UPCD 40-60 PN6 3~ | Wilo

UPCD 40-60 PN6 3~

Number of results: 2

Flow

Head / Pump pressure

Product design type	Glandless standard high-efficiency pump	Glandless premium smart twin-head pump	Existing pump



Description
Product description	Yonos MAXO-D 40/0,5-8 PN 6/10	Stratos MAXO-D 40/0,5-8 PN 6/10	UPCD 40-60 PN6 3~
Article number	2120664	2164649	-
Series	Wilo-Yonos MAXO-D	Wilo-Stratos MAXO-D	-
Mains connection	1~230 V ±10%, 50/60 Hz	1~230 V ±10%, 50/60 Hz	-
Port-to-port length l0	220 mm	220 mm	250 mm
Pump connection	DN 40	DN 40	-
Display	LED segment display	Graphic colour display (4.3 inches)	-
Comment	Fits with fitting piece accessories without any modification of piping Check electrical connection	Fits with fitting piece accessories without any modification of piping Check electrical connection	-
Fitting piece (PN6)	1 x 110586593 Intermediate flange pieces F 1, DN 40x30mm, PN 6	1 x 110586593 Intermediate flange pieces F 1, DN 40x30mm, PN 6	-
Function
Control mode	Δp-v for variable differential pressure	Δp-v for variable differential pressure	-
	Δp-c for constant differential pressure	Δp-c for constant differential pressure	-
	Constant speed (3 speed stages)	-	-
	-	Q limit for limiting the maximum volume flow	-
	-	Dynamic Adapt plus	-
	-	ΔT-const. for constant differential temperature control	-
	-	T-const. for constant temperature control	-
	-	Constant Q for constant volume flow control	-
	-	Multi Flow Adaptation	-
	-	Δ T-const. for constant differential temperature control	-
	-	User-defined PID control	-
	-	Constant speed (n-const.)	-
Special features of the series	-	Heating/Cooling switching	-
	-	Night set back	-
	-	Heat quantity measurement	-
	-	Cooling quantity measurement	-
	-	Key locking function	-
	-	No-Flow Stop	-
	-	Reset function to factory setting	-
	-	Adjustable volume flow limiter	-
	-	Ability to save and restore configured pump settings (3 restoration points)	-
	-	Fault message and warning message in plain text including suggested remedy	-
Multi pump operation	Main/Standby	Main/Standby	-
	-	Parallel operation	-
Measurement value logging	-	Heat and cooling capacity measurement	-
Display	Setpoint	Setpoint	-
	-	Actual delivery head	-
	-	Actual volume flow	-
	-	Actual power consumption	-
	-	Energy consumption	-
	-	Temperature (version “-R7”: current fluid temperature possible with Stratos MAXO temperature sensor)	-
	-	Warning messages in plain text (display status: yellow)	-
	-	Error messages in plain text (display: red)	-
	-	Pump venting (display status: blue)	-
	-	Control mode	-
	-	Active influences (e.g. STOP)	-
Display (can also be selected)	-	Speed	-
	-	Heating quantity	-
	-	Cooling quantity	-
	-	Operating hours	-
	-	Mains voltage	-
	-	Warning message	-
	-	Error message	-
Pump venting function	-	Yes	-
Dry-running detection	-	yes	-
Equipment
Thermal insulation shell	-	No	-
Cold water insulation shell	-	No	-
Quick electrical connection	Wilo plug	Wilo Connector	-
Blocking-current proof motor	-	yes	-
Particle filter	-	yes	-
Key lock	-	yes	-
Fluid temperature sensor	-	Integrated	-
Connectivity
Analogue signal as standard	-	0-10 V	-
	-	2-10 V	-
	-	4-20 mA	-
	-	0-20 mA	-
	-	PT1000	-
Digital output	SSM/SBM (via accessories Connect module Yonos MAXO)	-	-
	-	SSM	-
	-	SBM	-
Digital input	Ext. OFF (via accessories Wilo-Connect module Yonos MAXO)	-	-
	-	Ext. OFF	-
	-	Ext. MIN	-
	-	Ext. MAX	-
	-	MANUAL (BMS-OFF)	-
	-	Key lock	-
	-	Switchover between heating/cooling mode	-
Bus communication via additional accessories	-	BACnet MS/TP	-
	-	LON	-
	-	Modbus RTU	-
	-	CANopen	-
	-	PLR	-
	-	BACnet IP	-
	-	Modbus TCP	-
Access via the Wilo-Assistant app	-	Yes	-
Connection for Wilo-Smart Cloud	-	Via Wilo-Smart Gateway	-
wire data exchange and remote operation	-	Bluetooth	-
Motor data
Phases 2	1	1	3
Mains connection	1~230 V, 50/60 Hz	1~230 V, 50/60 Hz	3~400 V, 50 Hz
Energy efficiency index (EEI)	≤0.23	≤0.18	-
Min current I_min	0.15 A	0.11 A	-
Max current I_max	1.33 A	1.2 A	-
Rated power P₂	230 W	229 W	-
Min. speed n_min	1200 1/min	750 1/min	-
Max. speed n_max	4800 1/min	3750 1/min	-
Power consumption P_{1 min}	10 W	7 W	-
Power consumption P_{1 max}	305 W	280 W	-
Emitted interference	EN 61800-3;2004+A1;2012 /residential area (C1)	EN 61800-3;2004+A1;2012 /residential area (C1)	-
Interference resistance	EN 61800-3;2004+A1;2012 /industrial environment (C2)	EN 61800-3;2004+A1;2012 /industrial environment (C2)	-
Insulation class	F	F	-
Protection class	IPX4D	IPX4D	-
Materials
Material	Grey cast iron	Grey cast iron	-
Impeller	PPS-GF40	PPS-GF40	-
Shaft	Stainless steel	1.4122, DLC-coated	-
Bearing	Carbon, metal-impregnated	Carbon, antimony-impregnated	-
Pipe connection
Inlet connection	DN 40	DN 40	DN 40
PN connection on suction side	PN 6/10	PN 6/10	PN 6
Outlet connection	DN 40	DN 40	DN 40
PN connection on discharge side	PN 6/10	PN 6/10	PN 6
Dimension, weight
Length with packaging	600 mm	800 mm	-
Length L	220 mm	220 mm	-
Height with packaging	395 mm	394 mm	-
Height H	341 mm	342 mm	-
Width with packaging	400 mm	600 mm	-
Width W	269 mm	420 mm	-
Gross weight, approx. m	19.3 kg	27.6 kg	-
Net weight, approx. m	17.5 kg	23.1 kg	-
Ordering information
Product description	Yonos MAXO-D 40/0,5-8 PN 6/10	Stratos MAXO-D 40/0,5-8 PN 6/10	UPCD 40-60 PN6 3~
Brand	Wilo	Wilo	Grundfos
EAN number	4048482274898	4048482699912	-
Article number	2120664	2164649	-

Data sheet

Description
Product description	UPCD 40-60 PN6 3~
Brand	Grundfos
Port-to-port length l0	250 mm

Motor data
Phases 2	3
Mains connection	3~400 V, 50 Hz

Pipe connection
Inlet connection	DN 40
PN connection on suction side	PN 6
Outlet connection	DN 40
PN connection on discharge side	PN 6

Take advantage of the latest replacement guide

The current replacement guide on all glandless pumps for heating and drinking water applications makes choosing the right pump easier for you. Here, you will find a suitable new Wilo pump for all known pumps built after 1975.

After entering your old pump data, select the current pump type.