Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Wilo-Sub TWI 10 | Wilo
Your advantages
Wilo-Sub TWI 10

Your advantages

  • Energy-efficient, optimised hydraulics with efficiency of up to 80 %
  • Long service life thanks to corrosion-resistant stainless steel, optionally in V4A quality
  • ACS certified for drinking water applications
  • High range of performance from 1 to 250 m³/h
  • A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
Series description
Wilo-Sub TWI 10

Design

Multistage 10" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering of the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents

Equipment/function

  • Multistage submersible pump with semi-axial impellers
  • Integrated non-return valve, spring-loaded
  • NEMA coupling up to 8" motor connection, standardised connection for 10" motor and larger
  • Three-phase current motor
  • Hermetically sealed motors
  • Rewindable motors

Typekey

NO VALUE

Technical data

  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature:
    • Hermetically cast motors: 3-20 °C or 3-30 °C (depending on type)
    • Rewindable motors: 3-30 °C (depending on type)
  • Minimum flow rate at motor: 0.1-0.5 m/s (depending on type)
  • Max. sand content: 50 g/m3
  • Max. number of starts: 10-20/h (depending on type)
  • Max. immersion depth: 100 – 350 m (depends on type)
  • Protection class: IP68
  • Pressure connection: Rp 6

Materials

  • Hydraulics housing: Stainless steel 1.4301
  • Impellers: Stainless steel 1.4301
  • Hydraulic shaft: Stainless steel 1.4057
  • Motor housing: EN-GJL or stainless steel 1.4301
  • Motor shaft: Stainless steel 1.4542 or 1.4462 (depending on type)

Construction

Submersible pump with ACS approval for vertical or horizontal installation.

Hydraulics

Multistage submersible-motor pump with 6/8"-NEMA- or from 10" and larger with standardised connection and semi-axial impellers in sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.

Motor

Three-phase motor for direct or star-delta start. Sealed, hermetically cast motor, resin-impregnated, with enamel-insulated winding or rewindable motor with PVC-insulated winding, self-lubricating bearing, with water-glycol filling. Motors of the NU 611, NU 8..., NU 9... series are also available in drinking water version (T version).

Cooling

The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.

Pressure shroud

The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.

Scope of delivery

  • Hydraulics + motor completely assembled
  • Connection cable approved for drinking water, cable cross-section and length per standard design or per customer request
  • Installation and operating instructions

Options

  • Hydraulics in stainless steel 1.4401
  • Motor in stainless steel 1.4401, 1.4571 or G-CuSn10
  • 60 Hz version
  • Star-delta starting
  • Rewindable motor
  • Rewindable motor with drinking water filling as special version

Accessories

  • Cooling shrouds
  • Pressure shroud
  • Cable kits for drinking water and process water
  • Switchgears
Documents

Installation and operating instructions

Submersible motor pump - motor pre-filled

Article Number 6094322
Edition 2007-05
Number of pages 72
PDF (1 MB)

Submersible motor pump - motor non-filled

Article Number 6094323
Edition 2007-05
Number of pages 72
PDF (1 MB)

Submersible motor pump in booster shroud - motor pre-filled

Article Number 6094324
Edition 2007-05
Number of pages 60
PDF (922 KB)

Submersible motor pump in booster shroud - motor non-filled

Article Number 6094325
Edition 2007-05
Number of pages 68
PDF (1 MB)

General overview

General Overview 2024 - International version

Edition 2022
Number of pages 74
PDF (33 MB)

Certification booklet

Wilo-Sub TWI 4, Wilo-Sub TWI 6/TWI 06, Wilo-Sub TWI 8/TWI 08, Wilo-Sub TWI 010

Article Number 6080451
Edition 2022-02
Number of pages 24
PDF (4 MB)

Certificate REACH

Group Statement REACH

Edition 2021-05
Number of pages 4
PDF (276 KB)

CE

CE 2156030-03

Number of pages 6
PDF (271 KB)

CE 2156031-03

Number of pages 6
PDF (224 KB)