Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
CronoTwin-DL 50/270-3/4 | Wilo
Similar to figure

CronoTwin-DL 50/270-3/4

Article number: 2120951
Technical data
Hydraulic data
Minimum efficiency index (MEI) ≥0.4
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Motor data
Mains connection 3~400 V, 50 Hz
Number of poles 4
Voltage tolerance ±10 %
Motor efficiency class IE3
Rated power P2 3 kW
Rated current IN 6.4 A
Rated speed n 1450 1/min
Power factor cos φ100 0.76
Motor efficiency 50% ηM 50% 85.9 %
Motor efficiency 75% ηM 75% 87.9 %
Motor efficiency 100% ηM 100% 87.7 %
Motor winding up to 3 kW -
Motor winding from 4 kW -
Insulation class F
Protection class motor IP55
Motor protection no
Materials
Pump housing Grey cast iron
Impeller Grey cast iron EN-GJL-200
Shaft Stainless steel
Mechanical seal AQ1EGG
Lantern Grey cast iron
Installation dimensions
Pipe connection on the suction side DNs DN 50
Pipe connection on the discharge side DNd DN 50
Port-to-port length L0 440 mm

CronoTwin-DL 50/270-3/4

∆: Connection diagram delta connection

Y: Connection diagram star connection

Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.

P2≤ 3 kW 3~400 V Y
  3~230 V ∆
P2≥ 4 kW 3~690 V Y
  3~400 V ∆

After removing the bridges, Y-∆ start is possible.

Product data
Brand Wilo
Product description CronoTwin-DL 50/270-3/4
Article number 2120951
EAN number 4048482218625
Colour Green
Minimum order quantity 1
Date of sales availability 2015-09-01
Packaging
Packaging type Euro pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1200 mm
Length L 682 mm
Height with packaging 800 mm
Height H 440 mm
Width with packaging 800 mm
Width W 751 mm
Gross weight, approx. m 231 kg
Net weight, approx. m 185 kg
Tender text

In-line twin-head pump with two single-stage glanded centrifugal pumps in the same housing with switchover valve, for pipe installation or installation on a base. Housing blind flange and mounting brackets available at additional charge. Low-vibration and low-noise monobloc design with lantern and rigidly connected standard flange motor (standard motor). With forced-flow circulation, bidirectional bellows mechanical seal and cavitation-reducing impeller. Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.

Motors in IE3 technology as standard. Pump with motor ≥ 5.5 kW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 kW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 kW are always made of metal.

Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 140 °C
Min. ambient temperature Tmin -15 °C
Max. ambient temperature Tmax 40 °C
Maximum operating pressure PN 16 bar
Note on dimensioning 16 bar to 120 °C, 13 bar to 140 °C
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE3
Mains connection 3~400 V, 50 Hz
Voltage tolerance ±10 %
Rated power P2 3000 W
Rated speed n 1450 1/min
Rated current IN 6.4 A
Power factor cos φ100 0.76
Motor efficiency 50% ηM 50% 85.9 %
Motor efficiency 75% ηM 75% 87.9 %
Motor efficiency 100% ηM 100% 87.7 %
Insulation class F
Protection class IP55
Materials
Pump housing Grey cast iron
Impeller Grey cast iron
Shaft Stainless steel
Shaft seal AQ1EGG
Lantern Grey cast iron
Installation dimensions
Pipe connection on the suction side DNs DN 50
Pipe connection on the discharge side DNd DN 50
Ordering information
Brand Wilo
Product description CronoTwin-DL 50/270-3/4
Net weight, approx. m 185 kg
Article number 2120951
Documents

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (327 KB)

Acustic Spectrum (Octave band)

CronoTwin-DL 50/270-3/4

Number of pages 1
Language language neutral
PDF (165 KB)
BIM/CAD

3D_DWG

DL50/270-3/4

Language language neutral
DWG (2 MB)

3D_STEP

DL50/270-3/4

Language language neutral
STP (3 MB)

2D_DWG_TOP

DL50/270-3/4

Language language neutral
DWG (21 KB)

2D_DWG_FRONT

DL50/270-3/4

Language language neutral
DWG (24 KB)

2D_DWG_RIGHT

DL50/270-3/4

Language language neutral
DWG (27 KB)
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CC-HVAC system (27)

Continuous, infinitely variable control, temperature-dependent CC-HVAC system (23)

Continuous, infinitely variable control, differential pressure-sensitive SC-HVAC system (25)

Continuous, infinitely variable control, temperature-dependent SC-HVAC system (19)

Pipe installation, adapter fitting (5)

Wall fixation/installation on a base (1)

Maintenance/replacement mechanical accessories (1)

Pump control (1)

Pump control/accessories (29)

Pump control/Comfort control system (4)

Pump control/Smart control system (8)

Differential pressure detection (5)

Motor protection (2)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Commissioning
Commissioning Glanded pumps
    
2219391

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.