D56/250-40M | Wilo

D56/250-40M

Number of results: 3

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Yonos MAXO-D 32/0,5-7 PN 6/10	Stratos MAXO-D 40/0,5-8 PN 6/10	Yonos MAXO-D 40/0,5-8 PN 6/10	D56/250-40M
Article number	2160585	2164649	2120664	505824041
Series	Wilo-Yonos MAXO-D	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	220 mm	220 mm	220 mm	250 mm
Pump connection	DN 32	DN 40	DN 40	-
Display	LED segment display	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Change piping	Change piping	Change piping	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Constant speed (3 speed stages)	-	Constant speed (3 speed stages)	-
	-	Q limit for limiting the maximum volume flow	-	-
	-	Dynamic Adapt plus	-	-
	-	ΔT-const. for constant differential temperature control	-	-
	-	T-const. for constant temperature control	-	-
	-	Constant Q for constant volume flow control	-	-
	-	Multi Flow Adaptation	-	-
	-	Δ T-const. for constant differential temperature control	-	-
	-	User-defined PID control	-	-
	-	Constant speed (n-const.)	-	-
Special features of the series	-	Heating/Cooling switching	-	-
	-	Night set back	-	-
	-	Heat quantity measurement	-	-
	-	Cooling quantity measurement	-	-
	-	Key locking function	-	-
	-	No-Flow Stop	-	-
	-	Reset function to factory setting	-	-
	-	Adjustable volume flow limiter	-	-
	-	Ability to save and restore configured pump settings (3 restoration points)	-	-
	-	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	Main/Standby	Main/Standby	-
	-	Parallel operation	-	-
Measurement value logging	-	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	Setpoint	-
	-	Actual delivery head	-	-
	-	Actual volume flow	-	-
	-	Actual power consumption	-	-
	-	Energy consumption	-	-
	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	-	Warning messages in plain text (display status: yellow)	-	-
	-	Error messages in plain text (display: red)	-	-
	-	Pump venting (display status: blue)	-	-
	-	Control mode	-	-
	-	Active influences (e.g. STOP)	-	-
Display (can also be selected)	-	Speed	-	-
	-	Heating quantity	-	-
	-	Cooling quantity	-	-
	-	Operating hours	-	-
	-	Mains voltage	-	-
	-	Warning message	-	-
	-	Error message	-	-
Pump venting function	-	Yes	-	-
Dry-running detection	-	yes	-	-
Equipment
Thermal insulation shell	-	No	-	-
Cold water insulation shell	-	No	-	-
Quick electrical connection	Wilo plug	Wilo Connector	Wilo plug	-
Blocking-current proof motor	-	yes	-	-
Particle filter	-	yes	-	-
Key lock	-	yes	-	-
Fluid temperature sensor	-	Integrated	-	-
Connectivity
Analogue signal as standard	-	0-10 V	-	-
	-	2-10 V	-	-
	-	4-20 mA	-	-
	-	0-20 mA	-	-
	-	PT1000	-	-
Digital output	SSM	SSM	SSM	-
	SSM/SBM (via accessories Connect module Yonos MAXO)	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-
	-	SBM	-	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
	-	Ext. MAX	-	-
	-	Ext. MIN	-	-
	-	Ext. OFF	-	-
	-	Key lock	-	-
	-	MANUAL (BMS-OFF)	-	-
	-	Switchover between heating/cooling mode	-	-
Bus communication via additional accessories	-	BACnet MS/TP	-	-
	-	LON	-	-
	-	Modbus RTU	-	-
	-	CANopen	-	-
	-	PLR	-	-
	-	BACnet IP	-	-
	-	Modbus TCP	-	-
Access via the Wilo-Assistant app	-	Yes	-	-
Connection for Wilo-Smart Cloud	-	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	-	Bluetooth	-	-
Motor data
Phases	1	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50 Hz
Energy efficiency index (EEI) %%fn=footnote%%	≤0,23	≤0,18	≤0,23	-
Min current	0,08 A	0,11 A	0,15 A	-
Max current	1 A	1,2 A	1,33 A	-
Rated power	85 W	229 W	230 W	-
Min. speed	1000 1/min	750 1/min	1200 1/min	-
Max. speed	3700 1/min	3750 1/min	4800 1/min	-
Power consumption	5 W	7 W	10 W	-
Power consumption	120 W	280 W	305 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	F	-
Protection class	IPX4D	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	Grey cast iron	-
Impeller	PPE/PS-GF30	PPS-GF40	PPS-GF40	-
Shaft	Stainless steel	1.4122, DLC-coated	Stainless steel	-
Bearing	Carbon, metal-impregnated	Carbon, antimony-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	DN 32	DN 40	DN 40	DN 40
PN connection on suction side	PN 6/10	PN 6/10	PN 6/10	-
Outlet connection	DN 32	DN 40	DN 40	DN 40
PN connection on discharge side	PN 6/10	PN 6/10	PN 6/10	-
Dimension, weight
Length with packaging	400 mm	800 mm	600 mm	-
Length	220 mm	220 mm	220 mm	-
Height with packaging	395 mm	394 mm	395 mm	-
Height	232 mm	342 mm	341 mm	-
Width with packaging	300 mm	600 mm	400 mm	-
Width	240 mm	420 mm	269 mm	-
Gross weight, approx.	12,2 kg	27,6 kg	19,3 kg	-
Net weight, approx.	10,4 kg	23,1 kg	17,5 kg	-
Ordering information
Product description	Yonos MAXO-D 32/0,5-7 PN 6/10	Stratos MAXO-D 40/0,5-8 PN 6/10	Yonos MAXO-D 40/0,5-8 PN 6/10	D56/250-40M
Brand	Wilo	Wilo	Wilo	DAB
EAN number	4048482577913	4048482699912	4048482274898	-
Article number	2160585	2164649	2120664	505824041

Data sheet

Description
Product description	D56/250-40M
Brand	DAB
Article number	505824041
Port-to-port length l0	250 mm

Motor data
Phases	1
Mains connection	1~230 V, 50 Hz

Pipe connection
Inlet connection	DN 40
PN connection on suction side	-
Outlet connection	DN 40
PN connection on discharge side	-

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.