Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-Rexa UNI | Wilo

Wilo-Rexa UNI

For the sewage disposal of small commercially used buildings.

Your advantages
Wilo-Rexa UNI

For the sewage disposal of small commercially used buildings.

The Wilo-Rexa UNI is suitable as an entry level model for smaller commercial buildings for sewage disposal (according to EN 12050-1). For this purpose, the pump can be used in a wide variety of applications, whether portable or in the pump chamber as a Wilo system solution. The new vortex hydraulics with corrosion-resistant composite and a smooth surface provide high reliability and allow the pump to be used universally with various fluids. Installation is very easy due to the low weight, the capacitor integrated in the single-phase motor and the fixings integrated in the flange. Maintenance is very easy thanks to direct access to the most important components. Due to double gaskets and the large sealing chamber, maintenance intervals can be increased. Wilo-Rexa UNI can be controlled via Wilo-Control switchgears and integrated into existing building management systems. With the Wilo-Rexa UNI, Wilo again proves its innovative leadership and underscores its system expertise by integrating single pumps, pump chambers and controls into higher-level systems.


Your advantages

  • Excellent reliability due to corrosion-free hydraulics for universal application and various fluids
  • Easy installation thanks to its light weight, integrated capacitor at the single-phase motor and flange with integrated fixation
  • Optimum efficiency and operational safety thanks to its vortex hydraulics and smooth surfaces
  • Quick maintenance facilitated by direct access to the sealing chamber and pump housing
  • Long maintenance interval thanks to its double seal and a high volume sealing chamber
Series description
Wilo-Rexa UNI

Design

Submersible pump for stationary and portable wet well installation in intermittent operation.

Liquid

For pumping in commercial areas of:

  • Sewage containing faeces
  • Wastewater (with small amounts of sand and gravel)
  • Wastewater, slightly acidic with a pH value > 4.5
  • The Rexa UNI submersible pumps … B/ and Rexa UNI … K/ are additionally suitable for pumping of:
    • Lake- and seawater NaCl content (common salt): max. 30 g/l up to 20 °C
    • Swimming pool water, max. chloride content: 400 mg/l
    • Wastewater, slightly acidic with a pH value of > 3.5

Sewage pumping according to (DIN) EN 12050

The pumps meet the requirements of EN 12050-1.

Equipment/function

  • Thermal motor monitoring with bimetallic strip
  • Single-phase AC motor with self-switching thermal motor monitoring
  • Single-phase AC motor with integrated capacitor
  • Three-phase AC motor with motor protection plug (version P and A)
  • Attached float switch (version A)

Typekey

Example:

Wilo-Rexa UNI V05B/T06-540/P

Rexa

Submersible sewage pump

UNI

Series

V

Vortex impeller

05

Nominal diameter of pressure connection

  • 05 = DN 50
  • 06 = DN 50/65

B

Version:

  • None = standard version
  • B = V4A version
  • K = version in V4A and with cooling shroud

T

Mains connection version:

  • M = 1~
  • T = 3~

06

/10 = rated power P in kW

5

Mains connection frequency: 5 = 50 Hz, 6 = 60 Hz

40

Rated voltage code

A

Additional electrical equipment:

  • Without = with bare cable end
  • P = with plug
  • A = with float switch and plug

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Non-immersed operating mode:
    • Rexa UNI …: S2-15 min; S3 10%
    • Rexa UNI … B/ …:S2-15 min; S3 10%
    • Rexa UNI … K/ …:S1
  • Protection class: IP68
  • Insulation class: F
  • Fluid temperature: 3 … 40 °C (37 … 104 °F)
  • Fluid temperature, max.: 60 °C (140 °F) for 3 min

Materials

Wilo-Rexa UNI V05 ...

  • Hydraulics housing: PP-GF30
  • Impeller: PP-GF30
  • Motor housing: 1.4301 (AISI 304)
  • Cooling shroud: −
  • Shaft end: 1.4401 (AISI 316)
  • Seal on the pump side: SiC/SiC
  • Seal on the motor side: C/Cr
  • Static seal: NBR (nitrile)

Wilo-Rexa UNI V05 ... B/ ...

