Wilo-Isar MODH1-1
Efficient compact systems for drinking water applications.
Efficient compact systems for drinking water applications.
The Wilo-Isar MODH1 is a pressure-boosting system with multistage, horizontal fix speed pumps, which is suitable for water supply and boosting in small commercial buildings thanks to its compact, space saving design. Its modular construction can be fitted optionally with one, two or three pumps of the type Wilo-Medana CH1-L. Components with fluid contact are also suitable for drinking water applications. Flexible connections, its small space, its service-friendly hydraulic components and the Easy Controller make installation, commissioning and maintenance very easy.
Recommended services
Your advantages
- High operational reliability, thanks to system with one, two or three horizontal multistage CH1-L pumps with stainless steel hydraulics
- Easy installation and maintenance thanks to special, flexibly adjustable connections to manifolds
- Easy commissioning and operation with the Easy Controller
- Drinking water approval (ACS and KTW) for pumps with components made of stainless steel that come into contact with the fluid
Design
Pressure-boosting system with one non-self-priming stainless steel high-pressure multistage centrifugal pump
Application
- Fully automatic water supply and pressure boosting in inlet mode, either from the public water supply network or from a tank, for domestic, commercial, industrial and municipal applications (e.g. residential, office, administration buildings, hotels, hospitals, trades, industry, water supply companies).
- Pumping drinking water, process water, cooling water or other industrial water, which does not affect the materials used, neither chemically nor mechanically, and does not have any abrasive or long-fibre constituents
Equipment/function
- 1 CH1-L pump per system
- Components that come in contact with the fluid are corrosion-resistant
- Electrogalvanised base frame with height-adjustable vibration absorbers for insulation against structure-borne noise
- Stop valve on every pump on the suction and discharge sides
- Non-return valve, on the discharge side
- Pressure sensor, on the discharge side
- Pressure gauge optional, on the suction side
- Pressure gauge, on the discharge side
- Low-water cut-out switchgear, optional
- EC-control with IP54 plastic housing, consisting of an internal power supply unit, microprocessor, analogue and digital input and output modules
Typekey
Example: | Wilo-Isar MODH1-1CH1-L-202/EC |
Wilo | Brand |
Isar | Multistage booster |
MOD | Commercial series |
H | Pressure-boosting system with horizontal pumps |
1 | Product level (1 = entry, 3 = standard, 5 = premium) |
1 | Number of pumps |
CH1-L | Pump series |
2 | Rated volume flow [m3/h] of the single pump |
02 | Number of single pump stages |
Technical data
- 3~400 V ± 10 %, 50 Hz; 3~380/440 V ±10 %, 60 Hz mains connection, depending on type also 1~230 V, 50/60 Hz (other versions on request)
- Max. fluid temperature 50 °C (70 °C optional)
- Max. ambient temperature 40 °C
- Operating pressure 10 bar
- Inlet pressure 6 bar
- Nominal connection diameter, on the discharge side R 2"/DN 100
- Nominal connection diameter, on the inlet side R 2"/DN 100
- Protection class IP54
- Fuse protection on mains side A, AC 3 according to motor power and EVU regulations
- Approved fluids (other fluids on request). Approved fluids are generally waters which do not attack the materials used, neither chemically nor mechanically, and do not contain any abrasive or long-fibre constituents.
- Cooling water
- Drinking and process water
Materials
Single pump:
- Impellers, stage chambers and pump housing made of stainless steel 1.4301/1.4404
- Shaft of stainless steel 1.4404
- EPDM gasket (EP851)/FKM (Viton)
- Mechanical seal made of tungsten carbide/carbon
- Bearing of tungsten carbide
- Pump support foot made of aluminium
Construction
- Base frame: electrogalvanised and with height-adjustable vibration absorbers for comprehensive insulation against structure-borne noise; other versions on request
- Pipework: complete pipework made of stainless steel, suitable for the connection of all piping materials used in building services; the pipework dimensions must correspond to the overall hydraulic performance of the pressure-boosting system
- Pump: One pump from the CH1-L series 2.., 4.., 6.., 10.., 16..; all pump components that come in contact with the fluid are made of 1.4301/1.4404 stainless steel
- Valves: each pump is equipped on the suction and discharge side with a stop valve or with annular shut-off valves and a discharge-side non-return valve
- Diaphragm pressure vessel: 8 l/PN 10 on the discharge side with butyl rubber diaphragm, completely safe according to the food safety regulations; ball valve and drain and throughflow fitting according to DIN 4807 for test and inspection purposes
- Pressure sensor: 4 to 20 mA, on the discharge side for activating the central EC-controller
- Pressure indication: Pressure gauge (ø 63 mm) on the discharge side; additional digital display of the discharge pressure in the alphanumeric display of the EC-controller
- Controller: the system is standard-equipped with an EC-controller
Scope of delivery
- factory-mounted, ready for connection pressure-boosting system checked for functionality and impermeability
- Installation and operating instructions
Options
Other mains connections on request