Multivert MVISE 806-3G | Wilo
Similar to figure

Multivert MVISE 806-3G

Technical data
Tender text

Multistage, non self-priming, vertical high-pressure centrifugal pump in in-line design with three-phase glandless pump motor and integrated frequency converter.

The integrated frequency converter enables variable speed control.

Control modes

  • Mode 1: Manual speed control with rotary knob
  • Mode 2: Pressure control via 4-20 mA or 0-10 V sensor signal or other control (temperature, volume flow, etc.) possible, setpoint adjustment with rotary knob or an external 0-10 V or 4-20 mA signal
  • Mode 3: Speed control via external 0- 20 mA or 0-10 V signal

A short-circuit-proof +24 V voltage output with max. contact strength of 50 mA is present on the electronic module. The module has potential-free contacts for SSM and SBM, potential-free contacts for external ON/OFF operation as well as integrated motor protection with detection of missing phase, detection of low water and display of the error code on the display. A plug-in position for Wilo IF-Modules PLR, LON for connection to building automation is present.

The pump has a self-venting, compact design with a continuous motor/pump shaft and bearings on the motor side. All hydraulic parts which come into contact with the fluid are made of stainless steel. The connection is established by means of oval flanges.

The pump is suitable for water and pressure boosting.

Special features/product advantages

  • Glandless pump technology
  • Virtually noiseless operation (up to 20 dB [A] quieter than conventional pumps)
  • Space-saving, compact design
  • Virtually maintenance free thanks to a design which does not feature any mechanical seals
  • Drinking water approval for all components that come in contact with the fluid (EPDM version)

Scope of delivery

  • Wilo-Multivert MVISE high-pressure multistage centrifugal pump
  • Installation and operating instructions
  • Stainless steel oval counter flanges with the corresponding screws, nuts and gaskets

Design notes

  • Optional plug-in IF-Modules
  • Sensors are available as accessories.
Product data
Min. fluid temperature Tmin -15 °C
Max. fluid temperature Tmax 50 °C
Max. ambient temperature Tmax 50 °C
Maximum operating pressure PN 16 bar
Maximum inlet pressure p inl 10 bar
Motor data
Electromagnetic compatibility EN 61000-6-1, -2, -3, -4
Mains connection 3~400 V, 50/60 Hz
Voltage tolerance ±10 %
Rated power P2 2 kW
Rated current IN 6.5 A
Min. speed nmin 1000 1/min
Max. speed nmax 2900 1/min
Insulation class F
Protection class IP44
Pump housing Stainless steel
Impeller Stainless steel
Shaft Stainless steel
Gasket material EPDM
Installation dimensions
Pipe connection on the suction side DNs G 1½
Pipe connection on the discharge side DNd G 1½
Ordering information
Brand Wilo
Product description Multivert MVISE 806-3G
Net weight, approx. m 35 kg
Article number 4225630

Installation and operating instructions


Article Number 4230106
Edition 2019-05
Page format 209.9 x 297.0 mm
Number of pages 228
PDF (11 MB)

Certificate REACH (Documents)

REACH Regulation

Edition 2021-05
Page format 209.9 x 297.0 mm
Number of pages 4
PDF (212 KB)