  • Hydraulics housing: PP-GF30
  • Impeller: PP-GF30
  • Motor housing: 1.4401 (AISI 316)
  • Cooling shroud: −
  • Shaft end: 1.4401 (AISI 316)
  • Seal on the pump side: SiC/SiC
  • Seal on the motor side: C/Cr
  • Static seal: NBR (nitrile)

Wilo-Rexa UNI V06 ...

  • Hydraulics housing: PP-GF30
  • Impeller: PP-GF30
  • Motor housing: 1.4301 (AISI 304)
  • Cooling shroud: −
  • Shaft end: 1.4401 (AISI 316)
  • Seal on the pump side: SiC/SiC
  • Seal on the motor side: C/Cr
  • Static seal: NBR (nitrile)

Wilo-Rexa UNI V06 ... B/ ...

  • Hydraulics housing: PP-GF30
  • Impeller: PP-GF30
  • Motor housing: 1.4401 (AISI 316)
  • Cooling shroud: −
  • Shaft end: 1.4401 (AISI 316)
  • Seal on the pump side: SiC/SiC
  • Seal on the motor side: C/Cr
  • Static seal: NBR (nitrile)

Wilo-Rexa UNI V06 ... K/ ...

  • Hydraulics housing: PP-GF30
  • Impeller: PP-GF30
  • Motor housing: 1.4401 (AISI 316)
  • Cooling jacket: 1.4401 (AISI 316)
  • Shaft end: 1.4401 (AISI 316)
  • Seal on the pump side: SiC/SiC
  • Seal on the motor side: C/Cr
  • Static seal: NBR (nitrile)

Construction

Rexa UNI V … /M …/P

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with fitted shockproof plug.

Rexa UNI V … /M …/A and Rexa UNI V … B/M …/A

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with float switch and fitted shockproof plug.

Rexa UNI V … K/M …/A

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling shroud made of stainless steel. Detachable connection cable with float switch and fitted shockproof plug.

Rexa UNI V … /T …/A

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with CEE plug. Float switch and thermal motor monitoring connected to the CEE plug.

Rexa UNI V … /T … and Rexa UNI V … B/T …

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with bare cable ends.

Rexa UNI V … K/T …

Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. 3~ motor (jacket cooling) with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling shroud made of stainless steel. Detachable connection cable with bare cable ends.

Scope of delivery

  • Pump
  • Installation and operating instructions

Accessories

  • Connection cable with fixed cable lengths:
    • 1~ motor: up to max. 30 m (98 ft).
    • 3~ motor: up to max. 50 m (164 ft).
  • Suspension unit for wet well installation
  • Level control devices
  • Fixation accessories and chains
  • Switchgear, relays and plugs
Documents

Installation and operating instructions

Wilo-Rexa UNI

Article Number 6082109
Edition 2019-02
Number of pages 32
Language en
PDF (3 MB)

General overview

General Overview 2024 - International version

Edition 2024
Number of pages 74
Language en
PDF (33 MB)

