VeroLine-IPH-O
In-line pump
- Self-cooled mechanical seal, independent of direction of rotation
- Great variety of applications due to a wide fluid temperature range without additional wearing parts
Wilo-VeroLine-IPH-O/-W
Number of results: [17]
Nominal flange diameter
Motor efficiency class
Port-to-port length L0
Rated power P2
Number of poles
Recommended services
VeroLine-IPH-O/-W
Design
Glanded pump in in-line design with flange connectionApplication
For pumping heat transfer oil in closed industrial circulation systemsType key
Example | IPH‐O 65/125‐1.1/4 |
IPH‐O | In-line pump for heat transfer oil |
65 | Nominal diameter DN of the pipe connection |
125 | Impeller diameter |
1,1 | Nominal motor power P2 in kW |
4 | Number of poles |
Technical data
- Permissible temperature range ‐10 °C to +350 °C at max. 9 bar
- Mains connection 3~400 V, 50 Hz (others on request)
- IP rating IP55
- Nominal diameter DN 20 to DN 80
Materials
- Pump housing: Cast steel 1.0625
- Lantern: EN-GJS-400-15
- Impeller: EN-GJL-250
- Shaft: Stainless steel 1.4005
- Mechanical seal: AQ1VGG; other mechanical seals on request
Construction
Single-stage, low-pressure centrifugal pump in in-line design with
- Mechanical seal
- Flange connection
- Lantern
- Motor with special shaft
Scope of delivery
- Pump
- Installation and operating instructions
- Prewelding counter flanges
- Flange seals
Accessories
- PTC thermistor sensors, PTC resistor tripping relays, special motors