Search
Contact
E-mail
Catalogue creation
My favorites
Product comparison
Yonos GIGA2.0-D 32/1-12/0,55-R1-S1 | Wilo

Yonos GIGA2.0-D 32/1-12/0,55-R1-S1

Article number: 2206038
Technical data
Hydraulic data
Minimum efficiency index (MEI) ≥0.4
Maximum operating pressure PN 16 bar
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 120 °C
Min. ambient temperature Tmin 0 °C
Max. ambient temperature Tmax 50 °C
Drive
Mains connection 3~400 V, 50/60 Hz
Number of poles 4
Motor efficiency class IE5
Rated power P2 0.55 kW
Rated current IN 1.2 A
Rated speed n 2100 1/min
Max. speed nmax 2130 1/min
Power consumption P1 max 700 W
Emitted interference EN 61800-3
Interference resistance EN 61800-3
Insulation class F
Protection class motor IP55
Threaded cable connection 1 x M25x1.5
Materials
Pump housing Grey cast iron
Impeller PPE/PS-GF30
Shaft Stainless steel
Shaft seal Q1Q1X4GG
Lantern 5.1301/EN-GJL-250 KTL-coated
Approved liquids (other liquids upon request)
Heating water (as per VDI 2035) yes
Heat carrier oil Special version at additional charge
Cooling and cold water circulation systems yes
Water-glycol mixtures (at 20 – 40 vol. % glycol and fluid temperature ≤ 40 °C) yes
Installation dimensions
Port-to-port length L0 260 mm
Pipe connection on the suction side DNs DN 32
Pipe connection on the discharge side DNd DN 32

Yonos GIGA2.0-D 32/1-12/0,55-R1-S1

3~ 380 V...440 V, 50/60 Hz

Product data
Brand Wilo
Product description Yonos GIGA2.0-D 32/1-12/0,55-R1-S1
Article number 2206038
EAN number 4062679112411
Colour Green/black/grey
Minimum order quantity 1
Date of sales availability 2022-05-01
Packaging
Packaging type Euro pallet
Packaging property Transport packaging
Pieces per pallet 1
Number per layer 1
Dimension, weight
Length with packaging 1200 mm
Length L 516 mm
Height with packaging 520 mm
Height H 376 mm
Width with packaging 800 mm
Width W 692 mm
Gross weight, approx. m 74.4 kg
Net weight, approx. m 46.4 kg
Tender text

In-line pump with high energy efficiency with EC motor of energy efficiency class IE5 in accordance with IEC 60034-30-2, hydraulics with minimum efficiency index MEI ≥ 0.4 and electronic power adjustment in glanded pump design. The pump is configured as a single-stage low-pressure centrifugal pump with flange connection and mechanical seal. The Yonos GIGA2.0-D has been predominantly designed for pumping heating water (acc. to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, air conditioning and cooling systems.

Design ...-R1-S1

  • Single-stage low-pressure centrifugal pump with one-piece shaft in monobloc design
  • Spiral housing in in-line design (suction and discharge ports with the same flanges in a line)
  • PN 16 flange – in accordance with EN 1092-2
  • Pressure measuring connections (R 1/8) for retrofitting of a differential pressure sensor (version ...-R1 without differential pressure sensor)
  • Pump housing and lantern/motor flange with cataphoretic coating as standard
  • Mechanical seal S1 recommended for water-glycol mixtures with glycol proportions up to max. 50% by volume and a fluid temperature of -20 °C up to max. +90 °C – +110 °C and also if there is oil in the water-glycol mixture.
  • Connection voltages:
    • 3~440 V ±10 % 50/60 Hz; 3~400 V ±10 % 50/60 Hz; 3~380 V -5 % +10 % 50/60 Hz
    • Version M-: 1~220 V … 240 V (±10%), 50/60 Hz
  • Compliance with electromagnetic compatibility without additional measures
    • Interference emission for residential environment according to EN 61800-3:2018
    • Interference immunity for industrial environments according to EN 61800-3:2018

Control modes:

