Drain LPC 40/19
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 2 bar |
| Impeller type | Open multi-channel impeller |
| Free ball passage of the hydraulics | 6 mm |
| Max. volume flow Qmax | 20.0 m³/h |
| Max. delivery head Hmax | 20.5 m |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 80 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 1.1 kW |
| Rated current IN | 2.3 A |
| Rated speed n | 2881 1/min |
| Power consumption P1 max | 1310 W |
| Max. switching frequency t | 10 1/h |
| Activation type | Direct On Line (DOL) |
| Insulation class | F |
| Protection class motor | IP54 |
| Materials | |
|---|---|
| Pump housing | Aluminium |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Shaft seal | Q1Q1PGG |
| Gasket material | NBR |
| Motor housing | Aluminium |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | G 1½ |
| Pipe connection on the discharge side DNd | G 1½ |
Wilo-Drain LPC 40/19
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | Drain LPC 40/19 |
| Article number | 2081686 |
| EAN number | 4016322895947 |
| Colour | Green |
| Minimum order quantity | 1 |
| Date of sales availability | 2010-01-01 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 600 mm |
| Length L | 425 mm |
| Height with packaging | 540 mm |
| Height H | 274 mm |
| Width with packaging | 400 mm |
| Width W | 195 mm |
| Gross weight, approx. m | 26 kg |
| Net weight, approx. m | 23 kg |
Self-priming drainage pump for the transportable and stationary dry well installation for pumping clean and lightly contaminated water. Hydraulics with a horizontal suction connection and a vertical pressure connection and threaded connection and integrated non-return valve. A multi-channel impeller is used as the impeller. Hydraulics made of aluminium, impeller made of cast iron. Drive is provided by a three-phase current version standard motor that features a motor housing made of aluminium. The connection cable must be provided by the customer. The hydraulics and motor have a common shaft. Stable installation is carried out using a low-vibration baseplate.
| Operating Data |
|---|
| Product data | |
|---|---|
| Impeller type | Open multi-channel impeller |
| Free ball passage of the hydraulics | 6 mm |
| Maximum operating pressure PN | 2 bar |
| Fluid temperature T | 3 °C |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 1.1 kW |
| Power consumption P1 max | 1.31 kW |
| Rated current IN | 2.3 A |
| Activation type | Direct On Line (DOL) |
| Rated speed n | 2881 1/min |
| Max. switching frequency t | 10 1/h |
| Insulation class | F |
| Protection class | IP54 |
| Materials | |
|---|---|
| Pump housing | Aluminium |
| Impeller | Grey cast iron |
| Shaft | Stainless steel |
| Shaft seal | Q1Q1PGG |
| Gasket material | NBR |
| Motor housing | Aluminium |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side DNs | G 1½ |
| Pipe connection on the discharge side DNd | G 1½ |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | Drain LPC 40/19 |
| Net weight, approx. m | 23 kg |
| Article number | 2081686 |
Installation and operating instructions
Wilo-Drain LPC
| Article Number | 2081598 |
| Edition | 2007-07 |
| Number of pages | 24 |
PDF (1 MB)Certification booklet
Wilo-Drain LPC
| Article Number | 6080664 |
| Edition | 1605 |
| Number of pages | 4 |
PDF (221 KB)Level control with float switch (9) | |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Intermediate float switch with plug/coupling for level-dependent control of the connected consumer. | |||
Intermediate float switch with plug/coupling for level-dependent control of the connected consumer. | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Mains-independent alarm signal (3) | |||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Simple mains connection (3) | |||
Motor protection plug for connection to motors without thermal motor monitoring and leakage detection.
