MAGNA1 D 80-60 F | Wilo

MAGNA1 D 80-60 F

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless premium smart twin-head pump	Glandless standard high-efficiency pump	Existing pump



Description
Product description	Stratos MAXO-D 80/0,5-6 PN 6	Yonos MAXO-D 80/0,5-6 PN 6	MAGNA1 D 80-60 F
Article number	2164660	2163260	99221414, 99221418
Series	Wilo-Stratos MAXO-D	Wilo-Yonos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length	360 mm	360 mm	360 mm
Pump connection	DN 80	DN 80	-
Display	Graphic colour display (4.3 inches)	LED segment display	-
Comment	Fits without modifications	Fits without modifications	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-
	Dynamic Adapt plus	-	-
	ΔT-const. for constant differential temperature control	-	-
	T-const. for constant temperature control	-	-
	Constant Q for constant volume flow control	-	-
	Multi Flow Adaptation	-	-
	Δ T-const. for constant differential temperature control	-	-
	User-defined PID control	-	-
	Constant speed (n-const.)	-	-
	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-
	Night set back	-	-
	Heat quantity measurement	-	-
	Cooling quantity measurement	-	-
	Key locking function	-	-
	No-Flow Stop	-	-
	Reset function to factory setting	-	-
	Adjustable volume flow limiter	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-
	Fault message and warning message in plain text including suggested remedy	-	-
Multi pump operation	Main/Standby	Main/Standby	-
	Parallel operation	-	-
Measurement value logging	Heat and cooling capacity measurement	-	-
Display	Setpoint	Setpoint	-
	Actual delivery head	-	-
	Actual volume flow	-	-
	Actual power consumption	-	-
	Energy consumption	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-
	Warning messages in plain text (display status: yellow)	-	-
	Error messages in plain text (display: red)	-	-
	Pump venting (display status: blue)	-	-
	Control mode	-	-
	Active influences (e.g. STOP)	-	-
Display (can also be selected)	Speed	-	-
	Heating quantity	-	-
	Cooling quantity	-	-
	Operating hours	-	-
	Mains voltage	-	-
	Warning message	-	-
	Error message	-	-
Pump venting function	Yes	-	-
Dry-running detection	yes	-	-
Equipment
Thermal insulation shell	No	-	-
Cold water insulation shell	No	-	-
Quick electrical connection	Wilo Connector	Wilo plug	-
Blocking-current proof motor	yes	-	-
Particle filter	yes	-	-
Key lock	yes	-	-
Fluid temperature sensor	Integrated	-	-
Connectivity
Analogue signal as standard	0-10 V	-	-
	2-10 V	-	-
	4-20 mA	-	-
	0-20 mA	-	-
	PT1000	-	-
Digital output	SSM	SSM	-
	SBM	-	-
	-	SSM/SBM (via accessories Connect module Yonos MAXO)	-
Digital input	Ext. MAX	-	-
	Ext. MIN	-	-
	Ext. OFF	-	-
	Key lock	-	-
	MANUAL (BMS-OFF)	-	-
	Switchover between heating/cooling mode	-	-
	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-
	LON	-	-
	Modbus RTU	-	-
	CANopen	-	-
	PLR	-	-
	BACnet IP	-	-
	Modbus TCP	-	-
Access via the Wilo-Assistant app	Yes	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-
wire data exchange and remote operation	Bluetooth	-	-
Motor data
Phases	1	1	1
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz
Energy efficiency index (EEI) %%fn=footnote%%	≤0,18	≤0,23	-
Min current	0,3 A	0,3 A	-
Max current	3,71 A	3,5 A	-
Rated power	739 W	670 W	-
Min. speed	500 1/min	900 1/min	-
Max. speed	2350 1/min	2400 1/min	-
Power consumption	20 W	40 W	-
Power consumption	850 W	800 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	Cast iron
Impeller	PPS-GF40	PP-LGF50	-
Shaft	Stainless steel	Stainless steel	-
Bearing	Carbon, antimony-impregnated	Carbon, metal-impregnated	-
Pipe connection
Inlet connection	DN 80	DN 80	DN 80
PN connection on suction side	PN 6	PN 6	PN 6
Outlet connection	DN 80	DN 80	DN 80
PN connection on discharge side	PN 6	PN 6	PN 6
Dimension, weight
Length with packaging	800 mm	550 mm	-
Length	360 mm	360 mm	-
Height with packaging	525 mm	425 mm	-
Height	463 mm	439 mm	-
Width with packaging	600 mm	530 mm	-
Width	570 mm	424 mm	-
Gross weight, approx.	68,3 kg	60,6 kg	-
Net weight, approx.	63 kg	56,6 kg	-
Ordering information
Product description	Stratos MAXO-D 80/0,5-6 PN 6	Yonos MAXO-D 80/0,5-6 PN 6	MAGNA1 D 80-60 F
Brand	Wilo	Wilo	Grundfos
EAN number	4048482700021	4048482617299	-
Article number	2164660	2163260	99221414, 99221418

Data sheet

Description
Product description	MAGNA1 D 80-60 F
Brand	Grundfos
Article number	99221414, 99221418
Port-to-port length l0	360 mm

Motor data
Phases	1
Mains connection	1~230 V, 50/60 Hz

Materials
Material	Cast iron

Pipe connection
Inlet connection	DN 80
PN connection on suction side	PN 6
Outlet connection	DN 80
PN connection on discharge side	PN 6

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.