Drain LP 40/10 | Wilo

Drain LP 40/10

Technical data
Tender text

Self-priming drainage pump for the portable and stationary dry well installation for pumping clean and lightly contaminated water and sea water. Hydraulics with a horizontal suction connection and a vertical pressure connection and threaded connection. Vortex impellers are the impeller type used. Hydraulics made of plastic, impeller made of brass. Drive is provided by a single-phase version standard motor that features a motor housing made of aluminium. The connection cable must be provided by the customer. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.

Product data
Impeller type Open single-channel impeller
Free ball passage of the hydraulics 5 mm
Maximum operating pressure PN 7 bar
Fluid temperature T 3 °C
Motor data
Mains connection 1~230 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 0.4 kW
Power consumption P1 max 0.55 kW
Rated current IN 2.3 A
Activation type Direct online (DOL)
Rated speed n 2900 1/min
Max. switching frequency t 50 1/h
Insulation class B
Protection class IP44
Pump housing PP
Impeller Brass
Shaft Stainless steel
Shaft seal BXPFF
Gasket material NBR
Motor housing 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs Rp 1½
Pipe connection on the discharge side DNd Rp 1½
Ordering information
Brand Wilo
Product description Drain LP 40/10
Net weight, approx. m 12 kg
Article number 2047645

Installation and operating instructions

Wilo-Drain LP 40

Article Number 2048284
Edition 2009-04
Page format 209.9 x 297.0 mm
Number of pages 30
PDF (440 KB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)