Technical data:
Attention: Switchgears are not protected against explosions and may be used only outside potentially explosive areas. | |||
Connection cable as material sold by the metre | |||
Connection cable as material sold by the metre | |||
Portable dry installation DN 40 (6) | |||
Hose nozzle with male thread to be screwed into the pressure connection for direct connection to the pressure hose, incl. fixation material. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 42 mm | 2027641 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Plastic hose as full set consisting of:
| |||
Plastic hose as full set consisting of:
| |||
Hoses / hose joints (16) | |||
Hose nozzle with female thread to be screwed into the pressure connection for direct connection to the pressure hose, incl. fixation material. | |||
Hose nozzle with male thread to be screwed into the pressure connection for direct connection to the pressure hose, incl. fixation material. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 20 m, Ø 90 mm | 2017193 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 30 m, Ø 90 mm | 2017194 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 10 m, Ø 110 mm | 2017196 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 20 m, Ø 110 mm | 2017197 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 30 m, Ø 110 mm | 2017198 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 10 m, Ø 60 mm | 2018106 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 42 mm | 2027641 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 5 m, Ø 42 mm | 2027642 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 15 m, Ø 42 mm | 2027643 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Synthetic pressure hose 3 m, Ø 60 mm | 2027644 | ||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Pressure hose for direct connection to the discharge ports with corresponding hose connection, incl. hose nozzle. | |||
Plastic hose as full set consisting of:
| |||
Plastic hose as full set consisting of:
| |||
Pump control (2) | |||
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers. For connection to the mains connection without neutral conductor (3~400 V) only! Functions
Equipment
Inputs
Outputs
Notice: Power supply must be provided by the customer! Scope of delivery
Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within potentially explosive atmospheres must be connected through an intrinsically safe circuit, e.g. breakdown barrier or Ex cut-off relay. The direct connection of pumps within potentially explosive atmospheres is not possible! | |||
Microprocessor-controlled switchgear for level-dependent control of two submersible pumps with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers. For connection to the mains connection without neutral conductor (3~400 V) only! Functions
Equipment
Inputs
Outputs
Notice: Power supply must be provided by the customer! Scope of delivery
Configuration Attention: Signal transmitters are to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within potentially explosive atmospheres must be connected through an intrinsically safe circuit, e.g. breakdown barrier or Ex cut-off relay. The direct connection of pumps within potentially explosive atmospheres is not possible! | |||
Pump control/accessories (1) | |||
Rechargeable battery to be installed in the switchgears Wilo-control MS-L and EC-L for a mains-independent alarm.
| |||
Alarm signal (10) | |||
Network-independent (accumulator-integrated) alarm system with a potential-free contact (NO contact) shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Network-independent (accumulator-integrated) alarm system with integrated shock-proof socket, the connected consumers of which are switched off when the alarm level is reached. Including shock-proof plug, acoustic alarm signal and attached mini-floater switch with 3 m cable for level measurement (cable can be extended on-site up to a maximum of 100 m. Recommended cable cross-section: 2x0.75 mm2). Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Flash light 24 VDC | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Cable (2) | |||
Connection cable as material sold by the metre | |||
Connection cable as material sold by the metre | |||
Level control (16) | |||
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF" When used in potentially explosive areas an Ex cut-off relay must be provided for the connection! | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Float switch WAO 65, 10 m cable | 2006027 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Float switch WAO 65, 20 m cable | 2004429 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up OFF, down ON | |||
Intermediate float switch with plug/coupling for level-dependent control of the connected consumer. | |||
Intermediate float switch with plug/coupling for level-dependent control of the connected consumer. | |||
Motor protection (1) | |||
Motor protection plug for connection to motors without thermal motor monitoring and leakage detection.
Technical data:
Attention: Switchgears are not protected against explosions and may be used only outside potentially explosive areas. | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Commissioning | Commissioning Drainage pumps | 2219491 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||
 Wilo-Live Assistant | Wilo-Live Assistant Service | 2216415 | |
The Wilo-Live Assistant is a technical advisor at your side during pump service. By using the Wilo-Live Assistant, our expert advisers can support you in the boiler or equipment room via video transmission – live and in real time. You use your smartphone to show the installation set-up, while the Wilo expert follows everything on their screen. They can see the components as well as other details and can thus determine where the fault or breakdown originates. We prevent downtime and ensure operational reliability of your pumps and systems! The Wilo-Live Assistant includes:
| |||
 Maintenance | Maintenance BASIC Drainage pumps | 2219540 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Drainage pumps | 2219514 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Drainage pumps | 2219567 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
More suitable services | |||
 Supervision | Supervision Drainage pumps | 2219348 | |
Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project. Supervision includes:
| |||
 Installation | Installation Drainage pumps | 2219383 | |
The Wilo service offers installation of our pumps or pumping systems. We offer an end-to-end process from gathering information on site to installing our product in the overall plant. An optimal installation set-up and the interaction of various individual factors lay the foundation for long-term operational safety. Installation includes:
| |||
 System Optimisation | System Optimisation Drainage pumps | 2219278 | |
The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:
| |||
 Energy Solutions | Energy Solutions Drainage pumps | 2219313 | |
Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:
| |||
 Repair | Repair Drainage pumps | 2219632 | |
Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system. Repair includes:
| |||