Certification booklet

Wilo-Rexa UNI

Article Number 6082102
Edition 2022-08
Number of pages 16
Language language neutral
PDF (7 MB)
Product selection
Number of results: 38
Product descriptionDischarge portRated power P2Connection cable length LMains connectionArticle number
Rexa UNI-V05A/M004-523/A
DN 50
0.37 kW
10 m
1~230 V, 50 Hz
6097101
Rexa UNI-V05A/M004-523/P
DN 50
0.37 kW
10 m
1~230 V, 50 Hz
6097100
Rexa UNI-V05A/M006-523/A
DN 50
0.55 kW
10 m
1~230 V, 50 Hz
6097105
Rexa UNI-V05A/M006-523/P
DN 50
0.55 kW
10 m
1~230 V, 50 Hz
6097104
Rexa UNI-V05A/M008-523/A
DN 50
0.75 kW
10 m
1~230 V, 50 Hz
6097109
Rexa UNI-V05A/M008-523/P
DN 50
0.75 kW
10 m
1~230 V, 50 Hz
6097108
Rexa UNI-V05A/T004-540/A
DN 50
0.37 kW
10 m
3~400 V, 50 Hz
6097102
Rexa UNI-V05A/T004-540/O
DN 50
0.37 kW
10 m
3~400 V, 50 Hz
6097103
Rexa UNI-V05A/T006-540/A
DN 50
0.55 kW
10 m
3~400 V, 50 Hz
6097106
Rexa UNI-V05A/T006-540/O
DN 50
0.55 kW
10 m
3~400 V, 50 Hz
6097107
Rexa UNI-V05A/T008-540/A
DN 50
0.75 kW
10 m
3~400 V, 50 Hz
6097110
Rexa UNI-V05A/T008-540/O
DN 50
0.75 kW
10 m
3~400 V, 50 Hz
6097111
Rexa UNI-V05B/M004-523/A
DN 50
0.37 kW
10 m
1~230 V, 50 Hz
6097112
Rexa UNI-V05B/M006-523/A
DN 50
0.55 kW
10 m
1~230 V, 50 Hz
6097114
Rexa UNI-V05B/M008-523/A
DN 50
0.75 kW
10 m
1~230 V, 50 Hz
6097116
Rexa UNI-V05B/T004-540/O
DN 50
0.37 kW
10 m
3~400 V, 50 Hz
6097113
Rexa UNI-V05B/T006-540/O
DN 50
0.55 kW
10 m
3~400 V, 50 Hz
6097115
Rexa UNI-V05B/T008-540/O
DN 50
0.75 kW
10 m
3~400 V, 50 Hz
6097117
Rexa UNI-V06A/M011-523/A
DN 65
1.1 kW
10 m
1~230 V, 50 Hz
6096645
Rexa UNI-V06A/M011-523/P
DN 65
1.1 kW
10 m
1~230 V, 50 Hz
6096646
Rexa UNI-V06A/M015-523/A
DN 65
1.5 kW
10 m
1~230 V, 50 Hz
6096649
Rexa UNI-V06A/M015-523/P
DN 65
1.5 kW
10 m
1~230 V, 50 Hz
6096650
Rexa UNI-V06A/T011-540
DN 65
1.1 kW
10 m
3~400 V, 50 Hz
6096647
Rexa UNI-V06A/T011-540/A
DN 65
1.1 kW
10 m
3~400 V, 50 Hz
6096644
Rexa UNI-V06A/T015-540
DN 65
1.5 kW
10 m
3~400 V, 50 Hz
6096651
Rexa UNI-V06A/T015-540/A
DN 65
1.5 kW
10 m
3~400 V, 50 Hz
6096648
Rexa UNI-V06A/T025-540
DN 65
2.5 kW
10 m
3~400 V, 50 Hz
6097120
Rexa UNI-V06A/T025-540/A
DN 65
2.5 kW
10 m
3~400 V, 50 Hz
6096652
Rexa UNI-V06B/M011-523/A
DN 65
1.1 kW
10 m
1~230 V, 50 Hz
6096653
Rexa UNI-V06B/M015-523/A
DN 65
1.5 kW
10 m
1~230 V, 50 Hz
6096655
Rexa UNI-V06B/T011-540
DN 65
1.1 kW
10 m
3~400 V, 50 Hz
6096654
Rexa UNI-V06B/T015-540
DN 65
1.5 kW
10 m
3~400 V, 50 Hz
6096656
Rexa UNI-V06B/T025-540
DN 65
2.5 kW
10 m
3~400 V, 50 Hz
6096657
Rexa UNI-V06K/M011-523/A
DN 65
1.1 kW
10 m
1~230 V, 50 Hz
6096658
Rexa UNI-V06K/M015-523/A
DN 65
1.5 kW
10 m
1~230 V, 50 Hz
6096660
Rexa UNI-V06K/T011-540
DN 65
1.1 kW
10 m
3~400 V, 50 Hz
6096659
Rexa UNI-V06K/T015-540
DN 65
1.5 kW
10 m
3~400 V, 50 Hz
6096661
Rexa UNI-V06K/T025-540
DN 65
2.5 kW
10 m
3~400 V, 50 Hz
6096662