Port 800 | Pump chamber | Wilo

Port 800

Pump chamber

Trafficable – including for heavy-duty vehicles – due to chamber covers that can be mounted directly on the chamber
A continuously variable pump chamber extension of up to 2.75 m allows for flexible adjustment during the installation phase
One-piece chamber body up to 2.25 m offers maximum operational reliability and protection against leakage
The use of corrosion-free materials ensures a long service life
Surface coupling allows for easy maintenance with readily accessible valves
Light polyethylene chamber body and integrated inlet connections enable an easy installation
Circumferential chamber ribs make the chamber body anti-buoyant without additional ballast

Pressure Drainage System - Aerial view and system analysis

Pumping station for a detached house with Wilo-Rexa MINI3-S

Wilo-Port 800

Smart networking for the Polish community Tczów.

Aerial view for pressure drainage system

Pressure Drainage System - Networking with Nexos Intelligence

Pressure Drainage System - System analysis with Nexos Intelligence

Pressure Drainage System - current situation

Pressure drainage system with Nexos Intelligence: smart networking for increased reliability and efficiency.

Number of results: [6]

For Wilo pumps

undefined [2]

undefined [4]

Product description	For Wilo pumps	Height without packaging H	Article number
Port 800.1-1750-03B	Rexa MINI3-S, Rexa FIT-S, Rexa PRO-S (max. 2,5 kW)	1750 mm	2543011
Port 800.1-2250-03B	Rexa MINI3-S, Rexa FIT-S, Rexa PRO-S (max. 2,5 kW)	2250 mm	2543014
Port 800.2-1750-03B	Rexa MINI3-S, Rexa FIT-S, Rexa PRO-S (max. 2,5 kW)	1750 mm	2544205
Port 800.2-1750-04D	Rexa MINI3	1750 mm	6094910
Port 800.2-2250-03B	Rexa MINI3-S, Rexa FIT-S, Rexa PRO-S (max. 2,5 kW)	2250 mm	2544206
Port 800.2-2250-04D	Rexa MINI3	2250 mm	6094909

Design

Pump chamber made of plastic for concealed floor installation

Application

Pumps sewage without faeces (version D) and with faeces (version B):

In cases where sewage cannot be led to the sewer system via a natural downward slope.
For the backflow resistant drainage in cases where the discharge point is below the backflow level.

Type key

Example:	Wilo-Port 800.1-1750-03B
800	Pump chamber diameter in mm
1	Number of pumps
1750	Monolithic over-all height in mm
03	Discharge outlet: 03 = R 1¼ 04 = R 1½
B	Version for Wilo pump B = Rexa MINI3-S, Rexa FIT-S, Rexa PRO-S, Rexa CUT D = Rexa MINI3

Technical data

Monolithic pump chamber heights: 1750, 2250 mm
Max. pump chamber height with extension: 2750 mm
Pump chamber diameter: 800 mm
Connection port (closed): 1x DN 100, 2x DN 150, 1x DN 200
Discharge outlet with male thread:
- Version “B” = R 1¼
- Version “D” = R 1½
Connection for flushing/vacuum relief valve: Rp 1

Materials

Pump chamber: PE
Pipework: Stainless steel
Cross member: Stainless steel
Gate valve: Red brass
Non-return ball valve: EN-GJL with corrosion-resistant powder coating
Surface coupling: EN-GJL with corrosion-resistant powder coating
Chain: Stainless steel

Construction

Ready-to-install plastic pump chamber in monolithic design without gasket surfaces with deposit-free pump chamber geometry and crane eyes for easy relocation and transport. Anti-buoyant against ground water up to the top edge of the ground without additional concrete weights provided by the customer. Complete pipework with surface coupling for quick and easy pump installation, a sleeve gate valve and a removable non-return ball valve. The non-return ball valve is installed directly on the discharge port of the pump. Includes pump chain as lifting equipment for the pump.

The pipework also offers additional connections for a flush connection and a vacuum relief valve. The chamber cover is available in classes A 15, B 125 and D 400.

Scope of delivery

Notice! Pump not included within the scope of delivery!

Configuration

Only install outside of buildings.
Do not install in the immediate vicinity of living and sleeping areas.
Do not install the pump chamber in peaty soils.
Max. height adjustment:
- with concrete rings: 200 mm
- with plastic pump chamber extension: 500 mm
Chamber cover D 400: customer must install a load distribution plate!
- The load distribution plate must rest fully on the substructure! The load distribution plate must not rest on the pump chamber.
- Dimensions: External Ø: 1700 mm; internal Ø: 700 mm; strength Ø: 300 mm
- Concrete quality: C 35/45; reinforcement: Reinforcing steel B500A
- Spacing: 150 mm lengthwise + crosswise, top + bottom