  • Variable differential pressure (dp-v)
  • Constant differential pressure (dp-c)
  • Constant speed (n-const.)
  • User-defined PID control
  • Only possible with differential pressure sensor:
    • Variable differential pressure (dp-v)
    • Constant differential pressure (dp-c)

Functions:

  • Operating modes of twin-head pump: Main/standby operation, efficiency-optimised parallel operation for dp-c and dp-v
  • Integrated full motor protection
  • Only possible with differential pressure sensor:
    • Efficiency-optimised parallel operation for dp-c and dp-v

Display in the "Home screen" of the graphic display:

  • Control mode currently set
  • Current setpoint
  • Current actual value
  • Current volume flow (only if a differential pressure sensor is connected)
  • Current power consumption

Version:

  • 1 analogue input: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA only for sensor value from differential pressure sensor
  • 1 analogue input: 0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA only for external setpoint sensor
  • 1 digital input (Ext. OFF)
  • 2 Signal relays for run signals and fault messages
  • Slot for Wilo-CIF modules with interfaces for building automation (BA) (optional accessories: CIF modules Ethernet, Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
  • Wilo Net as Wilo system bus for communication during twin-head pump operation
  • Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction
  • Rotatable, graphic colour display (2 inches) with one button manual operation level
  • Integrated dual pump management (twin-head pumps are prewired) connection via Wilo Net
  • Cable break detection when using an analogue signal (in connection with 2 ... 10 V or 4 ... 20 mA)
  • Standard condensate drainage holes in the motor housing (closed upon delivery)
  • Air vent valve on the lantern

Scope of delivery:

  • Pump
  • Installation and operating instructions and declaration of conformity

Accessories must be ordered separately:

3 mounting brackets with fixation material for installation on a base

  • Blind flanges for twin-head pump housing
  • For connection to building automation:
    • CIF module PLR
    • CIF module LON
    • CIF module BACnet MS/TP
    • Modbus RTU CIF module
    • CIF module CANopen
    • CIF module Ethernet Multi-protocol (Modbus TCP, BACnet/IP)
    • Connection M12 RJ45 CIF Ethernet
  • Differential pressure sensor DPS 2 ... 10 V
  • Differential pressure sensor DPS 4 ... 20 mA
Operating Data
Min. fluid temperature Tmin -20 °C
Max. fluid temperature Tmax 120 °C
Min. ambient temperature Tmin 0 °C
Max. ambient temperature Tmax 50 °C
Maximum operating pressure PN 16 bar
Minimum efficiency index (MEI) ≥0.4
Motor data
Motor efficiency class IE5
Emitted interference EN 61800-3
Interference resistance EN 61800-3
Mains connection 3~400 V, 50/60 Hz
Rated power P2 550 W
Max. speed nmax 2130 1/min
Rated current IN 1.2 A
Insulation class F
Protection class motor IP55
Motor protection PTC integrated
Materials
Pump housing Grey cast iron
Impeller PPE/PS-GF30
Shaft Stainless steel
Shaft seal Q1Q1X4GG
Lantern 5.1301/EN-GJL-250 KTL-coated
Installation dimensions
Pipe connection on the suction side DNs DN 32
Pipe connection on the discharge side DNd DN 32
Port-to-port length L0 260 mm
Ordering information
Brand Wilo
Product description Yonos GIGA2.0-D 32/1-12/0,55-R1-S1
Net weight, approx. m 46.4 kg
Article number 2206038
Documents

Installation and operating instructions

Wilo-Yonos GIGA2.0-I/-D

Article Number 2227301
Edition 2023-08
Number of pages 436
Language de, en, fr, nl
PDF (11 MB)

Certification booklet

Wilo-Stratos GIGA2.0-I/-D, Wilo-Stratos GIGA /-D/-B, Wilo-Yonos GIGA2.0-I/-D

Article Number 2216678
Edition 2022-11
Number of pages 52
Language language neutral
PDF (22 MB)

Group Statement

Group Statement REACH

Edition 2021-05
Number of pages 5
Language language neutral
PDF (279 KB)
BIM/CAD
Accessory

