Connect module Yonos MAXO | Pump control/interface module

Number of results: [1]

Product description	Description	Article number
Wilo-Connect module Yonos MAXO	Wilo-Connect module Yonos MAXO for single and twin-head pumps. Retrofittable plug-in module for Wilo-Yonos MAXO/Yonos MAXO-D/Yonos MAXO-Z pump types. The Connect module Yonos MAXO is installed on the electronic module of the pump at the position of the Wilo plug. With SBM run signal, overriding Off control input (Ext.Off) and main/standby operation with runtime-dependent switchover from main to standby pump	2210108

Product features

Equipment/function

Run signal display
SSM collective fault signal as potential-free NC contact
SBM collective run signal as potential-free NO contact
Overriding Off control input (External Off)
Integrated dual pump management with the functions:
- Main/standby operation with runtime-dependent (24 h) switchover from main to standby pump
- Fault-sensitive switchover to operational standby pump

Mains terminals

Terminal cross-section: max. 2.5 mm2

Signal terminals

Max. switching capacity: 250 V/1 A

Terminal cross-section: max. 1.5 mm2

Control terminal Ext. Off

Contact rating: 24 V DC, 10 mA

Terminal cross-section: min. 0.75 mm2, max. 1.5 mm2

Scope of delivery

Wilo-Connect module Yonos MAXO

2 fastening screws for cover installation

4 threaded cable glands M16

Installation and operating instructions

Create your own product datasheet

Create your personal catalogue with selected products and accessories