Rexa CUT GI03.41/S-T25-2-540 | Wilo

Rexa CUT GI03.41/S-T25-2-540

Technical data
Tender text

Fully submersible sewage pump with internal macerator for vertical wet well installation for pumping wastewater and sewage containing faeces (in the scope of validity of EN 12050-1), also with long-fibre components. Hydraulics housing and impeller made of cast iron, motor housing made of stainless steel, seal made of two independent mechanical seals on pump and motor sides. Pressure connection with horizontal discharge port and thread/flange connection. Surface-cooled motor in three-phase current version with thermal motor monitoring and sealing chamber. Connection cable with bare cable end.

Operating data
Fluid media
Water
Max. delivery head H
41 m
Product data
Impeller type
Single-channel impeller with macerator
Maximum operating pressure PN
5 bar
Max. immersion depth
20 m
Fluid temperature T
3 °C
Motor data
Motor design
Submersible motor – air-cooled
Mains connection
3~400 V, 50 Hz
Voltage tolerance
±10 %
Power factor cos φ
0.84
Rated power P2
2.5 kW
Power consumption P1 max
3.20 kW
Rated current IN
5.5 A
Starting current I
31 A
Activation type
Direct online (DOL)
Number of poles
2
Rated speed n
2848 1/min
Max. switching frequency t
60 1/h
Insulation class
F
Protection class
IP68
Operating mode (immersed)
S1
Operating mode (non-immersed)
S2-15 min
Cable
Connection cable length
10 m
Cable type
H07RN-F
Cable cross-section
6G1 mm²
Mains plug
no
Type of connection cable
Detachable
Equipment/function
Float switch
no
Macerator
yes
Explosion protection type
-
Motor protection
Bimetallic
Motor, leakage detection
no
Sealing chamber, leakage detection
optional
Leakage chamber, leakage detection
no
Materials
Pump housing
Cast iron
Macerator
Stainless steel
Impeller
Cast iron
Shaft
Stainless steel
Sealing on pump side
QQPGG
Sealing on motor side
BXPFF
Gasket material
NBR
Motor housing
Stainless steel
Installation dimensions
Pipe connection on the suction side DNs
-
Pipe connection on the pressure side DNd
DN 32/40, Rp 1¼
Information for order placements
Brand
Wilo
Product description
Rexa CUT GI03.41/S-T25-2-540
Net weight, approx. m
36 kg
Article number
6080486
Downloads

Installation and operating instructions

Wilo-Rexa CUT GI

Article Number 6069820
Edition 2019-02
Page format 209.9 x 297.0 mm
Number of pages 32
PDF (3 MB)

Certificate REACH (Documents)

REACH regulation

Edition 2020-08
Page format 209.9 x 297.0 mm
Number of pages 2
PDF (158 KB)
BIM/CAD

Rexa CUT GI03.41/S-T25-2-540

DWG (598 KB)

Rexa CUT GI03.41/S-T25-2-540

STP (691 KB)

Rexa CUT GI03.41/S-T25-2-540

Number of pages
DWG (15 KB)

Rexa CUT GI03.41/S-T25-2-540

Number of pages
DWG (17 KB)

Rexa CUT GI03.41/S-T25-2-540

Number of pages
DWG (18 KB)