UP 40-80 FB | Wilo

UP 40-80 FB

Number of results: 3

Flow

Head

Product design type	Glandless premium smart-pump	Glandless standard pump	Glandless standard high-efficiency pump	-



Description
Product description	Stratos MAXO-Z 40/0,5-8 PN 6/10	TOP-Z 40/7 (1~230 V, PN 6/10, RG)	Yonos MAXO-Z 40/0,5-8 PN 6/10	UP 40-80 FB
Article number	2164674	2046637	2175542	52022405
Series	Wilo-Stratos MAXO-Z	Wilo-TOP-Z	Wilo-Yonos MAXO-Z	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	220 mm	250 mm	220 mm	250 mm
Pump connection	DN 40	DN 40	DN 40	-
Display	Graphic colour display (4.3 inches)	-	LED segment display	-
Comment	F1+F1-MS (DN40_DN40_30)	Change piping	F1+F1-MS (DN40_DN40_30)	-
Fitting piece (PN6 MS)	1 x 2060865 Intermediate flange pieces F 1-MS, DN 40x30mm, PN 6	-	1 x 2060865 Intermediate flange pieces F 1-MS, DN 40x30mm, PN 6	-
Function
Control mode	Δp-v for variable differential pressure	-	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	-	Δp-c for constant differential pressure	-
	Q limit for limiting the maximum volume flow	-	-	-
	Dynamic Adapt plus	-	-	-
	ΔT-const. for constant differential temperature control	-	-	-
	T-const. for constant temperature control	-	-	-
	Constant Q for constant volume flow control	-	-	-
	Multi Flow Adaptation	-	-	-
	Δ T-const. for constant differential temperature control	-	-	-
	User-defined PID control	-	-	-
	Constant speed (n-const.)	-	-	-
	-	-	Constant speed (3 speed stages)	-
Special features of the series	Heating/Cooling switching	-	-	-
	Thermal desinfection	-	-	-
	Night set back	-	-	-
	Heat quantity measurement	-	-	-
	Cooling quantity measurement	-	-	-
	Key locking function	-	-	-
	No-Flow Stop	-	-	-
	Adjustable volume flow limiter	-	-	-
	Ability to save and restore configured pump settings (3 restoration points)	-	-	-
	Fault and warning messages shown in plain text with advice on resolving the issue	-	-	-
Multi pump operation	Main/Standby	-	-	-
	Parallel operation	-	-	-
	-	-	Main/Standby (with Connect Module Yonos MAXO)	-
Measurement value logging	Heat and cooling capacity measurement	-	-	-
Display	Setpoint	-	Setpoint	-
	Actual delivery head	-	-	-
	Actual volume flow	-	-	-
	Actual power consumption	-	-	-
	Energy consumption	-	-	-
	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-	-	-
	Control mode	-	-	-
	Active influences (e.g. STOP)	-	-	-
Display (can also be selected)	Speed	-	-	-
	Heating quantity	-	-	-
	Cooling quantity	-	-	-
	Operating hours	-	-	-
	Mains voltage	-	-	-
	Warning message	-	-	-
	Error message	-	-	-
Pump venting function	Yes	-	-	-
Dry-running detection	yes	-	-	-
Equipment
Thermal insulation shell	Yes	-	-	-
Cold water insulation shell	As accessories	-	-	-
Quick electrical connection	Wilo Connector	-	Wilo plug	-
Connectivity
Analogue signal as standard	0-10 V	-	-	-
	2-10 V	-	-	-
	4-20 mA	-	-	-
	0-20 mA	-	-	-
	PT1000	-	-	-
Digital output	SSM	-	SSM	-
	SBM	-	-	-
	-	-	SBM (via Connect module)	-
Digital input	Ext. OFF	-	-	-
	Ext. MIN	-	-	-
	Ext. MAX	-	-	-
	MANUAL (BMS-OFF)	-	-	-
	Key lock	-	-	-
	Switchover between heating/cooling mode	-	-	-
	-	-	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-
Bus communication via additional accessories	BACnet MS/TP	-	-	-
	LON	-	-	-
	Modbus RTU	-	-	-
	CANopen	-	-	-
	PLR	-	-	-
	BACnet IP	-	-	-
	Modbus TCP	-	-	-
Access via the Wilo-Assistant app	No	-	-	-
Connection for Wilo-Smart Cloud	Via Wilo-Smart Gateway	-	-	-
wire data exchange and remote operation	Bluetooth	-	-	-
Motor data
Phases	1	1	1	3
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50 Hz	1~230 V, 50/60 Hz	-
Energy efficiency index (EEI)	≤0.19	-	≤0.20	-
Min current I_min	0.11 A	1.51 A	0.15 A	-
Max current I_max	1.2 A	1.62 A	1.33 A	-
Rated power P₂	229 W	180 W	230 W	-
Min. speed n_min	750 1/min	2400 1/min	1200 1/min	-
Max. speed n_max	3750 1/min	2700 1/min	4800 1/min	-
Power consumption P_{1 min}	7 W	175 W	10 W	-
Power consumption P_{1 max}	280 W	340 W	305 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61000-6-3	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61000-6-2	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Electromagnetic compatibility	-	EN 61800-3	-	-
Insulation class	F	H	F	-
Protection class	IPX4D	IPX4D	IPX4D	-
Materials
Material	Stainless steel	Bronze, CC499K	Stainless steel	-
Impeller	PPS-GF40	PPE-GF30	PPS-GF40	-
Shaft	1.4122, DLC-coated	Stainless steel	Stainless steel	-
Bearing	Carbon-graphite	Carbon, synthetic resin-impregnated	Carbon, synthetic resin-impregnated	-
Pipe connection
Inlet connection	DN 40	DN 40	DN 40	DN 40
PN connection on suction side	PN 6/10	PN 10	PN 6/10	PN 6
Outlet connection	DN 40	DN 40	DN 40	DN 40
PN connection on discharge side	PN 6/10	PN 10	PN 6/10	PN 6
Dimension, weight
Length with packaging	800 mm	350 mm	300 mm	-
Length L	370 mm	250 mm	245 mm	-
Height with packaging	394 mm	260 mm	400 mm	-
Height H	220 mm	273 mm	277 mm	-
Width with packaging	600 mm	225 mm	263 mm	-
Width W	227 mm	204 mm	150 mm	-
Gross weight, approx. m	17.9 kg	14.2 kg	13 kg	-
Net weight, approx. m	13.4 kg	13 kg	11.4 kg	-
Ordering information
Product description	Stratos MAXO-Z 40/0,5-8 PN 6/10	TOP-Z 40/7 (1~230 V, PN 6/10, RG)	Yonos MAXO-Z 40/0,5-8 PN 6/10	UP 40-80 FB
Brand	Wilo	Wilo	Wilo	Grundfos
EAN number	4048482700168	4016322685487	4048482739823	-
Article number	2164674	2046637	2175542	52022405

Data sheet

Description
Product description	UP 40-80 FB
Brand	Grundfos
Article number	52022405
Port-to-port length l0	250 mm

Motor data
Phases	3

Pipe connection
Inlet connection	DN 40
PN connection on suction side	PN 6
Outlet connection	DN 40
PN connection on discharge side	PN 6

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.