Continuous, infinitely variable control, differential pressure-sensitive CCe-HVAC system (26)

Continuous, infinitely variable control, temperature-dependent CCe-HVAC system (24)

Continuous, infinitely variable control, differential pressure-sensitive SCe-HVAC system (17)

Continuous, infinitely variable control, temperature-dependent SCe-HVAC system (13)

Wall fixation/installation on a base (1)

Maintenance/replacement mechanical accessories (1)

Pump control/accessories (27)

Pump control/Comfort control system (6)

Pump control/Smart control system (4)

Pump control/interface module (6)

Differential pressure detection (3)

Services

With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.

Read more

Recommended services

Supervision
Supervision Glanded pumps
    
2219321

Wilo supports during the concept phase to ensure quality work and cost efficiency. Our competent and qualified Wilo Service will support you with recommendations and technical advice throughout the entire project.

Supervision includes:

  • Regular on-site visits ensure the quality of information and advice
  • Technical consultancy, also available on site
  • Status report with recommendations after the visit
  • Comprehensive support from a Wilo expert
Commissioning
Commissioning Glanded pumps
    
2219391

For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:

  • Commissioning of system(s) according to checklist
  • Parameterisation and setting of switchgear
  • Testing and adaptation of initial compressing of pressure tanks (filling up to 80 litres incl.)
  • Functional check of fitted system(s)
  • Practice-oriented operation instruction
  • Wilo commissioning protocol

The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included.

Maintenance
Maintenance BASIC Glanded pumps
    
2219531

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance COMFORT Glanded pumps
    
2219493

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Review and, if necessary, adjustment of the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during normal service hours)

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

Maintenance PREMIUM Glanded pumps
    
2219546

In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:

  • Visual inspection of the pumps/systems
  • Mechanical check
  • Electrical check
  • Testing and possible filling of pressure vessels that may be on hand
  • Checking the system parameters
  • Creating a maintenance protocol
  • Consumable materials are included in the contract price
  • Elimination of payroll and travel expenses for deployments between maintenance intervals (during and outside normal service hours)
  • Software updates
  • Includes wearing parts

Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request.

More suitable services

Extended Warranty
Extended Warranty Glanded pumps
    
2219590

In combination of a new pump or system Wilo offers an extended warranty of up to five years in combination with commissioning and maintenance by the Wilo Service.

Extended warranty includes:

  • Full protection and predictable cost security
  • Regular maintenance work by the Wilo Service
System Optimisation
System Optimisation Glanded pumps
    
2219251

The Wilo Service offers proactive system optimisation by optimising settings and doing minor adjustments to ensure operational reliability. System Optimisation includes among others:

  • Overhaul of pumps/systems to restore full performance
  • Addition of new technologies or functions in older systems to save on capital expenditures (retrofitting)
Energy Solutions
Energy Solutions Glanded pumps
    
2219240

Wilo Service offers a proactive support to point out possible energy savings. Our service creates an overview of all installed assets to show how the energy consumption of pumps or systems can be reduced. We offer targeted consultancy and analysis, including the involvement of subsidies as well as comprehensive support around the changeover to high-efficiency technologies. Wilo-Energy solution includes:

  • Detailed assessment of the life cycle costs (LCC analysis)
  • Energy audit including information about energy saving potential
  • Proactive recommendation of replacement options
  • Improving the environmental performance of your system
  • Support in the changeover to Wilo high-efficiency pumps
Repair
Repair Glanded pumps
    
2219610

Wilo Service draws on their competence and experience while consulting on site to decide whether the pump can actually be repaired on site or has to be sent in for a factory repair. Wilo also provides spare parts or a replacement pump to restore the operational reliability of the system.

Repair includes:

  • Verification and elimination of error causes by experienced Wilo experts
  • Non-binding estimate for repairs
  • Electric-hydraulic test run to ensure correct data regarding functionality, quality and performance of the pump or system
  • Coating of various pump or system components for an optimised efficiency factor
  • Use of genuine spare parts only
  • Documentation of the repair in the service report