 O
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift BOX-40/11D O |
| Article number | 6093966 |
| EAN number | 4062679241296 |
| Colour | Black |
| Minimum order quantity | 1 |
| Date of sales availability | 2022-08-01 |
| Packaging | |
|---|---|
| Packaging type | Euro pallet |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1200 mm |
| Length L | 730 mm |
| Height with packaging | 1200 mm |
| Height H | 880 mm |
| Width with packaging | 800 mm |
| Width W | 720 mm |
| Gross weight, approx. m | 67 kg |
| Net weight, approx. m | 45 kg |
Compact and fully-automatic sewage lifting unit for floor-mounted installation within buildings.
Fluid
For collection and pumping of the following in domestic areas:
- Sewage not containing faeces
Sewage pumping according to 12050
The sewage lifting unit meets the requirements of EN 12050-2.
Construction
Gas-tight and watertight collection reservoir made from plastic, with deposit-free interior. Two DN 100 connections at a 180° angle to each other for the inlet as well as venting and cable routing. The discharge connection is located at a 90° angle to the other two connections. For easy maintenance of the unit, the cover serves as an inspection opening.
Sewage pump with vortex impeller and vertical threaded connection. Hydraulics housing made of grey cast iron, impeller made of plastic. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Detachable connection cable with float switch and fitted plug (CEE 7/7).
The level control takes place via the float switch attached to the pump. The “pump on/off” switching level is determined by the cable length of the float switch.
Scope of delivery
- Plastic chamber with installed pipework
- Pipework with non-return valve and Y-piece
- Two pumps with float switch and plug
- Pressure hose (inside diameter: 40 mm/1.5 in; length: 7 cm/2.8 in) incl. hose clips
- O-ring to seal tank cover and as anti-syphon trap
- Tank cover (cover plug)
- Fixation material for buoyancy safeguards
- Installation and operating instructions
| Operating Data |
|---|
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 3 min. T | 40 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 1 bar |
| Max. permissible pressure in the pressure pipe P | 1.7 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 113 l |
| Switching volume V | 27 l |
| Operating mode (non-immersed) | S3-20% |
| Height H | 880 mm |
| Length L | 730 mm |
| Width W | 720 mm |
| Diagonal dimension Diagonal axis | 730 mm |
| Motor data | |
|---|---|
| Mains connection | 1~230 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 0.6 kW |
| Rated speed n | 2900 1/min |
| Rated current IN | 4.1 A |
| Insulation class | F |
| Protection class motor | IP68 |
| Cable | |
|---|---|
| Connection cable length L | 5 m |
| Cable type | H07RN-F |
| Cable cross-section | 3G1 mm² |
| Mains plug | CEE 7/7 (Schuko) |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | Grey cast iron |
| Impeller | PK-GF30 |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side | Ø 110 |
| Pipe connection on the discharge side | Ø 40 |
| Connection venting | Ø 110 |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift BOX-40/11D O |
| Net weight, approx. m | 45 kg |
| Article number | 6093966 |
Installation and operating instructions
Wilo-DrainLift BOX
| Article Number | 2521833 |
| Edition | 2022-10 |
| Number of pages | 32 |
PDF (6 MB)Wilo-DrainLift BOX
| Article Number | 6094301 |
| Edition | 2022-10 |
| Number of pages | 52 |
PDF (6 MB)Mains-independent alarm signal (3) | ||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | ||
Stationary dry well installation (1) | ||
Float switch for detecting the fill level for the alarm function. Fixation with threaded bar (Rp 3/8") and counter nut. Material
Technical data
Connection
| ||
Fittings (4) | ||
Shut-off ball cock for switching between 2 circuits:
| ||
Non-return valve for automatic closing of the pressure pipe to prevent loss of pressure and consequent pressure surges.
| ||
Gate valve in bushing version with female thread and handwheel for shutting off the pipe network. | ||
Ball valve with lever for easy and safe installation. Certified suitability in accordance with CE for drinking water applications (e.g. in accordance with DIN 1988). Ball valves DVGW-certified up to Rp 2. Scope of delivery
| ||
Installation/setup (2) | ||
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point. | ||
Collar for securing the baseplate against pressing ground water, with corrosion-resistant clamps. | ||
Alarm signal (10) | |||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Flash light 24 VDC | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Level control (10) | |||
Float switch for detecting the fill level for the alarm function. Fixation with threaded bar (Rp 3/8") and counter nut. Material
Technical data
Connection
| |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Commissioning | Commissioning Lifting stations (Double pump) | 2219413 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Maintenance | Maintenance BASIC Lifting stations (Double pump) | 2219542 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Lifting stations (Double pump) | 2219516 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Lifting stations (Double pump) | 2219569 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||